pub struct Res<'w, T>{ /* private fields */ }Expand description
Shared borrow of a Resource.
See the Resource documentation for usage.
If you need a unique mutable borrow, use ResMut instead.
This SystemParam fails validation if resource doesn’t exist.
This will cause a panic, but can be configured to do nothing or warn once.
Use Option<Res<T>> instead if the resource might not always exist.
Implementations§
Source§impl<'w, T> Res<'w, T>where
T: Resource,
impl<'w, T> Res<'w, T>where
T: Resource,
Sourcepub fn clone(this: &Res<'w, T>) -> Res<'w, T>
pub fn clone(this: &Res<'w, T>) -> Res<'w, T>
Copies a reference to a resource.
Note that unless you actually need an instance of Res<T>, you should
prefer to just convert it to &T which can be freely copied.
Sourcepub fn into_inner(self) -> &'w T
pub fn into_inner(self) -> &'w T
Due to lifetime limitations of the Deref trait, this method can be used to obtain a
reference of the Resource with a lifetime bound to 'w instead of the lifetime of the
struct itself.
Trait Implementations§
Source§impl<'w, T> DetectChanges for Res<'w, T>
impl<'w, T> DetectChanges for Res<'w, T>
Source§fn is_changed(&self) -> bool
fn is_changed(&self) -> bool
Returns
true if this value was added or mutably dereferenced
either since the last time the system ran or, if the system never ran,
since the beginning of the program. Read moreSource§fn last_changed(&self) -> Tick
fn last_changed(&self) -> Tick
Returns the change tick recording the time this data was most recently changed. Read more
Source§fn changed_by(&self) -> MaybeLocation
fn changed_by(&self) -> MaybeLocation
The location that last caused this to change.
Source§impl<'w, 'a, T> IntoIterator for &'a Res<'w, T>
impl<'w, 'a, T> IntoIterator for &'a Res<'w, T>
Source§impl<'a, T> SystemParam for Res<'a, T>where
T: Resource,
impl<'a, T> SystemParam for Res<'a, T>where
T: Resource,
Source§type State = ComponentId
type State = ComponentId
Used to store data which persists across invocations of a system.
Source§type Item<'w, 's> = Res<'w, T>
type Item<'w, 's> = Res<'w, T>
The item type returned when constructing this system param.
The value of this associated type should be
Self, instantiated with new lifetimes. Read moreSource§fn init_state(
world: &mut World,
system_meta: &mut SystemMeta,
) -> <Res<'a, T> as SystemParam>::State
fn init_state( world: &mut World, system_meta: &mut SystemMeta, ) -> <Res<'a, T> as SystemParam>::State
Registers any
World access used by this SystemParam
and creates a new instance of this param’s State.Source§unsafe fn validate_param(
_: &<Res<'a, T> as SystemParam>::State,
_system_meta: &SystemMeta,
world: UnsafeWorldCell<'_>,
) -> Result<(), SystemParamValidationError>
unsafe fn validate_param( _: &<Res<'a, T> as SystemParam>::State, _system_meta: &SystemMeta, world: UnsafeWorldCell<'_>, ) -> Result<(), SystemParamValidationError>
Source§unsafe fn get_param<'w, 's>(
_: &'s mut <Res<'a, T> as SystemParam>::State,
system_meta: &SystemMeta,
world: UnsafeWorldCell<'w>,
change_tick: Tick,
) -> <Res<'a, T> as SystemParam>::Item<'w, 's>
unsafe fn get_param<'w, 's>( _: &'s mut <Res<'a, T> as SystemParam>::State, system_meta: &SystemMeta, world: UnsafeWorldCell<'w>, change_tick: Tick, ) -> <Res<'a, T> as SystemParam>::Item<'w, 's>
Creates a parameter to be passed into a
SystemParamFunction. Read moreSource§unsafe fn new_archetype(
state: &mut Self::State,
archetype: &Archetype,
system_meta: &mut SystemMeta,
)
unsafe fn new_archetype( state: &mut Self::State, archetype: &Archetype, system_meta: &mut SystemMeta, )
For the specified
Archetype, registers the components accessed by this SystemParam (if applicable).a Read moreSource§fn apply(state: &mut Self::State, system_meta: &SystemMeta, world: &mut World)
fn apply(state: &mut Self::State, system_meta: &SystemMeta, world: &mut World)
Applies any deferred mutations stored in this
SystemParam’s state.
