Struct bounded_integer::BoundedI8

#[repr(transparent)]
pub struct BoundedI8<const MIN: i8, const MAX: i8>(_);

This is supported on crate feature types only.

An i8 constrained to be in the range MIN..=MAX.

Implementations

impl<const MIN: i8, const MAX: i8> Bounded<MIN, MAX>

pub const MIN_VALUE: i8

The smallest value this bounded integer can contain.

pub const MAX_VALUE: i8

The largest value that this bounded integer can contain.

pub const MIN: Self

The smallest value of the bounded integer.

pub const MAX: Self

The largest value of the bounded integer.

pub const unsafe fn new_unchecked(n: i8) -> Self

Creates a bounded integer without checking the value.

Safety

The value must not be outside the valid range of values; it must not be less than MIN_VALUE or greater than MAX_VALUE.

pub unsafe fn new_ref_unchecked(n: &i8) -> &Self

Creates a shared reference to a bounded integer from a shared reference to a primitive.

Safety

The value must not be outside the valid range of values; it must not be less than MIN_VALUE or greater than MAX_VALUE.

pub unsafe fn new_mut_unchecked(n: &mut i8) -> &mut Self

Creates a mutable reference to a bounded integer from a mutable reference to a primitive.

Safety

The value must not be outside the valid range of values; it must not be less than MIN_VALUE or greater than MAX_VALUE.

pub const fn in_range(n: i8) -> bool

Checks whether the given value is in the range of the bounded integer.

pub const fn new(n: i8) -> Option<Self>

Creates a bounded integer if the given value is within the range [MIN, MAX].

pub fn new_ref(n: &i8) -> Option<&Self>

Creates a reference to a bounded integer from a reference to a primitive if the given value is within the range [MIN, MAX].

pub fn new_mut(n: &mut i8) -> Option<&mut Self>

Creates a mutable reference to a bounded integer from a mutable reference to a primitive if the given value is within the range [MIN, MAX].

pub const fn new_saturating(n: i8) -> Self

Creates a bounded integer by setting the value to MIN or MAX if it is too low or too high respectively.

pub const fn get(self) -> i8

Returns the value of the bounded integer as a primitive type.

pub const fn get_ref(&self) -> &i8

Returns a shared reference to the value of the bounded integer.

pub unsafe fn get_mut(&mut self) -> &mut i8

Returns a mutable reference to the value of the bounded integer.

Safety

This value must never be set to a value beyond the range of the bounded integer.

pub fn abs(self) -> Self

Computes the absolute value of self, panicking if it is out of range.

pub fn pow(self, exp: u32) -> Self

Raises self to the power of exp, using exponentiation by squaring. Panics if it is out of range.

pub fn div_euclid(self, rhs: i8) -> Self

Calculates the quotient of Euclidean division of self by rhs. Panics if rhs is 0 or the result is out of range.

pub fn rem_euclid(self, rhs: i8) -> Self

Calculates the least nonnegative remainder of self (mod rhs). Panics if rhs is 0 or the result is out of range.

pub const fn checked_add(self, rhs: i8) -> Option<Self>

Checked integer addition.

pub const fn saturating_add(self, rhs: i8) -> Self

Saturating integer addition.

pub const fn checked_sub(self, rhs: i8) -> Option<Self>

Checked integer subtraction.

pub const fn saturating_sub(self, rhs: i8) -> Self

Saturating integer subtraction.

pub const fn checked_mul(self, rhs: i8) -> Option<Self>

Checked integer multiplication.

pub const fn saturating_mul(self, rhs: i8) -> Self

Saturating integer multiplication.

pub const fn checked_div(self, rhs: i8) -> Option<Self>

Checked integer division.

pub const fn checked_div_euclid(self, rhs: i8) -> Option<Self>

Checked Euclidean division.

pub const fn checked_rem(self, rhs: i8) -> Option<Self>

Checked integer remainder.

pub const fn checked_rem_euclid(self, rhs: i8) -> Option<Self>

Checked Euclidean remainder.

pub const fn checked_neg(self) -> Option<Self>

Checked negation.

pub const fn saturating_neg(self) -> Self

Saturating negation.

pub const fn checked_abs(self) -> Option<Self>

Checked absolute value.

pub const fn saturating_abs(self) -> Self

Saturating absolute value.

pub const fn checked_pow(self, rhs: u32) -> Option<Self>

Checked exponentiation.

pub const fn saturating_pow(self, rhs: u32) -> Self

Saturating exponentiation.

