Struct TrendLogMultipleObject 

pub struct TrendLogMultipleObject { /* private fields */ }

BACnet TrendLogMultiple object (type 27).

Multi-channel trending. Unlike TrendLog, which monitors a single property, TrendLogMultiple monitors a list of device-object-property references and logs one value per reference in each record. The database’s trend poller samples every reference every Log_Interval while Logging_Type is POLLED, at clock-aligned times when Align_Intervals asks for them, and once for each Trigger while it is TRIGGERED. Records are kept only while Enable is TRUE and the local time lies between Start_Time and Stop_Time.

Implementations

impl TrendLogMultipleObject

pub fn new( instance: u32, name: impl Into<String>, buffer_size: u32, ) -> Result<Self, Error>

Build a log with logging enabled that holds at most buffer_size records.

pub fn add_record( &mut self, record: BACnetLogMultipleRecord, ) -> Result<(), Error>

Add a record to the log buffer.

Success does not guarantee a resident ordinary record: disabled logging and a record outside the Start_Time / Stop_Time window are ignored, zero-capacity logging may only count, and a stop-before-full transition records status instead. Missing/invalid status clocks fail atomically with DEVICE / OPERATIONAL_PROBLEM. A successful call serves a pending Trigger, which reads FALSE again, even when the record is ignored (Enable FALSE, or outside the window): the acquisition was made.

pub fn add_property_reference( &mut self, reference: BACnetDeviceObjectPropertyReference, ) -> Result<(), Error>

Append a reference to Log_DeviceObjectProperty as local configuration: the log buffer is left as it is.

A reference may name another device; the poller then logs a failure in its slot of each record instead of reading it. A Device member that isn’t a Device identifier fails with PROPERTY / VALUE_OUT_OF_RANGE, and a reference past MAX_LOG_DEVICE_OBJECT_PROPERTIES with RESOURCES / NO_SPACE_TO_WRITE_PROPERTY; either leaves the array unchanged.

pub fn records(&self) -> &VecDeque<BACnetLogMultipleRecord>

Get the current buffer contents.

pub fn total_record_count(&self) -> u32

Total_Record_Count, as TrendLogObject::total_record_count serves it.

pub fn restore_log_buffer( &mut self, total_record_count: u32, records: impl IntoIterator<Item = BACnetLogMultipleRecord>, ) -> Result<(), Error>

Restore the log buffer, or seed Total_Record_Count with no records, before the log is added to an ObjectDatabase, under the rules of TrendLogObject::restore_log_buffer (#1537). Records aren’t checked against Log_DeviceObjectProperty, which may have changed since they were taken. After a restart, follow it with record_interruption, which counts toward Total_Record_Count.

pub fn record_interruption( &mut self, date: Date, time: Time, ) -> Result<(), Error>

Append a LOG_INTERRUPTED status record, as TrendLogObject::record_interruption does, after restoring the log on a restart (#1537).

pub fn clear(&mut self)

Clear the buffer.

pub fn set_description(&mut self, desc: impl Into<String>)

Set the description string.

pub fn set_logging_type( &mut self, logging_type: LoggingType, ) -> Result<(), Error>

Set Logging_Type, as a client’s write does: POLLED or TRIGGERED. COV logging isn’t allowed for this object type (Clause 12.30.12), so COV, like any other value, is PROPERTY / VALUE_OUT_OF_RANGE and changes nothing. POLLED with a zero Log_Interval sets DEFAULT_LOG_INTERVAL; TRIGGERED sets Log_Interval to zero.

pub fn set_log_interval(&mut self, hundredths: u32) -> Result<(), Error>

Set Log_Interval in hundredths of a second. While Logging_Type is TRIGGERED it is read-only and this is PROPERTY / WRITE_ACCESS_DENIED.

pub fn set_start_time(&mut self, date: Date, time: Time) -> Result<(), Error>

Set Start_Time, the local date and time from which records are kept, as local configuration: nothing is recorded for the change itself, but the log notes at once where the window stands, so a client’s write that then opens or shuts it is recorded. Every field unspecified leaves the start open. Any other value has to name an actual date and time, or it is PROPERTY / VALUE_OUT_OF_RANGE: the weekday may stay unspecified, and unspecified seconds or hundredths count as zero.

pub fn set_stop_time(&mut self, date: Date, time: Time) -> Result<(), Error>

Set Stop_Time, the local date and time from which records are no longer kept, under the same rules as set_start_time.

pub fn set_align_intervals(&mut self, align: bool)

Set Align_Intervals: whether a POLLED log acquires at clock-aligned times.

pub fn set_interval_offset(&mut self, hundredths: u32)

Set Interval_Offset, the delay after each aligned boundary, in hundredths; it applies modulo Log_Interval.

pub fn trigger(&mut self) -> Result<(), Error>

Ask for one acquisition, as a local process writing Trigger TRUE does. Only a TRIGGERED log takes it; any other is PROPERTY / NOT_CONFIGURED_FOR_TRIGGERED_LOGGING.

pub fn set_notification_threshold(&mut self, threshold: u32)

Set Notification_Threshold, the number of records that makes a BUFFER_READY report; zero, the default, makes none.

pub fn set_notification_class(&mut self, class: u32)

Set Notification_Class: the number of the Notification Class whose recipients get the log’s reports (0 by default).

pub fn set_event_enable(&mut self, enable: EventTransitionBits)

Set Event_Enable; a report goes out only while its TO_NORMAL flag is set, as it is by default.

pub fn set_notify_type(&mut self, notify_type: NotifyType)

Set Notify_Type, sent with each report (EVENT by default).

