pub struct Notified<'a> { /* private fields */ }
Expand description
Future returned from Notify::notified()
.
This future is fused, so once it has completed, any future calls to poll
will immediately return Poll::Ready
.
Implementations§
Source§impl Notified<'_>
impl Notified<'_>
Sourcepub fn enable(self: Pin<&mut Notified<'_>>) -> bool
pub fn enable(self: Pin<&mut Notified<'_>>) -> bool
Adds this future to the list of futures that are ready to receive
wakeups from calls to notify_one
.
Polling the future also adds it to the list, so this method should only
be used if you want to add the future to the list before the first call
to poll
. (In fact, this method is equivalent to calling poll
except
that no Waker
is registered.)
This has no effect on notifications sent using notify_waiters
, which
are received as long as they happen after the creation of the Notified
regardless of whether enable
or poll
has been called.
This method returns true if the Notified
is ready. This happens in the
following situations:
- The
notify_waiters
method was called between the creation of theNotified
and the call to this method. - This is the first call to
enable
orpoll
on this future, and theNotify
was holding a permit from a previous call tonotify_one
. The call consumes the permit in that case. - The future has previously been enabled or polled, and it has since
then been marked ready by either consuming a permit from the
Notify
, or by a call tonotify_one
ornotify_waiters
that removed it from the list of futures ready to receive wakeups.
If this method returns true, any future calls to poll on the same future
will immediately return Poll::Ready
.
§Examples
Unbound multi-producer multi-consumer (mpmc) channel.
The call to enable
is important because otherwise if you have two
calls to recv
and two calls to send
in parallel, the following could
happen:
- Both calls to
try_recv
returnNone
. - Both new elements are added to the vector.
- The
notify_one
method is called twice, adding only a single permit to theNotify
. - Both calls to
recv
reach theNotified
future. One of them consumes the permit, and the other sleeps forever.
By adding the Notified
futures to the list by calling enable
before
try_recv
, the notify_one
calls in step three would remove the
futures from the list and mark them notified instead of adding a permit
to the Notify
. This ensures that both futures are woken.
use tokio::sync::Notify;
use std::collections::VecDeque;
use std::sync::Mutex;
struct Channel<T> {
messages: Mutex<VecDeque<T>>,
notify_on_sent: Notify,
}
impl<T> Channel<T> {
pub fn send(&self, msg: T) {
let mut locked_queue = self.messages.lock().unwrap();
locked_queue.push_back(msg);
drop(locked_queue);
// Send a notification to one of the calls currently
// waiting in a call to `recv`.
self.notify_on_sent.notify_one();
}
pub fn try_recv(&self) -> Option<T> {
let mut locked_queue = self.messages.lock().unwrap();
locked_queue.pop_front()
}
pub async fn recv(&self) -> T {
let future = self.notify_on_sent.notified();
tokio::pin!(future);
loop {
// Make sure that no wakeup is lost if we get
// `None` from `try_recv`.
future.as_mut().enable();
if let Some(msg) = self.try_recv() {
return msg;
}
// Wait for a call to `notify_one`.
//
// This uses `.as_mut()` to avoid consuming the future,
// which lets us call `Pin::set` below.
future.as_mut().await;
// Reset the future in case another call to
// `try_recv` got the message before us.
future.set(self.notify_on_sent.notified());
}
}
}
Trait Implementations§
impl<'a> Send for Notified<'a>
impl<'a> Sync for Notified<'a>
Auto Trait Implementations§
impl<'a> !Freeze for Notified<'a>
impl<'a> !RefUnwindSafe for Notified<'a>
impl<'a> !Unpin for Notified<'a>
impl<'a> !UnwindSafe for Notified<'a>
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> FutureExt for T
impl<T> FutureExt for T
Source§fn map<U, F>(self, f: F) -> Map<Self, F> ⓘ
fn map<U, F>(self, f: F) -> Map<Self, F> ⓘ
Source§fn map_into<U>(self) -> MapInto<Self, U> ⓘ
fn map_into<U>(self) -> MapInto<Self, U> ⓘ
Source§fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F> ⓘ
fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F> ⓘ
f
. Read moreSource§fn left_future<B>(self) -> Either<Self, B> ⓘ
fn left_future<B>(self) -> Either<Self, B> ⓘ
Source§fn right_future<A>(self) -> Either<A, Self> ⓘ
fn right_future<A>(self) -> Either<A, Self> ⓘ
Source§fn into_stream(self) -> IntoStream<Self>where
Self: Sized,
fn into_stream(self) -> IntoStream<Self>where
Self: Sized,
Source§fn flatten(self) -> Flatten<Self> ⓘ
fn flatten(self) -> Flatten<Self> ⓘ
Source§fn flatten_stream(self) -> FlattenStream<Self>
fn flatten_stream(self) -> FlattenStream<Self>
Source§fn fuse(self) -> Fuse<Self> ⓘwhere
Self: Sized,
fn fuse(self) -> Fuse<Self> ⓘwhere
Self: Sized,
poll
will never again be called once it has
completed. This method can be used to turn any Future
into a
FusedFuture
. Read moreSource§fn inspect<F>(self, f: F) -> Inspect<Self, F> ⓘ
fn inspect<F>(self, f: F) -> Inspect<Self, F> ⓘ
Source§fn catch_unwind(self) -> CatchUnwind<Self> ⓘwhere
Self: Sized + UnwindSafe,
fn catch_unwind(self) -> CatchUnwind<Self> ⓘwhere
Self: Sized + UnwindSafe,
Source§fn remote_handle(self) -> (Remote<Self>, RemoteHandle<Self::Output>)where
Self: Sized,
fn remote_handle(self) -> (Remote<Self>, RemoteHandle<Self::Output>)where
Self: Sized,
()
on completion and sends
its output to another future on a separate task. Read moreSource§fn boxed<'a>(self) -> Pin<Box<dyn Future<Output = Self::Output> + Send + 'a>>
fn boxed<'a>(self) -> Pin<Box<dyn Future<Output = Self::Output> + Send + 'a>>
Source§fn boxed_local<'a>(self) -> Pin<Box<dyn Future<Output = Self::Output> + 'a>>where
Self: Sized + 'a,
fn boxed_local<'a>(self) -> Pin<Box<dyn Future<Output = Self::Output> + 'a>>where
Self: Sized + 'a,
Source§fn unit_error(self) -> UnitError<Self> ⓘwhere
Self: Sized,
fn unit_error(self) -> UnitError<Self> ⓘwhere
Self: Sized,
Future<Output = T>
into a
TryFuture<Ok = T, Error = ()
>.Source§fn never_error(self) -> NeverError<Self> ⓘwhere
Self: Sized,
fn never_error(self) -> NeverError<Self> ⓘwhere
Self: Sized,
Future<Output = T>
into a
TryFuture<Ok = T, Error = Never
>.Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§fn in_current_span(self) -> Instrumented<Self> ⓘ
fn in_current_span(self) -> Instrumented<Self> ⓘ
Source§impl<F> IntoFuture for Fwhere
F: Future,
impl<F> IntoFuture for Fwhere
F: Future,
Source§type IntoFuture = F
type IntoFuture = F
Source§fn into_future(self) -> <F as IntoFuture>::IntoFuture
fn into_future(self) -> <F as IntoFuture>::IntoFuture
Source§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);