Struct aws_sdk_wafv2::client::Client

pub struct Client<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

An ergonomic service client for AWSWAF_20190729.

This client allows ergonomic access to a AWSWAF_20190729-shaped service. Each method corresponds to an endpoint defined in the service’s Smithy model, and the request and response shapes are auto-generated from that same model.

Using a Client

Once you have a client set up, you can access the service’s endpoints by calling the appropriate method on Client. Each such method returns a request builder for that endpoint, with methods for setting the various fields of the request. Once your request is complete, use the send method to send the request. send returns a future, which you then have to .await to get the service’s response.

Implementations

impl<C, M, R> Client<C, M, R>

pub fn with_config(client: Client<C, M, R>, conf: Config) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl<C, M, R> Client<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub fn associate_web_acl(&self) -> AssociateWebACL<C, M, R>

Constructs a fluent builder for the AssociateWebACL operation.

See AssociateWebACL for more information about the operation and its arguments.

pub fn check_capacity(&self) -> CheckCapacity<C, M, R>

Constructs a fluent builder for the CheckCapacity operation.

See CheckCapacity for more information about the operation and its arguments.

pub fn create_ip_set(&self) -> CreateIPSet<C, M, R>

Constructs a fluent builder for the CreateIPSet operation.

See CreateIPSet for more information about the operation and its arguments.

pub fn create_regex_pattern_set(&self) -> CreateRegexPatternSet<C, M, R>

Constructs a fluent builder for the CreateRegexPatternSet operation.

See CreateRegexPatternSet for more information about the operation and its arguments.

pub fn create_rule_group(&self) -> CreateRuleGroup<C, M, R>

Constructs a fluent builder for the CreateRuleGroup operation.

See CreateRuleGroup for more information about the operation and its arguments.

pub fn create_web_acl(&self) -> CreateWebACL<C, M, R>

Constructs a fluent builder for the CreateWebACL operation.

See CreateWebACL for more information about the operation and its arguments.

pub fn delete_firewall_manager_rule_groups(
    &self
) -> DeleteFirewallManagerRuleGroups<C, M, R>

Constructs a fluent builder for the DeleteFirewallManagerRuleGroups operation.

See DeleteFirewallManagerRuleGroups for more information about the operation and its arguments.

pub fn delete_ip_set(&self) -> DeleteIPSet<C, M, R>

Constructs a fluent builder for the DeleteIPSet operation.

See DeleteIPSet for more information about the operation and its arguments.

pub fn delete_logging_configuration(
    &self
) -> DeleteLoggingConfiguration<C, M, R>

Constructs a fluent builder for the DeleteLoggingConfiguration operation.

See DeleteLoggingConfiguration for more information about the operation and its arguments.

pub fn delete_permission_policy(&self) -> DeletePermissionPolicy<C, M, R>

Constructs a fluent builder for the DeletePermissionPolicy operation.

See DeletePermissionPolicy for more information about the operation and its arguments.

pub fn delete_regex_pattern_set(&self) -> DeleteRegexPatternSet<C, M, R>

Constructs a fluent builder for the DeleteRegexPatternSet operation.

See DeleteRegexPatternSet for more information about the operation and its arguments.

pub fn delete_rule_group(&self) -> DeleteRuleGroup<C, M, R>

Constructs a fluent builder for the DeleteRuleGroup operation.

See DeleteRuleGroup for more information about the operation and its arguments.

pub fn delete_web_acl(&self) -> DeleteWebACL<C, M, R>

Constructs a fluent builder for the DeleteWebACL operation.

See DeleteWebACL for more information about the operation and its arguments.

pub fn describe_managed_rule_group(&self) -> DescribeManagedRuleGroup<C, M, R>

Constructs a fluent builder for the DescribeManagedRuleGroup operation.

See DescribeManagedRuleGroup for more information about the operation and its arguments.

pub fn disassociate_web_acl(&self) -> DisassociateWebACL<C, M, R>

Constructs a fluent builder for the DisassociateWebACL operation.

See DisassociateWebACL for more information about the operation and its arguments.

pub fn get_ip_set(&self) -> GetIPSet<C, M, R>

Constructs a fluent builder for the GetIPSet operation.

See GetIPSet for more information about the operation and its arguments.

pub fn get_logging_configuration(&self) -> GetLoggingConfiguration<C, M, R>

Constructs a fluent builder for the GetLoggingConfiguration operation.

See GetLoggingConfiguration for more information about the operation and its arguments.

pub fn get_managed_rule_set(&self) -> GetManagedRuleSet<C, M, R>

Constructs a fluent builder for the GetManagedRuleSet operation.

See GetManagedRuleSet for more information about the operation and its arguments.

pub fn get_permission_policy(&self) -> GetPermissionPolicy<C, M, R>

Constructs a fluent builder for the GetPermissionPolicy operation.

See GetPermissionPolicy for more information about the operation and its arguments.

pub fn get_rate_based_statement_managed_keys(
    &self
) -> GetRateBasedStatementManagedKeys<C, M, R>

Constructs a fluent builder for the GetRateBasedStatementManagedKeys operation.

See GetRateBasedStatementManagedKeys for more information about the operation and its arguments.

pub fn get_regex_pattern_set(&self) -> GetRegexPatternSet<C, M, R>

Constructs a fluent builder for the GetRegexPatternSet operation.

See GetRegexPatternSet for more information about the operation and its arguments.

pub fn get_rule_group(&self) -> GetRuleGroup<C, M, R>

Constructs a fluent builder for the GetRuleGroup operation.