Trait Implementations

impl<const MIN: i8, const MAX: i8> Add<&'_ Bounded<MIN, MAX>> for i8

type Output = i8

The resulting type after applying the + operator.

fn add(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: i8, const MAX: i8> Add<&'_ Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the + operator.

fn add(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Add<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the + operator.

fn add(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the + operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Add<&'_ Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the + operator.

fn add(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: i8, const MAX: i8> Add<&'_ i8> for Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: &i8) -> Self::Output

Performs the + operation.

impl<const MIN: i8, const MAX: i8> Add<&'_ i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: &i8) -> Self::Output

Performs the + operation.

impl<const MIN: i8, const MAX: i8> Add<Bounded<MIN, MAX>> for i8

type Output = Self

The resulting type after applying the + operator.

fn add(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: i8, const MAX: i8> Add<Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the + operator.

fn add(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the + operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Add<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Self

The resulting type after applying the + operator.

fn add(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the + operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Add<Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the + operator.

fn add(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the + operation.

impl<const MIN: i8, const MAX: i8> Add<i8> for Bounded<MIN, MAX>

type Output = Self

The resulting type after applying the + operator.

fn add(self, rhs: i8) -> Self::Output

Performs the + operation.

impl<const MIN: i8, const MAX: i8> Add<i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the + operator.

fn add(self, rhs: i8) -> Self::Output

Performs the + operation.

impl<const MIN: i8, const MAX: i8> AddAssign<&'_ Bounded<MIN, MAX>> for i8

fn add_assign(&mut self, rhs: &Bounded<MIN, MAX>)

Performs the += operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> AddAssign<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn add_assign(&mut self, rhs: &Bounded<R_MIN, R_MAX>)

Performs the += operation.

impl<const MIN: i8, const MAX: i8> AddAssign<&'_ i8> for Bounded<MIN, MAX>

fn add_assign(&mut self, rhs: &i8)

Performs the += operation.

impl<const MIN: i8, const MAX: i8> AddAssign<Bounded<MIN, MAX>> for i8

fn add_assign(&mut self, rhs: Bounded<MIN, MAX>)

Performs the += operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> AddAssign<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn add_assign(&mut self, rhs: Bounded<R_MIN, R_MAX>)

Performs the += operation.

impl<const MIN: i8, const MAX: i8> AddAssign<i8> for Bounded<MIN, MAX>

fn add_assign(&mut self, rhs: i8)

Performs the += operation.

impl<const MIN: i8, const MAX: i8> AsRef<i8> for Bounded<MIN, MAX>

fn as_ref(&self) -> &i8

Performs the conversion.

impl<const MIN: i8, const MAX: i8> Binary for Bounded<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: i8, const MAX: i8> Borrow<i8> for Bounded<MIN, MAX>

fn borrow(&self) -> &i8

Immutably borrows from an owned value.

impl<const MIN: i8, const MAX: i8> Clone for Bounded<MIN, MAX>

fn clone(&self) -> Bounded<MIN, MAX>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<const MIN: i8, const MAX: i8> Debug for Bounded<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de, const MIN: i8, const MAX: i8> Deserialize<'de> for Bounded<MIN, MAX>

fn deserialize<D: Deserializer<'de>>(deserializer: D) -> Result<Self, D::Error>

Deserialize this value from the given Serde deserializer.

impl<const MIN: i8, const MAX: i8> Display for Bounded<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: i8, const MAX: i8> Div<&'_ Bounded<MIN, MAX>> for i8

type Output = i8

The resulting type after applying the / operator.

fn div(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: i8, const MAX: i8> Div<&'_ Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the / operator.

fn div(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Div<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the / operator.

fn div(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the / operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Div<&'_ Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the / operator.

fn div(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: i8, const MAX: i8> Div<&'_ i8> for Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: &i8) -> Self::Output

