Struct bgfx_rs::static_lib::PciIdFlags
source · [−]pub struct PciIdFlags { /* private fields */ }
Implementations
sourceimpl PciIdFlags
impl PciIdFlags
sourcepub const SOFTWARE_RASTERIZER: Self = Self{bits: bgfx_sys::BGFX_PCI_ID_SOFTWARE_RASTERIZER as _,}
pub const SOFTWARE_RASTERIZER: Self = Self{bits: bgfx_sys::BGFX_PCI_ID_SOFTWARE_RASTERIZER as _,}
Software rasterizer.
sourcepub const fn from_bits(bits: u16) -> Option<Self>
pub const fn from_bits(bits: u16) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u16) -> Self
pub const fn from_bits_truncate(bits: u16) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u16) -> Self
pub const unsafe fn from_bits_unchecked(bits: u16) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
sourceimpl Binary for PciIdFlags
impl Binary for PciIdFlags
sourceimpl BitAnd<PciIdFlags> for PciIdFlags
impl BitAnd<PciIdFlags> for PciIdFlags
type Output = PciIdFlags
type Output = PciIdFlags
The resulting type after applying the &
operator.
sourceimpl BitAndAssign<PciIdFlags> for PciIdFlags
impl BitAndAssign<PciIdFlags> for PciIdFlags
sourcefn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
sourceimpl BitOr<PciIdFlags> for PciIdFlags
impl BitOr<PciIdFlags> for PciIdFlags
sourcefn bitor(self, other: PciIdFlags) -> Self
fn bitor(self, other: PciIdFlags) -> Self
Returns the union of the two sets of flags.
type Output = PciIdFlags
type Output = PciIdFlags
The resulting type after applying the |
operator.
sourceimpl BitOrAssign<PciIdFlags> for PciIdFlags
impl BitOrAssign<PciIdFlags> for PciIdFlags
sourcefn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
sourceimpl BitXor<PciIdFlags> for PciIdFlags
impl BitXor<PciIdFlags> for PciIdFlags
sourcefn bitxor(self, other: Self) -> Self
fn bitxor(self, other: Self) -> Self
Returns the left flags, but with all the right flags toggled.
type Output = PciIdFlags
type Output = PciIdFlags
The resulting type after applying the ^
operator.
sourceimpl BitXorAssign<PciIdFlags> for PciIdFlags
impl BitXorAssign<PciIdFlags> for PciIdFlags
sourcefn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
sourceimpl Clone for PciIdFlags
impl Clone for PciIdFlags
sourcefn clone(&self) -> PciIdFlags
fn clone(&self) -> PciIdFlags
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for PciIdFlags
impl Debug for PciIdFlags
sourceimpl Extend<PciIdFlags> for PciIdFlags
impl Extend<PciIdFlags> for PciIdFlags
sourcefn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
sourcefn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Extends a collection with exactly one element.
sourcefn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
sourceimpl FromIterator<PciIdFlags> for PciIdFlags
impl FromIterator<PciIdFlags> for PciIdFlags
sourcefn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
Creates a value from an iterator. Read more
sourceimpl Hash for PciIdFlags
impl Hash for PciIdFlags
sourceimpl LowerHex for PciIdFlags
impl LowerHex for PciIdFlags
sourceimpl Not for PciIdFlags
impl Not for PciIdFlags
type Output = PciIdFlags
type Output = PciIdFlags
The resulting type after applying the !
operator.
sourceimpl Octal for PciIdFlags
impl Octal for PciIdFlags
sourceimpl Ord for PciIdFlags
impl Ord for PciIdFlags
sourceimpl PartialEq<PciIdFlags> for PciIdFlags
impl PartialEq<PciIdFlags> for PciIdFlags
sourcefn eq(&self, other: &PciIdFlags) -> bool
fn eq(&self, other: &PciIdFlags) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &PciIdFlags) -> bool
fn ne(&self, other: &PciIdFlags) -> bool
This method tests for !=
.
sourceimpl PartialOrd<PciIdFlags> for PciIdFlags
impl PartialOrd<PciIdFlags> for PciIdFlags
sourcefn partial_cmp(&self, other: &PciIdFlags) -> Option<Ordering>
fn partial_cmp(&self, other: &PciIdFlags) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
sourceimpl Sub<PciIdFlags> for PciIdFlags
impl Sub<PciIdFlags> for PciIdFlags
type Output = PciIdFlags
type Output = PciIdFlags
The resulting type after applying the -
operator.
sourceimpl SubAssign<PciIdFlags> for PciIdFlags
impl SubAssign<PciIdFlags> for PciIdFlags
sourcefn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.
sourceimpl UpperHex for PciIdFlags
impl UpperHex for PciIdFlags
impl Copy for PciIdFlags
impl Eq for PciIdFlags
impl StructuralEq for PciIdFlags
impl StructuralPartialEq for PciIdFlags
Auto Trait Implementations
impl RefUnwindSafe for PciIdFlags
impl Send for PciIdFlags
impl Sync for PciIdFlags
impl Unpin for PciIdFlags
impl UnwindSafe for PciIdFlags
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more