See GetRuleGroup for more information about the operation and its arguments.

pub fn get_sampled_requests(&self) -> GetSampledRequests<C, M, R>

Constructs a fluent builder for the GetSampledRequests operation.

See GetSampledRequests for more information about the operation and its arguments.

pub fn get_web_acl(&self) -> GetWebACL<C, M, R>

Constructs a fluent builder for the GetWebACL operation.

See GetWebACL for more information about the operation and its arguments.

pub fn get_web_acl_for_resource(&self) -> GetWebACLForResource<C, M, R>

Constructs a fluent builder for the GetWebACLForResource operation.

See GetWebACLForResource for more information about the operation and its arguments.

pub fn list_available_managed_rule_groups(
    &self
) -> ListAvailableManagedRuleGroups<C, M, R>

Constructs a fluent builder for the ListAvailableManagedRuleGroups operation.

See ListAvailableManagedRuleGroups for more information about the operation and its arguments.

pub fn list_available_managed_rule_group_versions(
    &self
) -> ListAvailableManagedRuleGroupVersions<C, M, R>

Constructs a fluent builder for the ListAvailableManagedRuleGroupVersions operation.

See ListAvailableManagedRuleGroupVersions for more information about the operation and its arguments.

pub fn list_ip_sets(&self) -> ListIPSets<C, M, R>

Constructs a fluent builder for the ListIPSets operation.

See ListIPSets for more information about the operation and its arguments.

pub fn list_logging_configurations(&self) -> ListLoggingConfigurations<C, M, R>

Constructs a fluent builder for the ListLoggingConfigurations operation.

See ListLoggingConfigurations for more information about the operation and its arguments.

pub fn list_managed_rule_sets(&self) -> ListManagedRuleSets<C, M, R>

Constructs a fluent builder for the ListManagedRuleSets operation.

See ListManagedRuleSets for more information about the operation and its arguments.

pub fn list_regex_pattern_sets(&self) -> ListRegexPatternSets<C, M, R>

Constructs a fluent builder for the ListRegexPatternSets operation.

See ListRegexPatternSets for more information about the operation and its arguments.

pub fn list_resources_for_web_acl(&self) -> ListResourcesForWebACL<C, M, R>

Constructs a fluent builder for the ListResourcesForWebACL operation.

See ListResourcesForWebACL for more information about the operation and its arguments.

pub fn list_rule_groups(&self) -> ListRuleGroups<C, M, R>

Constructs a fluent builder for the ListRuleGroups operation.

See ListRuleGroups for more information about the operation and its arguments.

pub fn list_tags_for_resource(&self) -> ListTagsForResource<C, M, R>

Constructs a fluent builder for the ListTagsForResource operation.

See ListTagsForResource for more information about the operation and its arguments.

pub fn list_web_ac_ls(&self) -> ListWebACLs<C, M, R>

Constructs a fluent builder for the ListWebACLs operation.

See ListWebACLs for more information about the operation and its arguments.

pub fn put_logging_configuration(&self) -> PutLoggingConfiguration<C, M, R>

Constructs a fluent builder for the PutLoggingConfiguration operation.

See PutLoggingConfiguration for more information about the operation and its arguments.

pub fn put_managed_rule_set_versions(
    &self
) -> PutManagedRuleSetVersions<C, M, R>

Constructs a fluent builder for the PutManagedRuleSetVersions operation.

See PutManagedRuleSetVersions for more information about the operation and its arguments.

pub fn put_permission_policy(&self) -> PutPermissionPolicy<C, M, R>

Constructs a fluent builder for the PutPermissionPolicy operation.

See PutPermissionPolicy for more information about the operation and its arguments.

pub fn tag_resource(&self) -> TagResource<C, M, R>

Constructs a fluent builder for the TagResource operation.

See TagResource for more information about the operation and its arguments.

pub fn untag_resource(&self) -> UntagResource<C, M, R>

Constructs a fluent builder for the UntagResource operation.

See UntagResource for more information about the operation and its arguments.

pub fn update_ip_set(&self) -> UpdateIPSet<C, M, R>

Constructs a fluent builder for the UpdateIPSet operation.

See UpdateIPSet for more information about the operation and its arguments.

pub fn update_managed_rule_set_version_expiry_date(
    &self
) -> UpdateManagedRuleSetVersionExpiryDate<C, M, R>

Constructs a fluent builder for the UpdateManagedRuleSetVersionExpiryDate operation.

See UpdateManagedRuleSetVersionExpiryDate for more information about the operation and its arguments.

pub fn update_regex_pattern_set(&self) -> UpdateRegexPatternSet<C, M, R>

Constructs a fluent builder for the UpdateRegexPatternSet operation.

See UpdateRegexPatternSet for more information about the operation and its arguments.

pub fn update_rule_group(&self) -> UpdateRuleGroup<C, M, R>

Constructs a fluent builder for the UpdateRuleGroup operation.

See UpdateRuleGroup for more information about the operation and its arguments.

pub fn update_web_acl(&self) -> UpdateWebACL<C, M, R>

Constructs a fluent builder for the UpdateWebACL operation.

See UpdateWebACL for more information about the operation and its arguments.

impl<C> Client<C, AwsMiddleware, Standard>

pub fn from_conf_conn(conf: Config, conn: C) -> Self

Creates a client with the given service config and connector override.

impl Client<DynConnector, AwsMiddleware, Standard>

pub fn new(config: &Config) -> Self

Creates a new client from a shared config.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Trait Implementations

impl<C, M, R> Clone for Client<C, M, R>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for Client<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C, M, R> From<Client<C, M, R>> for Client<C, M, R>

fn from(client: Client<C, M, R>) -> Self

Performs the conversion.