Performs the / operation.

impl<const MIN: i8, const MAX: i8> Div<&'_ i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: &i8) -> Self::Output

Performs the / operation.

impl<const MIN: i8, const MAX: i8> Div<Bounded<MIN, MAX>> for i8

type Output = Self

The resulting type after applying the / operator.

fn div(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: i8, const MAX: i8> Div<Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the / operator.

fn div(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the / operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Div<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Self

The resulting type after applying the / operator.

fn div(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the / operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Div<Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the / operator.

fn div(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the / operation.

impl<const MIN: i8, const MAX: i8> Div<i8> for Bounded<MIN, MAX>

type Output = Self

The resulting type after applying the / operator.

fn div(self, rhs: i8) -> Self::Output

Performs the / operation.

impl<const MIN: i8, const MAX: i8> Div<i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the / operator.

fn div(self, rhs: i8) -> Self::Output

Performs the / operation.

impl<const MIN: i8, const MAX: i8> DivAssign<&'_ Bounded<MIN, MAX>> for i8

fn div_assign(&mut self, rhs: &Bounded<MIN, MAX>)

Performs the /= operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> DivAssign<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn div_assign(&mut self, rhs: &Bounded<R_MIN, R_MAX>)

Performs the /= operation.

impl<const MIN: i8, const MAX: i8> DivAssign<&'_ i8> for Bounded<MIN, MAX>

fn div_assign(&mut self, rhs: &i8)

Performs the /= operation.

impl<const MIN: i8, const MAX: i8> DivAssign<Bounded<MIN, MAX>> for i8

fn div_assign(&mut self, rhs: Bounded<MIN, MAX>)

Performs the /= operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> DivAssign<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn div_assign(&mut self, rhs: Bounded<R_MIN, R_MAX>)

Performs the /= operation.

impl<const MIN: i8, const MAX: i8> DivAssign<i8> for Bounded<MIN, MAX>

fn div_assign(&mut self, rhs: i8)

Performs the /= operation.

impl<const MIN: i8, const MAX: i8> From<Bounded<MIN, MAX>> for i8

fn from(bounded: Bounded<MIN, MAX>) -> Self

Performs the conversion.

impl<const MIN: i8, const MAX: i8> From<Bounded<MIN, MAX>> for i16

fn from(bounded: Bounded<MIN, MAX>) -> Self

Performs the conversion.

impl<const MIN: i8, const MAX: i8> From<Bounded<MIN, MAX>> for i32

fn from(bounded: Bounded<MIN, MAX>) -> Self

Performs the conversion.

impl<const MIN: i8, const MAX: i8> From<Bounded<MIN, MAX>> for i64

fn from(bounded: Bounded<MIN, MAX>) -> Self

Performs the conversion.

impl<const MIN: i8, const MAX: i8> From<Bounded<MIN, MAX>> for i128

fn from(bounded: Bounded<MIN, MAX>) -> Self

Performs the conversion.

impl<const MIN: i8, const MAX: i8> From<Bounded<MIN, MAX>> for isize

fn from(bounded: Bounded<MIN, MAX>) -> Self

Performs the conversion.

impl<const MIN: i8, const MAX: i8> Hash for Bounded<MIN, MAX>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl<const MIN: i8, const MAX: i8> LowerExp for Bounded<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: i8, const MAX: i8> LowerHex for Bounded<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: i8, const MAX: i8> Mul<&'_ Bounded<MIN, MAX>> for i8

type Output = i8

The resulting type after applying the * operator.

fn mul(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: i8, const MAX: i8> Mul<&'_ Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the * operator.

fn mul(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Mul<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the * operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Mul<&'_ Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: i8, const MAX: i8> Mul<&'_ i8> for Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: &i8) -> Self::Output

Performs the * operation.

impl<const MIN: i8, const MAX: i8> Mul<&'_ i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: &i8) -> Self::Output

Performs the * operation.

impl<const MIN: i8, const MAX: i8> Mul<Bounded<MIN, MAX>> for i8

type Output = Self

The resulting type after applying the * operator.

fn mul(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: i8, const MAX: i8> Mul<Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the * operator.