Trait Implementations

impl BACnetObject for TrendLogMultipleObject

fn object_identifier(&self) -> ObjectIdentifier

The object’s identifier (type + instance).

fn object_name(&self) -> &str

The object’s name.

fn read_property( &self, property: PropertyIdentifier, array_index: Option<u32>, ) -> Result<PropertyValue, Error>

Read a property value.

fn write_property( &mut self, property: PropertyIdentifier, array_index: Option<u32>, value: PropertyValue, _priority: Option<u8>, ) -> Result<(), Error>

Write a property value.

fn property_metadata(&self) -> Cow<'_, [PropertyMetadata]>

Return canonical metadata for this object’s effective property rows.

fn property_list(&self) -> Cow<'static, [PropertyIdentifier]>

List all properties this object supports in the legacy projection.

fn log_record_identities_internal(&self) -> Option<Vec<LogRecordIdentity>>

Return stable identities aligned with this object’s resident log records.

fn log_buffer_internal(&self) -> Option<&dyn LogBufferRecords>

Borrow this object’s Log_Buffer records as ReadRange pages them.

fn add_trend_multiple_record( &mut self, record: BACnetLogMultipleRecord, ) -> Result<(), Error>

Submit a Trend Log Multiple record, one value per monitored member, to an object’s log lifecycle.

fn evaluate_intrinsic_reporting(&mut self) -> Option<TransitionOutcome>

Evaluate intrinsic reporting after a present_value change.

fn tick_intrinsic_reporting(&mut self) -> Option<TransitionOutcome>

Advance the Time_Delay countdown for a pending transition.

fn write_property_from( &mut self, property: PropertyIdentifier, array_index: Option<u32>, value: PropertyValue, priority: Option<u8>, _origin: &CommandOrigin, ) -> Result<(), Error>

Write with explicit actual command provenance. Standalone callers assert the origin; server boundaries additionally validate ingress or membership. Decorators must forward this hook without discarding the origin. The default preserves custom/unaffected object behavior. First-party source-tracked commands require this hook and deny context-free writing.

fn is_writable_property(&self, property: PropertyIdentifier) -> bool

Whether a property write route can accept property for this object.

fn is_array_property(&self, property: PropertyIdentifier) -> bool

Whether property accepts an array index on this object.

fn is_list_property(&self, property: PropertyIdentifier) -> bool

Whether property is a BACnetLIST on this object.

fn is_createable(&self) -> bool

Whether this object type can be created at runtime via CreateObject.

fn creation_only_properties(&self) -> &'static [PropertyIdentifier]

The properties whose whole value a CreateObject initial value may set on this object although WriteProperty can’t change it afterwards.

fn initialize_property( &mut self, _property: PropertyIdentifier, _value: PropertyValue, ) -> Result<(), Error>

Apply a CreateObject initial value to one of Self::creation_only_properties, written whole.

fn is_deleteable(&self) -> bool

Whether this object type can be deleted at runtime via DeleteObject.

fn required_properties(&self) -> Cow<'static, [PropertyIdentifier]>

List the REQUIRED properties for this object type.

fn supports_cov(&self) -> bool

Whether this object type supports COV notifications.

fn supports_subscribe_cov_property(&self) -> bool

Whether SubscribeCOVProperty and SubscribeCOVPropertyMultiple may monitor this object’s properties.

fn supports_cov_property(&self, property: PropertyIdentifier) -> bool

Whether a readable property supports property-specific COV.

fn cov_increment(&self) -> Option<f64>

COV increment for this object (objects with a COV_Increment property).

fn cov_reported_properties(&self) -> &'static [CovReportedProperty]

Properties a whole-object (SubscribeCOV) notification reports after its leading value and Status_Flags, in report order.

fn set_overridden(&mut self, _overridden: bool)

Set the OVERRIDDEN bit in StatusFlags.

fn tick_schedule( &mut self, _today: SpecificDate, _time: Time, _calendar_active: &dyn Fn(ObjectIdentifier) -> bool, ) -> Option<ScheduleWrite>

Evaluate this object’s schedule at time on today (Clause 12.24.4).

