pub enum CanError {
InvalidIdLength {
max: u32,
got: u32,
},
DataTooLong {
max: usize,
got: usize,
},
InvalidDlc(u8),
FdBrsOnClassic,
RemoteFrameWithData,
BufferTooShort {
need: usize,
have: usize,
},
InvalidTiming(&'static str),
}Expand description
The single crate-level error for the frame codec and bit-timing calculator.
Variants§
InvalidIdLength
An identifier does not fit its width: 11-bit (standard) identifiers
top out at 0x7FF, 29-bit (extended) at 0x1FFF_FFFF. Also surfaces
for raw SocketCAN id words that carry bits outside the modeled space
(the CAN_ERR_FLAG error-frame class is not modeled; got is the
full id word, which then necessarily exceeds max).
Fields
DataTooLong
A payload does not fit the frame’s constraints: more than 8 bytes on
a classic frame, more than 64 bytes anywhere, or a CAN FD length that
is not one of the DLC-representable values (9–11, 13–15, … bytes are
not encodable). max is the largest length that would have fit.
Fields
InvalidDlc(u8)
A DLC value outside 0..=15, or a classic-frame length byte outside
0..=8.
Note: classic remote frames may legitimately carry a refined DLC
of 9–15 (the SocketCAN len8_dlc extension); this variant is for
values outside the representable space.
FdBrsOnClassic
A CAN FD-only flag (BRS or ESI) was set on a classic frame.
RemoteFrameWithData
A remote frame that carries data bytes, or a CAN FD frame marked as remote (CAN FD abolished remote frames — both violations surface here).
BufferTooShort
The buffer is shorter than the SocketCAN frame format requires
(16 bytes for struct can_frame, 72 for struct canfd_frame).
Fields
InvalidTiming(&'static str)
A bit-timing calculation was given impossible parameters (zero
baudrate, zero clock, a sample point outside (0, 1)) or no
configuration under the Bosch segment limits achieves the request.
Trait Implementations§
impl Copy for CanError
impl Eq for CanError
Source§impl Error for CanError
impl Error for CanError
1.30.0 · Source§fn source(&self) -> Option<&(dyn Error + 'static)>
fn source(&self) -> Option<&(dyn Error + 'static)>
1.0.0 · Source§fn description(&self) -> &str
fn description(&self) -> &str
use the Display impl or to_string()