fn mul(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the * operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Mul<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Self

The resulting type after applying the * operator.

fn mul(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the * operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Mul<Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the * operation.

impl<const MIN: i8, const MAX: i8> Mul<i8> for Bounded<MIN, MAX>

type Output = Self

The resulting type after applying the * operator.

fn mul(self, rhs: i8) -> Self::Output

Performs the * operation.

impl<const MIN: i8, const MAX: i8> Mul<i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the * operator.

fn mul(self, rhs: i8) -> Self::Output

Performs the * operation.

impl<const MIN: i8, const MAX: i8> MulAssign<&'_ Bounded<MIN, MAX>> for i8

fn mul_assign(&mut self, rhs: &Bounded<MIN, MAX>)

Performs the *= operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> MulAssign<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn mul_assign(&mut self, rhs: &Bounded<R_MIN, R_MAX>)

Performs the *= operation.

impl<const MIN: i8, const MAX: i8> MulAssign<&'_ i8> for Bounded<MIN, MAX>

fn mul_assign(&mut self, rhs: &i8)

Performs the *= operation.

impl<const MIN: i8, const MAX: i8> MulAssign<Bounded<MIN, MAX>> for i8

fn mul_assign(&mut self, rhs: Bounded<MIN, MAX>)

Performs the *= operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> MulAssign<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn mul_assign(&mut self, rhs: Bounded<R_MIN, R_MAX>)

Performs the *= operation.

impl<const MIN: i8, const MAX: i8> MulAssign<i8> for Bounded<MIN, MAX>

fn mul_assign(&mut self, rhs: i8)

Performs the *= operation.

impl<const MIN: i8, const MAX: i8> Neg for Bounded<MIN, MAX>

type Output = Self

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl<const MIN: i8, const MAX: i8> Neg for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl<const MIN: i8, const MAX: i8> Octal for Bounded<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: i8, const MAX: i8> Ord for Bounded<MIN, MAX>

fn cmp(&self, other: &Bounded<MIN, MAX>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl<const A_MIN: i8, const A_MAX: i8, const B_MIN: i8, const B_MAX: i8> PartialEq<Bounded<B_MIN, B_MAX>> for Bounded<A_MIN, A_MAX>

fn eq(&self, other: &Bounded<B_MIN, B_MAX>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<const MIN: i8, const MAX: i8> PartialEq<Bounded<MIN, MAX>> for i8

fn eq(&self, other: &Bounded<MIN, MAX>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<const MIN: i8, const MAX: i8> PartialEq<i8> for Bounded<MIN, MAX>

fn eq(&self, other: &i8) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<const A_MIN: i8, const A_MAX: i8, const B_MIN: i8, const B_MAX: i8> PartialOrd<Bounded<B_MIN, B_MAX>> for Bounded<A_MIN, A_MAX>

fn partial_cmp(&self, other: &Bounded<B_MIN, B_MAX>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const MIN: i8, const MAX: i8> PartialOrd<Bounded<MIN, MAX>> for i8

fn partial_cmp(&self, other: &Bounded<MIN, MAX>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<const MIN: i8, const MAX: i8> PartialOrd<i8> for Bounded<MIN, MAX>

fn partial_cmp(&self, other: &i8) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, const MIN: i8, const MAX: i8> Product<&'a Bounded<MIN, MAX>> for Bounded<MIN, MAX>

fn product<I: Iterator<Item = &'a Self>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a, const MIN: i8, const MAX: i8> Product<&'a Bounded<MIN, MAX>> for i8

fn product<I: Iterator<Item = &'a Bounded<MIN, MAX>>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<const MIN: i8, const MAX: i8> Product<Bounded<MIN, MAX>> for Bounded<MIN, MAX>

fn product<I: Iterator<Item = Self>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<const MIN: i8, const MAX: i8> Product<Bounded<MIN, MAX>> for i8

fn product<I: Iterator<Item = Bounded<MIN, MAX>>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<const MIN: i8, const MAX: i8> Rem<&'_ Bounded<MIN, MAX>> for i8

type Output = i8

The resulting type after applying the % operator.

fn rem(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: i8, const MAX: i8> Rem<&'_ Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the % operator.

