#[non_exhaustive]pub enum CreateParallelDataError {
ConcurrentModificationException(ConcurrentModificationException),
ConflictException(ConflictException),
InternalServerException(InternalServerException),
InvalidParameterValueException(InvalidParameterValueException),
InvalidRequestException(InvalidRequestException),
LimitExceededException(LimitExceededException),
TooManyRequestsException(TooManyRequestsException),
TooManyTagsException(TooManyTagsException),
Unhandled(Unhandled),
}
Expand description
Error type for the CreateParallelDataError
operation.
Variants (Non-exhaustive)§
This enum is marked as non-exhaustive
ConcurrentModificationException(ConcurrentModificationException)
Another modification is being made. That modification must complete before you can make your change.
ConflictException(ConflictException)
There was a conflict processing the request. Try your request again.
InternalServerException(InternalServerException)
An internal server error occurred. Retry your request.
InvalidParameterValueException(InvalidParameterValueException)
The value of the parameter is not valid. Review the value of the parameter you are using to correct it, and then retry your operation.
InvalidRequestException(InvalidRequestException)
The request that you made is not valid. Check your request to determine why it's not valid and then retry the request.
LimitExceededException(LimitExceededException)
The specified limit has been exceeded. Review your request and retry it with a quantity below the stated limit.
TooManyRequestsException(TooManyRequestsException)
You have made too many requests within a short period of time. Wait for a short time and then try your request again.
TooManyTagsException(TooManyTagsException)
You have added too many tags to this resource. The maximum is 50 tags.
Unhandled(Unhandled)
Unhandled
directly is not forwards compatible. Instead, match using a variable wildcard pattern and check .code()
:
err if err.code() == Some("SpecificExceptionCode") => { /* handle the error */ }
See ProvideErrorMetadata
for what information is available for the error.An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
Implementations§
Source§impl CreateParallelDataError
impl CreateParallelDataError
Sourcepub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self
pub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self
Creates the CreateParallelDataError::Unhandled
variant from any error type.
Sourcepub fn generic(err: ErrorMetadata) -> Self
pub fn generic(err: ErrorMetadata) -> Self
Creates the CreateParallelDataError::Unhandled
variant from an ErrorMetadata
.
Sourcepub fn meta(&self) -> &ErrorMetadata
pub fn meta(&self) -> &ErrorMetadata
Returns error metadata, which includes the error code, message, request ID, and potentially additional information.
Sourcepub fn is_concurrent_modification_exception(&self) -> bool
pub fn is_concurrent_modification_exception(&self) -> bool
Returns true
if the error kind is CreateParallelDataError::ConcurrentModificationException
.
Sourcepub fn is_conflict_exception(&self) -> bool
pub fn is_conflict_exception(&self) -> bool
Returns true
if the error kind is CreateParallelDataError::ConflictException
.
Sourcepub fn is_internal_server_exception(&self) -> bool
pub fn is_internal_server_exception(&self) -> bool
Returns true
if the error kind is CreateParallelDataError::InternalServerException
.
Sourcepub fn is_invalid_parameter_value_exception(&self) -> bool
pub fn is_invalid_parameter_value_exception(&self) -> bool
Returns true
if the error kind is CreateParallelDataError::InvalidParameterValueException
.
Sourcepub fn is_invalid_request_exception(&self) -> bool
pub fn is_invalid_request_exception(&self) -> bool
Returns true
if the error kind is CreateParallelDataError::InvalidRequestException
.
Sourcepub fn is_limit_exceeded_exception(&self) -> bool
pub fn is_limit_exceeded_exception(&self) -> bool
Returns true
if the error kind is CreateParallelDataError::LimitExceededException
.
Sourcepub fn is_too_many_requests_exception(&self) -> bool
pub fn is_too_many_requests_exception(&self) -> bool
Returns true
if the error kind is CreateParallelDataError::TooManyRequestsException
.
Returns true
if the error kind is CreateParallelDataError::TooManyTagsException
.
Trait Implementations§
Source§impl CreateUnhandledError for CreateParallelDataError
impl CreateUnhandledError for CreateParallelDataError
Source§fn create_unhandled_error(
source: Box<dyn Error + Send + Sync + 'static>,
meta: Option<ErrorMetadata>,
) -> Self
fn create_unhandled_error( source: Box<dyn Error + Send + Sync + 'static>, meta: Option<ErrorMetadata>, ) -> Self
source
and error metadata.Source§impl Debug for CreateParallelDataError
impl Debug for CreateParallelDataError
Source§impl Display for CreateParallelDataError
impl Display for CreateParallelDataError
Source§impl Error for CreateParallelDataError
impl Error for CreateParallelDataError
Source§fn source(&self) -> Option<&(dyn Error + 'static)>
fn source(&self) -> Option<&(dyn Error + 'static)>
1.0.0 · Source§fn description(&self) -> &str
fn description(&self) -> &str
Source§impl From<CreateParallelDataError> for Error
impl From<CreateParallelDataError> for Error
Source§fn from(err: CreateParallelDataError) -> Self
fn from(err: CreateParallelDataError) -> Self
Source§impl ProvideErrorMetadata for CreateParallelDataError
impl ProvideErrorMetadata for CreateParallelDataError
Source§fn meta(&self) -> &ErrorMetadata
fn meta(&self) -> &ErrorMetadata
Source§impl RequestId for CreateParallelDataError
impl RequestId for CreateParallelDataError
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None
if the service could not be reached.Auto Trait Implementations§
impl Freeze for CreateParallelDataError
impl !RefUnwindSafe for CreateParallelDataError
impl Send for CreateParallelDataError
impl Sync for CreateParallelDataError
impl Unpin for CreateParallelDataError
impl !UnwindSafe for CreateParallelDataError
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);