Struct aws_sdk_wafv2::operation::create_ip_set::builders::CreateIPSetFluentBuilder

source · 
pub struct CreateIPSetFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to CreateIPSet.

Creates an IPSet, which you use to identify web requests that originate from specific IP addresses or ranges of IP addresses. For example, if you're receiving a lot of requests from a ranges of IP addresses, you can configure WAF to block them using an IPSet that lists those IP addresses.

Implementations§

source§

impl CreateIPSetFluentBuilder

source

pub fn as_input(&self) -> &CreateIpSetInputBuilder

Access the CreateIPSet as a reference.

source

pub async fn send( self ) -> Result<CreateIpSetOutput, SdkError<CreateIPSetError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub fn customize( self ) -> CustomizableOperation<CreateIpSetOutput, CreateIPSetError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

source

pub fn name(self, input: impl Into<String>) -> Self

The name of the IP set. You cannot change the name of an IPSet after you create it.

source

pub fn set_name(self, input: Option<String>) -> Self

The name of the IP set. You cannot change the name of an IPSet after you create it.

source

pub fn get_name(&self) -> &Option<String>

The name of the IP set. You cannot change the name of an IPSet after you create it.

source

pub fn scope(self, input: Scope) -> Self

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

  • CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

  • API and SDKs - For all calls, use the Region endpoint us-east-1.

source

pub fn set_scope(self, input: Option<Scope>) -> Self

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

  • CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

  • API and SDKs - For all calls, use the Region endpoint us-east-1.

source

pub fn get_scope(&self) -> &Option<Scope>

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

  • CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

  • API and SDKs - For all calls, use the Region endpoint us-east-1.

source

pub fn description(self, input: impl Into<String>) -> Self

A description of the IP set that helps with identification.

source

pub fn set_description(self, input: Option<String>) -> Self

A description of the IP set that helps with identification.

source

pub fn get_description(&self) -> &Option<String>

A description of the IP set that helps with identification.

source

pub fn ip_address_version(self, input: IpAddressVersion) -> Self

The version of the IP addresses, either IPV4 or IPV6.

source

pub fn set_ip_address_version(self, input: Option<IpAddressVersion>) -> Self

The version of the IP addresses, either IPV4 or IPV6.

source

pub fn get_ip_address_version(&self) -> &Option<IpAddressVersion>

The version of the IP addresses, either IPV4 or IPV6.

source

pub fn addresses(self, input: impl Into<String>) -> Self

Appends an item to Addresses.

To override the contents of this collection use set_addresses.

Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.

Example address strings:

  • For requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.

  • For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.

  • For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.

  • For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.

For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.

Example JSON Addresses specifications:

  • Empty array: "Addresses": []

  • Array with one address: "Addresses": ["192.0.2.44/32"]

  • Array with three addresses: "Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]

  • INVALID specification: "Addresses": [""] INVALID

source

pub fn set_addresses(self, input: Option<Vec<String>>) -> Self

Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.

Example address strings:

  • For requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.

  • For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.

  • For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.

  • For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.

For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.

Example JSON Addresses specifications:

  • Empty array: "Addresses": []

  • Array with one address: "Addresses": ["192.0.2.44/32"]

  • Array with three addresses: "Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]

  • INVALID specification: "Addresses": [""] INVALID

source

pub fn get_addresses(&self) -> &Option<Vec<String>>

Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.

Example address strings:

  • For requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.

  • For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.

  • For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.

  • For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.

For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.

Example JSON Addresses specifications:

  • Empty array: "Addresses": []

  • Array with one address: "Addresses": ["192.0.2.44/32"]

  • Array with three addresses: "Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]

  • INVALID specification: "Addresses": [""] INVALID

source

pub fn tags(self, input: Tag) -> Self

Appends an item to Tags.

To override the contents of this collection use set_tags.

An array of key:value pairs to associate with the resource.

source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

An array of key:value pairs to associate with the resource.

source

pub fn get_tags(&self) -> &Option<Vec<Tag>>

An array of key:value pairs to associate with the resource.

Trait Implementations§

source§

impl Clone for CreateIPSetFluentBuilder

source§

fn clone(&self) -> CreateIPSetFluentBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for CreateIPSetFluentBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more