fn rem(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Rem<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the % operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Rem<&'_ Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: i8, const MAX: i8> Rem<&'_ i8> for Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: &i8) -> Self::Output

Performs the % operation.

impl<const MIN: i8, const MAX: i8> Rem<&'_ i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: &i8) -> Self::Output

Performs the % operation.

impl<const MIN: i8, const MAX: i8> Rem<Bounded<MIN, MAX>> for i8

type Output = Self

The resulting type after applying the % operator.

fn rem(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: i8, const MAX: i8> Rem<Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the % operator.

fn rem(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the % operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Rem<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Self

The resulting type after applying the % operator.

fn rem(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the % operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Rem<Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the % operation.

impl<const MIN: i8, const MAX: i8> Rem<i8> for Bounded<MIN, MAX>

type Output = Self

The resulting type after applying the % operator.

fn rem(self, rhs: i8) -> Self::Output

Performs the % operation.

impl<const MIN: i8, const MAX: i8> Rem<i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the % operator.

fn rem(self, rhs: i8) -> Self::Output

Performs the % operation.

impl<const MIN: i8, const MAX: i8> RemAssign<&'_ Bounded<MIN, MAX>> for i8

fn rem_assign(&mut self, rhs: &Bounded<MIN, MAX>)

Performs the %= operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> RemAssign<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn rem_assign(&mut self, rhs: &Bounded<R_MIN, R_MAX>)

Performs the %= operation.

impl<const MIN: i8, const MAX: i8> RemAssign<&'_ i8> for Bounded<MIN, MAX>

fn rem_assign(&mut self, rhs: &i8)

Performs the %= operation.

impl<const MIN: i8, const MAX: i8> RemAssign<Bounded<MIN, MAX>> for i8

fn rem_assign(&mut self, rhs: Bounded<MIN, MAX>)

Performs the %= operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> RemAssign<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn rem_assign(&mut self, rhs: Bounded<R_MIN, R_MAX>)

Performs the %= operation.

impl<const MIN: i8, const MAX: i8> RemAssign<i8> for Bounded<MIN, MAX>

fn rem_assign(&mut self, rhs: i8)

Performs the %= operation.

impl<const MIN: i8, const MAX: i8> Serialize for Bounded<MIN, MAX>

fn serialize<S: Serializer>(&self, serializer: S) -> Result<S::Ok, S::Error>

Serialize this value into the given Serde serializer.

impl<const MIN: i8, const MAX: i8> Step for Bounded<MIN, MAX>

fn steps_between(start: &Self, end: &Self) -> Option<usize>

🔬 This is a nightly-only experimental API. (step_trait)

recently redesigned

Returns the number of successor steps required to get from start to end.

fn forward_checked(start: Self, count: usize) -> Option<Self>

🔬 This is a nightly-only experimental API. (step_trait)

recently redesigned

Returns the value that would be obtained by taking the successor of self count times.

fn backward_checked(start: Self, count: usize) -> Option<Self>

🔬 This is a nightly-only experimental API. (step_trait)

recently redesigned

Returns the value that would be obtained by taking the predecessor of self count times.

fn forward(start: Self, count: usize) -> Self

🔬 This is a nightly-only experimental API. (step_trait)

recently redesigned

Returns the value that would be obtained by taking the successor of self count times.

unsafe fn forward_unchecked(start: Self, count: usize) -> Self

🔬 This is a nightly-only experimental API. (step_trait)

recently redesigned

Returns the value that would be obtained by taking the successor of self count times.

fn backward(start: Self, count: usize) -> Self

🔬 This is a nightly-only experimental API. (step_trait)

recently redesigned

Returns the value that would be obtained by taking the predecessor of self count times.

unsafe fn backward_unchecked(start: Self, count: usize) -> Self

🔬 This is a nightly-only experimental API. (step_trait)

recently redesigned

Returns the value that would be obtained by taking the predecessor of self count times.

impl<const MIN: i8, const MAX: i8> Sub<&'_ Bounded<MIN, MAX>> for i8

type Output = i8

The resulting type after applying the - operator.

fn sub(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: i8, const MAX: i8> Sub<&'_ Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the - operator.