This is used to apply Commands during ApplyDeferred.Source§fn queue(
state: &mut Self::State,
system_meta: &SystemMeta,
world: DeferredWorld<'_>,
)
fn queue( state: &mut Self::State, system_meta: &SystemMeta, world: DeferredWorld<'_>, )
Queues any deferred mutations to be applied at the next
ApplyDeferred.impl<'a, T> ReadOnlySystemParam for Res<'a, T>where
T: Resource,
Auto Trait Implementations§
impl<'w, T> Freeze for Res<'w, T>where
T: ?Sized,
impl<'w, T> RefUnwindSafe for Res<'w, T>where
T: RefUnwindSafe + ?Sized,
impl<'w, T> Send for Res<'w, T>where
T: ?Sized,
impl<'w, T> Sync for Res<'w, T>where
T: ?Sized,
impl<'w, T> Unpin for Res<'w, T>where
T: ?Sized,
impl<'w, T> UnwindSafe for Res<'w, T>where
T: RefUnwindSafe + ?Sized,
Blanket Implementations§
Source§impl<T, U> AsBindGroupShaderType<U> for T
impl<T, U> AsBindGroupShaderType<U> for T
Source§fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U
fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U
Return the
T ShaderType for self. When used in AsBindGroup
derives, it is safe to assume that all images in self exist.Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
Source§impl<T, C, D> Curve<T> for D
impl<T, C, D> Curve<T> for D
Source§fn sample_unchecked(&self, t: f32) -> T
fn sample_unchecked(&self, t: f32) -> T
Sample a point on this curve at the parameter value
t, extracting the associated value.
This is the unchecked version of sampling, which should only be used if the sample time t
is already known to lie within the curve’s domain. Read moreSource§fn sample(&self, t: f32) -> Option<T>
fn sample(&self, t: f32) -> Option<T>
Sample a point on this curve at the parameter value
t, returning None if the point is
outside of the curve’s domain.Source§fn sample_clamped(&self, t: f32) -> T
fn sample_clamped(&self, t: f32) -> T
Sample a point on this curve at the parameter value
t, clamping t to lie inside the
domain of the curve.Source§impl<C, T> CurveExt<T> for Cwhere
C: Curve<T>,
impl<C, T> CurveExt<T> for Cwhere
C: Curve<T>,
Source§fn sample_iter(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = Option<T>>
fn sample_iter( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = Option<T>>
Sample a collection of
n >= 0 points on this curve at the parameter values t_n,
returning None if the point is outside of the curve’s domain. Read moreSource§fn sample_iter_unchecked(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>
fn sample_iter_unchecked( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = T>
Sample a collection of
n >= 0 points on this curve at the parameter values t_n,
extracting the associated values. This is the unchecked version of sampling, which should
only be used if the sample times t_n are already known to lie within the curve’s domain. Read moreSource§fn sample_iter_clamped(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>
fn sample_iter_clamped( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = T>
Sample a collection of
n >= 0 points on this curve at the parameter values t_n,
clamping t_n to lie inside the domain of the curve. Read moreSource§fn map<S, F>(self, f: F) -> MapCurve<T, S, Self, F>where
F: Fn(T) -> S,
fn map<S, F>(self, f: F) -> MapCurve<T, S, Self, F>where
F: Fn(T) -> S,
Create a new curve by mapping the values of this curve via a function
f; i.e., if the
sample at time t for this curve is x, the value at time t on the new curve will be
f(x).Source§fn reparametrize<F>(self, domain: Interval, f: F) -> ReparamCurve<T, Self, F>
fn reparametrize<F>(self, domain: Interval, f: F) -> ReparamCurve<T, Self, F>
Create a new
Curve whose parameter space is related to the parameter space of this curve
by f. For each time t, the sample from the new curve at time t is the sample from
this curve at time f(t). The given domain will be the domain of the new curve. The
function f is expected to take domain into self.domain(). Read moreSource§fn reparametrize_linear(
self,
domain: Interval,
) -> Result<LinearReparamCurve<T, Self>, LinearReparamError>
fn reparametrize_linear( self, domain: Interval, ) -> Result<LinearReparamCurve<T, Self>, LinearReparamError>
Source§fn reparametrize_by_curve<C>(self, other: C) -> CurveReparamCurve<T, Self, C>
fn reparametrize_by_curve<C>(self, other: C) -> CurveReparamCurve<T, Self, C>
Source§fn graph(self) -> GraphCurve<T, Self>
fn graph(self) -> GraphCurve<T, Self>
Source§fn zip<S, C>(
self,
other: C,
) -> Result<ZipCurve<T, S, Self, C>, InvalidIntervalError>where
C: Curve<S>,
fn zip<S, C>(
self,
other: C,
) -> Result<ZipCurve<T, S, Self, C>, InvalidIntervalError>where
C: Curve<S>,
Source§fn chain<C>(self, other: C) -> Result<ChainCurve<T, Self, C>, ChainError>where
C: Curve<T>,
fn chain<C>(self, other: C) -> Result<ChainCurve<T, Self, C>, ChainError>where
C: Curve<T>,
Source§fn reverse(self) -> Result<ReverseCurve<T, Self>, ReverseError>
fn reverse(self) -> Result<ReverseCurve<T, Self>, ReverseError>
Source§fn repeat(self, count: usize) -> Result<RepeatCurve<T, Self>, RepeatError>
fn repeat(self, count: usize) -> Result<RepeatCurve<T, Self>, RepeatError>
Source§fn forever(self) -> Result<ForeverCurve<T, Self>, RepeatError>
fn forever(self) -> Result<ForeverCurve<T, Self>, RepeatError>
Source§fn ping_pong(self) -> Result<PingPongCurve<T, Self>, PingPongError>
fn ping_pong(self) -> Result<PingPongCurve<T, Self>, PingPongError>
Source§fn chain_continue<C>(
self,
other: C,
) -> Result<ContinuationCurve<T, Self, C>, ChainError>where
T: VectorSpace,
C: Curve<T>,
fn chain_continue<C>(
self,
other: C,
) -> Result<ContinuationCurve<T, Self, C>, ChainError>where
T: VectorSpace,
C: Curve<T>,
Source§fn samples(
&self,
samples: usize,
) -> Result<impl Iterator<Item = T>, ResamplingError>
fn samples( &self, samples: usize, ) -> Result<impl Iterator<Item = T>, ResamplingError>
Extract an iterator over evenly-spaced samples from this curve. Read more
Source§impl<C, T> CurveResampleExt<T> for C
impl<C, T> CurveResampleExt<T> for C
Source§fn resample<I>(
&self,
segments: usize,
interpolation: I,
) -> Result<SampleCurve<T, I>, ResamplingError>
fn resample<I>( &self, segments: usize, interpolation: I, ) -> Result<SampleCurve<T, I>, ResamplingError>
Resample this
Curve to produce a new one that is defined by interpolation over equally
spaced sample values, using the provided interpolation to interpolate between adjacent samples.
