pub struct ImportTerminologyFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ImportTerminology.
Creates or updates a custom terminology, depending on whether one already exists for the given terminology name. Importing a terminology with the same name as an existing one will merge the terminologies based on the chosen merge strategy. The only supported merge strategy is OVERWRITE, where the imported terminology overwrites the existing terminology of the same name.
If you import a terminology that overwrites an existing one, the new terminology takes up to 10 minutes to fully propagate. After that, translations have access to the new terminology.
Implementations§
Source§impl ImportTerminologyFluentBuilder
impl ImportTerminologyFluentBuilder
Sourcepub fn as_input(&self) -> &ImportTerminologyInputBuilder
pub fn as_input(&self) -> &ImportTerminologyInputBuilder
Access the ImportTerminology as a reference.
Sourcepub async fn send(
self,
) -> Result<ImportTerminologyOutput, SdkError<ImportTerminologyError, HttpResponse>>
pub async fn send( self, ) -> Result<ImportTerminologyOutput, SdkError<ImportTerminologyError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ImportTerminologyOutput, ImportTerminologyError, Self>
pub fn customize( self, ) -> CustomizableOperation<ImportTerminologyOutput, ImportTerminologyError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
The name of the custom terminology being imported.
Sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
The name of the custom terminology being imported.
Sourcepub fn merge_strategy(self, input: MergeStrategy) -> Self
pub fn merge_strategy(self, input: MergeStrategy) -> Self
The merge strategy of the custom terminology being imported. Currently, only the OVERWRITE merge strategy is supported. In this case, the imported terminology will overwrite an existing terminology of the same name.
Sourcepub fn set_merge_strategy(self, input: Option<MergeStrategy>) -> Self
pub fn set_merge_strategy(self, input: Option<MergeStrategy>) -> Self
The merge strategy of the custom terminology being imported. Currently, only the OVERWRITE merge strategy is supported. In this case, the imported terminology will overwrite an existing terminology of the same name.
Sourcepub fn get_merge_strategy(&self) -> &Option<MergeStrategy>
pub fn get_merge_strategy(&self) -> &Option<MergeStrategy>
The merge strategy of the custom terminology being imported. Currently, only the OVERWRITE merge strategy is supported. In this case, the imported terminology will overwrite an existing terminology of the same name.
Sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
The description of the custom terminology being imported.
Sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
The description of the custom terminology being imported.
Sourcepub fn get_description(&self) -> &Option<String>
pub fn get_description(&self) -> &Option<String>
The description of the custom terminology being imported.
Sourcepub fn terminology_data(self, input: TerminologyData) -> Self
pub fn terminology_data(self, input: TerminologyData) -> Self
The terminology data for the custom terminology being imported.
Sourcepub fn set_terminology_data(self, input: Option<TerminologyData>) -> Self
pub fn set_terminology_data(self, input: Option<TerminologyData>) -> Self
The terminology data for the custom terminology being imported.
Sourcepub fn get_terminology_data(&self) -> &Option<TerminologyData>
pub fn get_terminology_data(&self) -> &Option<TerminologyData>
The terminology data for the custom terminology being imported.
Sourcepub fn encryption_key(self, input: EncryptionKey) -> Self
pub fn encryption_key(self, input: EncryptionKey) -> Self
The encryption key for the custom terminology being imported.
Sourcepub fn set_encryption_key(self, input: Option<EncryptionKey>) -> Self
pub fn set_encryption_key(self, input: Option<EncryptionKey>) -> Self
The encryption key for the custom terminology being imported.
Sourcepub fn get_encryption_key(&self) -> &Option<EncryptionKey>
pub fn get_encryption_key(&self) -> &Option<EncryptionKey>
The encryption key for the custom terminology being imported.
Appends an item to Tags.
To override the contents of this collection use set_tags.
Tags to be associated with this resource. A tag is a key-value pair that adds metadata to a resource. Each tag key for the resource must be unique. For more information, see Tagging your resources.
Tags to be associated with this resource. A tag is a key-value pair that adds metadata to a resource. Each tag key for the resource must be unique. For more information, see Tagging your resources.
Tags to be associated with this resource. A tag is a key-value pair that adds metadata to a resource. Each tag key for the resource must be unique. For more information, see Tagging your resources.
Trait Implementations§
Source§impl Clone for ImportTerminologyFluentBuilder
impl Clone for ImportTerminologyFluentBuilder
Source§fn clone(&self) -> ImportTerminologyFluentBuilder
fn clone(&self) -> ImportTerminologyFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ImportTerminologyFluentBuilder
impl !RefUnwindSafe for ImportTerminologyFluentBuilder
impl Send for ImportTerminologyFluentBuilder
impl Sync for ImportTerminologyFluentBuilder
impl Unpin for ImportTerminologyFluentBuilder
impl !UnwindSafe for ImportTerminologyFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);