fn sub(self, rhs: &Bounded<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Sub<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the - operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Sub<&'_ Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: &Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: i8, const MAX: i8> Sub<&'_ i8> for Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: &i8) -> Self::Output

Performs the - operation.

impl<const MIN: i8, const MAX: i8> Sub<&'_ i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: &i8) -> Self::Output

Performs the - operation.

impl<const MIN: i8, const MAX: i8> Sub<Bounded<MIN, MAX>> for i8

type Output = Self

The resulting type after applying the - operator.

fn sub(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: i8, const MAX: i8> Sub<Bounded<MIN, MAX>> for &i8

type Output = i8

The resulting type after applying the - operator.

fn sub(self, rhs: Bounded<MIN, MAX>) -> Self::Output

Performs the - operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Sub<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

type Output = Self

The resulting type after applying the - operator.

fn sub(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the - operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> Sub<Bounded<R_MIN, R_MAX>> for &Bounded<L_MIN, L_MAX>

type Output = Bounded<L_MIN, L_MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: Bounded<R_MIN, R_MAX>) -> Self::Output

Performs the - operation.

impl<const MIN: i8, const MAX: i8> Sub<i8> for Bounded<MIN, MAX>

type Output = Self

The resulting type after applying the - operator.

fn sub(self, rhs: i8) -> Self::Output

Performs the - operation.

impl<const MIN: i8, const MAX: i8> Sub<i8> for &Bounded<MIN, MAX>

type Output = Bounded<MIN, MAX>

The resulting type after applying the - operator.

fn sub(self, rhs: i8) -> Self::Output

Performs the - operation.

impl<const MIN: i8, const MAX: i8> SubAssign<&'_ Bounded<MIN, MAX>> for i8

fn sub_assign(&mut self, rhs: &Bounded<MIN, MAX>)

Performs the -= operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> SubAssign<&'_ Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn sub_assign(&mut self, rhs: &Bounded<R_MIN, R_MAX>)

Performs the -= operation.

impl<const MIN: i8, const MAX: i8> SubAssign<&'_ i8> for Bounded<MIN, MAX>

fn sub_assign(&mut self, rhs: &i8)

Performs the -= operation.

impl<const MIN: i8, const MAX: i8> SubAssign<Bounded<MIN, MAX>> for i8

fn sub_assign(&mut self, rhs: Bounded<MIN, MAX>)

Performs the -= operation.

impl<const L_MIN: i8, const L_MAX: i8, const R_MIN: i8, const R_MAX: i8> SubAssign<Bounded<R_MIN, R_MAX>> for Bounded<L_MIN, L_MAX>

fn sub_assign(&mut self, rhs: Bounded<R_MIN, R_MAX>)

Performs the -= operation.

impl<const MIN: i8, const MAX: i8> SubAssign<i8> for Bounded<MIN, MAX>

fn sub_assign(&mut self, rhs: i8)

Performs the -= operation.

impl<'a, const MIN: i8, const MAX: i8> Sum<&'a Bounded<MIN, MAX>> for Bounded<MIN, MAX>

fn sum<I: Iterator<Item = &'a Self>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<'a, const MIN: i8, const MAX: i8> Sum<&'a Bounded<MIN, MAX>> for i8

fn sum<I: Iterator<Item = &'a Bounded<MIN, MAX>>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<const MIN: i8, const MAX: i8> Sum<Bounded<MIN, MAX>> for Bounded<MIN, MAX>

fn sum<I: Iterator<Item = Self>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<const MIN: i8, const MAX: i8> Sum<Bounded<MIN, MAX>> for i8

fn sum<I: Iterator<Item = Bounded<MIN, MAX>>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by “summing up” the items.

impl<const MIN: i8, const MAX: i8> UpperExp for Bounded<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: i8, const MAX: i8> UpperHex for Bounded<MIN, MAX>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<const MIN: i8, const MAX: i8> Copy for Bounded<MIN, MAX>

impl<const MIN: i8, const MAX: i8> Eq for Bounded<MIN, MAX>

impl<const MIN: i8, const MAX: i8> StructuralEq for Bounded<MIN, MAX>