pub struct Ref<'a, T> { /* private fields */ }
Expand description
Returns a reference to the inner value.
Outstanding borrows hold a read lock on the inner value. This means that
long-lived borrows could cause the producer half to block. It is recommended
to keep the borrow as short-lived as possible. Additionally, if you are
running in an environment that allows !Send
futures, you must ensure that
the returned Ref
type is never held alive across an .await
point,
otherwise, it can lead to a deadlock.
The priority policy of the lock is dependent on the underlying lock
implementation, and this type does not guarantee that any particular policy
will be used. In particular, a producer which is waiting to acquire the lock
in send
might or might not block concurrent calls to borrow
, e.g.:
Potential deadlock example
// Task 1 (on thread A) | // Task 2 (on thread B)
let _ref1 = rx.borrow(); |
| // will block
| let _ = tx.send(());
// may deadlock |
let _ref2 = rx.borrow(); |
Implementations§
Source§impl<'a, T> Ref<'a, T>
impl<'a, T> Ref<'a, T>
Sourcepub fn has_changed(&self) -> bool
pub fn has_changed(&self) -> bool
Indicates if the borrowed value is considered as changed since the last time it has been marked as seen.
Unlike Receiver::has_changed()
, this method does not fail if the channel is closed.
When borrowed from the Sender
this function will always return false
.
§Examples
use tokio::sync::watch;
#[tokio::main]
async fn main() {
let (tx, mut rx) = watch::channel("hello");
tx.send("goodbye").unwrap();
// The sender does never consider the value as changed.
assert!(!tx.borrow().has_changed());
// Drop the sender immediately, just for testing purposes.
drop(tx);
// Even if the sender has already been dropped...
assert!(rx.has_changed().is_err());
// ...the modified value is still readable and detected as changed.
assert_eq!(*rx.borrow(), "goodbye");
assert!(rx.borrow().has_changed());
// Read the changed value and mark it as seen.
{
let received = rx.borrow_and_update();
assert_eq!(*received, "goodbye");
assert!(received.has_changed());
// Release the read lock when leaving this scope.
}
// Now the value has already been marked as seen and could
// never be modified again (after the sender has been dropped).
assert!(!rx.borrow().has_changed());
}
Trait Implementations§
Auto Trait Implementations§
impl<'a, T> Freeze for Ref<'a, T>
impl<'a, T> !RefUnwindSafe for Ref<'a, T>
impl<'a, T> !Send for Ref<'a, T>
impl<'a, T> Sync for Ref<'a, T>where
T: Sync,
impl<'a, T> Unpin for Ref<'a, T>
impl<'a, T> !UnwindSafe for Ref<'a, T>
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§fn in_current_span(self) -> Instrumented<Self> ⓘ
fn in_current_span(self) -> Instrumented<Self> ⓘ
Source§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);