#[non_exhaustive]pub struct UpdateIpSetInputBuilder { /* private fields */ }
Expand description
A builder for UpdateIpSetInput
.
Implementations§
source§impl UpdateIpSetInputBuilder
impl UpdateIpSetInputBuilder
sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
The name of the IP set. You cannot change the name of an IPSet
after you create it.
sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
The name of the IP set. You cannot change the name of an IPSet
after you create it.
sourcepub fn get_name(&self) -> &Option<String>
pub fn get_name(&self) -> &Option<String>
The name of the IP set. You cannot change the name of an IPSet
after you create it.
sourcepub fn scope(self, input: Scope) -> Self
pub fn scope(self, input: Scope) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1
. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
sourcepub fn set_scope(self, input: Option<Scope>) -> Self
pub fn set_scope(self, input: Option<Scope>) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1
. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
sourcepub fn get_scope(&self) -> &Option<Scope>
pub fn get_scope(&self) -> &Option<Scope>
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1
. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
sourcepub fn id(self, input: impl Into<String>) -> Self
pub fn id(self, input: impl Into<String>) -> Self
A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
This field is required.sourcepub fn set_id(self, input: Option<String>) -> Self
pub fn set_id(self, input: Option<String>) -> Self
A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
sourcepub fn get_id(&self) -> &Option<String>
pub fn get_id(&self) -> &Option<String>
A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
A description of the IP set that helps with identification.
sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
A description of the IP set that helps with identification.
sourcepub fn get_description(&self) -> &Option<String>
pub fn get_description(&self) -> &Option<String>
A description of the IP set that helps with identification.
sourcepub fn addresses(self, input: impl Into<String>) -> Self
pub fn addresses(self, input: impl Into<String>) -> Self
Appends an item to addresses
.
To override the contents of this collection use set_addresses
.
Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0
.
Example address strings:
-
For requests that originated from the IP address 192.0.2.44, specify
192.0.2.44/32
. -
For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify
192.0.2.0/24
. -
For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify
1111:0000:0000:0000:0000:0000:0000:0111/128
. -
For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
1111:0000:0000:0000:0000:0000:0000:0000/64
.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
Example JSON Addresses
specifications:
-
Empty array:
"Addresses": []
-
Array with one address:
"Addresses": ["192.0.2.44/32"]
-
Array with three addresses:
"Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]
-
INVALID specification:
"Addresses": [""]
INVALID
sourcepub fn set_addresses(self, input: Option<Vec<String>>) -> Self
pub fn set_addresses(self, input: Option<Vec<String>>) -> Self
Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0
.
Example address strings:
-
For requests that originated from the IP address 192.0.2.44, specify
192.0.2.44/32
. -
For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify
192.0.2.0/24
. -
For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify
1111:0000:0000:0000:0000:0000:0000:0111/128
. -
For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
1111:0000:0000:0000:0000:0000:0000:0000/64
.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
Example JSON Addresses
specifications:
-
Empty array:
"Addresses": []
-
Array with one address:
"Addresses": ["192.0.2.44/32"]
-
Array with three addresses:
"Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]
-
INVALID specification:
"Addresses": [""]
INVALID
sourcepub fn get_addresses(&self) -> &Option<Vec<String>>
pub fn get_addresses(&self) -> &Option<Vec<String>>
Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0
.
Example address strings:
-
For requests that originated from the IP address 192.0.2.44, specify
192.0.2.44/32
. -
For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify
192.0.2.0/24
. -
For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify
1111:0000:0000:0000:0000:0000:0000:0111/128
. -
For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
1111:0000:0000:0000:0000:0000:0000:0000/64
.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
Example JSON Addresses
specifications:
-
Empty array:
"Addresses": []
-
Array with one address:
"Addresses": ["192.0.2.44/32"]
-
Array with three addresses:
"Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]
-
INVALID specification:
"Addresses": [""]
INVALID
sourcepub fn lock_token(self, input: impl Into<String>) -> Self
pub fn lock_token(self, input: impl Into<String>) -> Self
A token used for optimistic locking. WAF returns a token to your get
and list
requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update
and delete
. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException
. If this happens, perform another get
, and use the new token returned by that operation.
sourcepub fn set_lock_token(self, input: Option<String>) -> Self
pub fn set_lock_token(self, input: Option<String>) -> Self
A token used for optimistic locking. WAF returns a token to your get
and list
requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update
and delete
. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException
. If this happens, perform another get
, and use the new token returned by that operation.
sourcepub fn get_lock_token(&self) -> &Option<String>
pub fn get_lock_token(&self) -> &Option<String>
A token used for optimistic locking. WAF returns a token to your get
and list
requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update
and delete
. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException
. If this happens, perform another get
, and use the new token returned by that operation.
sourcepub fn build(self) -> Result<UpdateIpSetInput, BuildError>
pub fn build(self) -> Result<UpdateIpSetInput, BuildError>
Consumes the builder and constructs a UpdateIpSetInput
.
source§impl UpdateIpSetInputBuilder
impl UpdateIpSetInputBuilder
sourcepub async fn send_with(
self,
client: &Client
) -> Result<UpdateIpSetOutput, SdkError<UpdateIPSetError, HttpResponse>>
pub async fn send_with( self, client: &Client ) -> Result<UpdateIpSetOutput, SdkError<UpdateIPSetError, HttpResponse>>
Sends a request with this input using the given client.
Trait Implementations§
source§impl Clone for UpdateIpSetInputBuilder
impl Clone for UpdateIpSetInputBuilder
source§fn clone(&self) -> UpdateIpSetInputBuilder
fn clone(&self) -> UpdateIpSetInputBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for UpdateIpSetInputBuilder
impl Debug for UpdateIpSetInputBuilder
source§impl Default for UpdateIpSetInputBuilder
impl Default for UpdateIpSetInputBuilder
source§fn default() -> UpdateIpSetInputBuilder
fn default() -> UpdateIpSetInputBuilder
source§impl PartialEq for UpdateIpSetInputBuilder
impl PartialEq for UpdateIpSetInputBuilder
source§fn eq(&self, other: &UpdateIpSetInputBuilder) -> bool
fn eq(&self, other: &UpdateIpSetInputBuilder) -> bool
self
and other
values to be equal, and is used
by ==
.