Struct aws_sdk_wafv2::client::fluent_builders::CreateIPSet
source · [−]pub struct CreateIPSet { /* private fields */ }Expand description
Fluent builder constructing a request to CreateIPSet.
Creates an IPSet, which you use to identify web requests that originate from specific IP addresses or ranges of IP addresses. For example, if you're receiving a lot of requests from a ranges of IP addresses, you can configure WAF to block them using an IPSet that lists those IP addresses.
Implementations
sourceimpl CreateIPSet
impl CreateIPSet
sourcepub async fn send(self) -> Result<CreateIpSetOutput, SdkError<CreateIPSetError>>
pub async fn send(self) -> Result<CreateIpSetOutput, SdkError<CreateIPSetError>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
The name of the IP set. You cannot change the name of an IPSet after you create it.
sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
The name of the IP set. You cannot change the name of an IPSet after you create it.
sourcepub fn scope(self, input: Scope) -> Self
pub fn scope(self, input: Scope) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, or an AppSync GraphQL API.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
sourcepub fn set_scope(self, input: Option<Scope>) -> Self
pub fn set_scope(self, input: Option<Scope>) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, or an AppSync GraphQL API.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
A description of the IP set that helps with identification.
sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
A description of the IP set that helps with identification.
sourcepub fn ip_address_version(self, input: IpAddressVersion) -> Self
pub fn ip_address_version(self, input: IpAddressVersion) -> Self
The version of the IP addresses, either IPV4 or IPV6.
sourcepub fn set_ip_address_version(self, input: Option<IpAddressVersion>) -> Self
pub fn set_ip_address_version(self, input: Option<IpAddressVersion>) -> Self
The version of the IP addresses, either IPV4 or IPV6.
sourcepub fn addresses(self, input: impl Into<String>) -> Self
pub fn addresses(self, input: impl Into<String>) -> Self
Appends an item to Addresses.
To override the contents of this collection use set_addresses.
Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses in Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.
Example address strings:
-
To configure WAF to allow, block, or count requests that originated from the IP address 192.0.2.44, specify
192.0.2.44/32. -
To configure WAF to allow, block, or count requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify
192.0.2.0/24. -
To configure WAF to allow, block, or count requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify
1111:0000:0000:0000:0000:0000:0000:0111/128. -
To configure WAF to allow, block, or count requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
1111:0000:0000:0000:0000:0000:0000:0000/64.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
Example JSON Addresses specifications:
-
Empty array:
"Addresses": [] -
Array with one address:
"Addresses": ["192.0.2.44/32"] -
Array with three addresses:
"Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"] -
INVALID specification:
"Addresses": [""]INVALID
sourcepub fn set_addresses(self, input: Option<Vec<String>>) -> Self
pub fn set_addresses(self, input: Option<Vec<String>>) -> Self
Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses in Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0.
Example address strings:
-
To configure WAF to allow, block, or count requests that originated from the IP address 192.0.2.44, specify
192.0.2.44/32. -
To configure WAF to allow, block, or count requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify
192.0.2.0/24. -
To configure WAF to allow, block, or count requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify
1111:0000:0000:0000:0000:0000:0000:0111/128. -
To configure WAF to allow, block, or count requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
1111:0000:0000:0000:0000:0000:0000:0000/64.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
Example JSON Addresses specifications:
-
Empty array:
"Addresses": [] -
Array with one address:
"Addresses": ["192.0.2.44/32"] -
Array with three addresses:
"Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"] -
INVALID specification:
"Addresses": [""]INVALID
Appends an item to Tags.
To override the contents of this collection use set_tags.
An array of key:value pairs to associate with the resource.
An array of key:value pairs to associate with the resource.
Trait Implementations
sourceimpl Clone for CreateIPSet
impl Clone for CreateIPSet
sourcefn clone(&self) -> CreateIPSet
fn clone(&self) -> CreateIPSet
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source. Read more
Auto Trait Implementations
impl !RefUnwindSafe for CreateIPSet
impl Send for CreateIPSet
impl Sync for CreateIPSet
impl Unpin for CreateIPSet
impl !UnwindSafe for CreateIPSet
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber to this type, returning a
WithDispatch wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber to this type, returning a
WithDispatch wrapper. Read more