The curve is interpolated on segments segments between samples. For example, if segments is 1,
only the start and end points of the curve are used as samples; if segments is 2, a sample at
the midpoint is taken as well, and so on. Read moreSource§fn resample_auto(
&self,
segments: usize,
) -> Result<SampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
fn resample_auto(
&self,
segments: usize,
) -> Result<SampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
Resample this
Curve to produce a new one that is defined by interpolation over equally
spaced sample values, using automatic interpolation to interpolate between adjacent samples.
The curve is interpolated on segments segments between samples. For example, if segments is 1,
only the start and end points of the curve are used as samples; if segments is 2, a sample at
the midpoint is taken as well, and so on. Read moreSource§fn resample_uneven<I>(
&self,
sample_times: impl IntoIterator<Item = f32>,
interpolation: I,
) -> Result<UnevenSampleCurve<T, I>, ResamplingError>
fn resample_uneven<I>( &self, sample_times: impl IntoIterator<Item = f32>, interpolation: I, ) -> Result<UnevenSampleCurve<T, I>, ResamplingError>
Source§fn resample_uneven_auto(
&self,
sample_times: impl IntoIterator<Item = f32>,
) -> Result<UnevenSampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
fn resample_uneven_auto(
&self,
sample_times: impl IntoIterator<Item = f32>,
) -> Result<UnevenSampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
Resample this
Curve to produce a new one that is defined by automatic interpolation over
samples taken at the given set of times. The given sample_times are expected to contain at least
two valid times within the curve’s domain interval. Read moreSource§impl<T, C> CurveWithDerivative<T> for Cwhere
T: HasTangent,
C: SampleDerivative<T>,
impl<T, C> CurveWithDerivative<T> for Cwhere
T: HasTangent,
C: SampleDerivative<T>,
Source§fn with_derivative(self) -> SampleDerivativeWrapper<C>
fn with_derivative(self) -> SampleDerivativeWrapper<C>
This curve, but with its first derivative included in sampling. Read more
Source§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
Source§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Converts
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>, which can then be
downcast into Box<dyn ConcreteType> where ConcreteType implements Trait.Source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Converts
Rc<Trait> (where Trait: Downcast) to Rc<Any>, which can then be further
downcast into Rc<ConcreteType> where ConcreteType implements Trait.Source§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Converts
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.Source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Converts
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.Source§impl<T> DowncastSend for T
impl<T> DowncastSend for T
Source§impl<S> FromSample<S> for S
impl<S> FromSample<S> for S
fn from_sample_(s: S) -> S
Source§impl<T, W> HasTypeWitness<W> for Twhere
W: MakeTypeWitness<Arg = T>,
T: ?Sized,
impl<T, W> HasTypeWitness<W> for Twhere
W: MakeTypeWitness<Arg = T>,
T: ?Sized,
Source§impl<T> Identity for Twhere
T: ?Sized,
impl<T> Identity for Twhere
T: ?Sized,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T, C, D> SampleDerivative<T> for D
impl<T, C, D> SampleDerivative<T> for D
Source§fn sample_with_derivative_unchecked(&self, t: f32) -> WithDerivative<T>
fn sample_with_derivative_unchecked(&self, t: f32) -> WithDerivative<T>
Sample this curve at the parameter value
t, extracting the associated value
in addition to its derivative. This is the unchecked version of sampling, which
should only be used if the sample time t is already known to lie within the
curve’s domain. Read moreSource§fn sample_with_derivative(&self, t: f32) -> Option<WithDerivative<T>>
fn sample_with_derivative(&self, t: f32) -> Option<WithDerivative<T>>
Sample this curve’s value and derivative at the parameter value
t, returning
None if the point is outside of the curve’s domain.Source§fn sample_with_derivative_clamped(&self, t: f32) -> WithDerivative<T>
fn sample_with_derivative_clamped(&self, t: f32) -> WithDerivative<T>
Sample this curve’s value and derivative at the parameter value
t, clamping t
to lie inside the domain of the curve.