fn take_owed_schedule_writes(&mut self) -> Vec<ScheduleWrite>

Take the writes this schedule owes its targets apart from its calculation, each once, in order: a NULL to every priority slot a change of List_Of_Object_Property_References or Priority_For_Writing left behind (#1088), then the Present_Value owed out of service, for a client’s write (Clause 12.24.14) or a change of those two properties.

fn complete_schedule_write( &mut self, _write: &ScheduleWrite, _outcomes: &[ScheduleTargetOutcome], ) -> bool

Report how each target took write, one of this schedule’s writes: outcomes holds one entry per member of write.references, in order.

fn retry_refusals_naming( &self, _target: ObjectIdentifier, ) -> Option<ScheduleWrite>

The retry of the current value to the references whose last write was refused and that name target, an object just added to the database (#1440), so the refusal can clear without waiting for the next pass. None when no such refusal stands, or when the pass itself would retry nothing: out of service, outside Effective_Period, or with a NULL Present_Value. Only meaningful for Schedule objects; default returns None.

fn acknowledge_alarm( &mut self, _transition_bit: EventTransitionBits, ) -> Result<(), Error>

Acknowledge an alarm transition. Sets the transition_bit flags in acked_transitions. Returns Ok(()) if the object supports event detection, Err otherwise.

fn apply_life_safety_operation( &mut self, _operation: LifeSafetyOperation, ) -> Result<LifeSafetyOperationOutcome, Error>

Apply a LifeSafetyOperation atomically to this object.

fn set_life_safety_operation_expected_internal( &mut self, _operation: LifeSafetyOperation, ) -> Result<(), Error>

Set the next LifeSafetyOperation expected by trusted local logic.

fn set_event_state_internal(&mut self, _state: EventState) -> Result<(), Error>

Apply an internally-detected Event_State transition.

fn enrollment_eval_state_internal(&self) -> Option<EventEnrollmentEvalState>

Snapshot this object’s Event Enrollment evaluation state, if it models one.

fn set_enrollment_eval_state_internal( &mut self, _state: EventEnrollmentEvalState, ) -> Result<(), Error>

Store this object’s Event Enrollment evaluation state.

fn enrollment_eval_source_internal( &self, ) -> Option<Option<EventEnrollmentMonitoredSource>>

Snapshot the monitored source that owns Event Enrollment private state.

fn set_enrollment_eval_source_internal( &mut self, _source: Option<EventEnrollmentMonitoredSource>, ) -> Result<(), Error>

Store or clear the monitored source that owns Event Enrollment state.

fn set_acked_transitions_internal( &mut self, _transition_bit: EventTransitionBits, _acknowledged: bool, ) -> Result<(), Error>

Set or clear one Acked_Transitions bit on a received event-state transition.

fn evaluate_reliability_internal( &mut self, ) -> Result<ReliabilityEvaluation, Error>

Evaluate and, when necessary, mutate this object’s Reliability.

fn set_reliability_internal( &mut self, _reliability: Reliability, ) -> Result<(), Error>

Apply an internally-derived Reliability value.

fn set_present_value_internal( &mut self, _value: PropertyValue, ) -> Result<(), Error>

Apply the logical Present_Value supplied by the local application.

fn set_present_value_from_internal( &mut self, value: PropertyValue, _origin: &CommandOrigin, ) -> Result<(), Error>

set_present_value_internal on behalf of origin, the local Device the application runs in.

fn set_tracking_value_internal( &mut self, _value: PropertyValue, ) -> Result<(), Error>

Apply the Tracking_Value the local application derived.

fn report_access_input_internal( &mut self, _input: AccessControlInput, ) -> Result<(), Error>

Apply an input the application reports for an access-control object the server holds (#1132): an Access Point’s access event, a Credential Data Input’s read or an Access Door’s hardware state, each a record whose values change together. See AccessControlInput.

fn set_controlled_variable_value_internal( &mut self, _value: PropertyValue, ) -> Result<(), Error>

Apply the Controlled_Variable_Value measured by the local application.

fn add_averaging_sample_internal( &mut self, _sample: Option<PropertyValue>, ) -> Result<(), Error>

Record one sample for an Averaging object.

fn audit_log_storage_internal(&self) -> Option<&dyn AuditLogStorage>

Borrow this object’s Audit Log query storage, if it has any.

fn audit_log_notification_sink_internal( &mut self, ) -> Option<&mut dyn AuditLogNotificationSink>

Mutably borrow this object’s Audit notification receiver capability.

fn file_storage_internal(&self) -> Option<&dyn FileStorage>

Borrow this object’s File storage, if it has any.

fn file_storage_internal_mut(&mut self) -> Option<&mut dyn FileStorage>

Mutably borrow this object’s File storage, if it has any.

fn add_trend_record(&mut self, _record: BACnetLogRecord) -> Result<(), Error>

Submit a trend record to an object’s log lifecycle.

fn add_event_log_record( &mut self, _record: BACnetEventLogRecord, ) -> Result<(), Error>

Submit an Event Log record to an object’s log lifecycle.