pub struct UpdateIPSetFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to UpdateIPSet.

Updates the specified IPSet.

This operation completely replaces the mutable specifications that you already have for the IP set with the ones that you provide to this call.

To modify an IP set, do the following:

  1. Retrieve it by calling GetIPSet

  2. Update its settings as needed

  3. Provide the complete IP set specification to this call

Temporary inconsistencies during updates

When you create or change a web ACL or other WAF resources, the changes take a small amount of time to propagate to all areas where the resources are stored. The propagation time can be from a few seconds to a number of minutes.

The following are examples of the temporary inconsistencies that you might notice during change propagation:

  • After you create a web ACL, if you try to associate it with a resource, you might get an exception indicating that the web ACL is unavailable.

  • After you add a rule group to a web ACL, the new rule group rules might be in effect in one area where the web ACL is used and not in another.

  • After you change a rule action setting, you might see the old action in some places and the new action in others.

  • After you add an IP address to an IP set that is in use in a blocking rule, the new address might be blocked in one area while still allowed in another.

Implementations§

source§

impl UpdateIPSetFluentBuilder

source

pub fn as_input(&self) -> &UpdateIpSetInputBuilder

Access the UpdateIPSet as a reference.

source

pub async fn send( self ) -> Result<UpdateIpSetOutput, SdkError<UpdateIPSetError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub fn customize( self ) -> CustomizableOperation<UpdateIpSetOutput, UpdateIPSetError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

source

pub fn name(self, input: impl Into<String>) -> Self

The name of the IP set. You cannot change the name of an IPSet after you create it.

source

pub fn set_name(self, input: Option<String>) -> Self

The name of the IP set. You cannot change the name of an IPSet after you create it.

source

pub fn get_name(&self) -> &Option<String>

The name of the IP set. You cannot change the name of an IPSet after you create it.

source

pub fn scope(self, input: Scope) -> Self

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

  • CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

  • API and SDKs - For all calls, use the Region endpoint us-east-1.

source

pub fn set_scope(self, input: Option<Scope>) -> Self

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

  • CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

  • API and SDKs - For all calls, use the Region endpoint us-east-1.

source

pub fn get_scope(&self) -> &Option<Scope>

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

  • CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

  • API and SDKs - For all calls, use the Region endpoint us-east-1.

source

pub fn id(self, input: impl Into<String>) -> Self

A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.

source

pub fn set_id(self, input: Option<String>) -> Self

A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.

source

pub fn get_id(&self) -> &Option<String>

A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.

source

pub fn description(self, input: impl Into<String>) -> Self

A description of the IP set that helps with identification.

source

pub fn set_description(self, input: Option<String>) -> Self

A description of the IP set that helps with identification.

source

pub fn get_description(&self) -> &Option<String>

A description of the IP set that helps with identification.

source

pub fn addresses(self, input: impl Into<String>) -> Self

Appends an item to Addresses.

To override the contents of this collection use set_addresses.

Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.

Example address strings:

  • For requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.

  • For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.

  • For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.

  • For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.

For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.

Example JSON Addresses specifications:

  • Empty array: "Addresses": []

  • Array with one address: "Addresses": ["192.0.2.44/32"]

  • Array with three addresses: "Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]

  • INVALID specification: "Addresses": [""] INVALID

source

pub fn set_addresses(self, input: Option<Vec<String>>) -> Self

Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.

Example address strings:

  • For requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.

  • For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.

  • For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.

  • For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.

For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.

Example JSON Addresses specifications:

  • Empty array: "Addresses": []

  • Array with one address: "Addresses": ["192.0.2.44/32"]

  • Array with three addresses: "Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]

  • INVALID specification: "Addresses": [""] INVALID

source

pub fn get_addresses(&self) -> &Option<Vec<String>>

Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.

Example address strings:

  • For requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.

  • For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.

  • For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.

  • For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.

For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.

Example JSON Addresses specifications:

  • Empty array: "Addresses": []

  • Array with one address: "Addresses": ["192.0.2.44/32"]

  • Array with three addresses: "Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]

  • INVALID specification: "Addresses": [""] INVALID

source

pub fn lock_token(self, input: impl Into<String>) -> Self

A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.

source

pub fn set_lock_token(self, input: Option<String>) -> Self

A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.

source

pub fn get_lock_token(&self) -> &Option<String>

A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.

Trait Implementations§

source§

impl Clone for UpdateIPSetFluentBuilder

source§

fn clone(&self) -> UpdateIPSetFluentBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for UpdateIPSetFluentBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more