Struct aws_sdk_transfer::client::fluent_builders::UpdateServer

pub struct UpdateServer<C = DynConnector, M = DefaultMiddleware, R = Standard> { /* fields omitted */ }

Fluent builder constructing a request to UpdateServer.

Updates the file transfer protocol-enabled server's properties after that server has been created.

The UpdateServer call returns the ServerId of the server you updated.

Implementations

impl<C, M, R> UpdateServer<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(
    self
) -> Result<UpdateServerOutput, SdkError<UpdateServerError>> where
    R::Policy: SmithyRetryPolicy<UpdateServerInputOperationOutputAlias, UpdateServerOutput, UpdateServerError, UpdateServerInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn certificate(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the Amazon Web ServicesCertificate Manager (ACM) certificate. Required when Protocols is set to FTPS.

To request a new public certificate, see Request a public certificate in the Amazon Web ServicesCertificate Manager User Guide.

To import an existing certificate into ACM, see Importing certificates into ACM in the Amazon Web ServicesCertificate Manager User Guide.

To request a private certificate to use FTPS through private IP addresses, see Request a private certificate in the Amazon Web ServicesCertificate Manager User Guide.

Certificates with the following cryptographic algorithms and key sizes are supported:

• 2048-bit RSA (RSA_2048)

• 4096-bit RSA (RSA_4096)

• Elliptic Prime Curve 256 bit (EC_prime256v1)

• Elliptic Prime Curve 384 bit (EC_secp384r1)

• Elliptic Prime Curve 521 bit (EC_secp521r1)

The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP address specified and information about the issuer.

pub fn set_certificate(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the Amazon Web ServicesCertificate Manager (ACM) certificate. Required when Protocols is set to FTPS.

To request a new public certificate, see Request a public certificate in the Amazon Web ServicesCertificate Manager User Guide.

To import an existing certificate into ACM, see Importing certificates into ACM in the Amazon Web ServicesCertificate Manager User Guide.

To request a private certificate to use FTPS through private IP addresses, see Request a private certificate in the Amazon Web ServicesCertificate Manager User Guide.

Certificates with the following cryptographic algorithms and key sizes are supported:

• 2048-bit RSA (RSA_2048)

• 4096-bit RSA (RSA_4096)

• Elliptic Prime Curve 256 bit (EC_prime256v1)

• Elliptic Prime Curve 384 bit (EC_secp384r1)

• Elliptic Prime Curve 521 bit (EC_secp521r1)

The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP address specified and information about the issuer.

pub fn protocol_details(self, input: ProtocolDetails) -> Self

The protocol settings that are configured for your server.

Use the PassiveIp parameter to indicate passive mode (for FTP and FTPS protocols). Enter a single dotted-quad IPv4 address, such as the external IP address of a firewall, router, or load balancer.

Use the TlsSessionResumptionMode parameter to determine whether or not your Transfer server resumes recent, negotiated sessions through a unique session ID.

pub fn set_protocol_details(self, input: Option<ProtocolDetails>) -> Self

The protocol settings that are configured for your server.

Use the PassiveIp parameter to indicate passive mode (for FTP and FTPS protocols). Enter a single dotted-quad IPv4 address, such as the external IP address of a firewall, router, or load balancer.

Use the TlsSessionResumptionMode parameter to determine whether or not your Transfer server resumes recent, negotiated sessions through a unique session ID.

pub fn endpoint_details(self, input: EndpointDetails) -> Self

The virtual private cloud (VPC) endpoint settings that are configured for your server. When you host your endpoint within your VPC, you can make it accessible only to resources within your VPC, or you can attach Elastic IP addresses and make it accessible to clients over the internet. Your VPC's default security groups are automatically assigned to your endpoint.

pub fn set_endpoint_details(self, input: Option<EndpointDetails>) -> Self

The virtual private cloud (VPC) endpoint settings that are configured for your server. When you host your endpoint within your VPC, you can make it accessible only to resources within your VPC, or you can attach Elastic IP addresses and make it accessible to clients over the internet. Your VPC's default security groups are automatically assigned to your endpoint.

pub fn endpoint_type(self, input: EndpointType) -> Self

The type of endpoint that you want your server to use. You can choose to make your server's endpoint publicly accessible (PUBLIC) or host it inside your VPC. With an endpoint that is hosted in a VPC, you can restrict access to your server and resources only within your VPC or choose to make it internet facing by attaching Elastic IP addresses directly to it.

After May 19, 2021, you won't be able to create a server using EndpointType=VPC_ENDPOINT in your Amazon Web Servicesaccount if your account hasn't already done so before May 19, 2021. If you have already created servers with EndpointType=VPC_ENDPOINT in your Amazon Web Servicesaccount on or before May 19, 2021, you will not be affected. After this date, use EndpointType=VPC.

For more information, see https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.

It is recommended that you use VPC as the EndpointType. With this endpoint type, you have the option to directly associate up to three Elastic IPv4 addresses (BYO IP included) with your server's endpoint and use VPC security groups to restrict traffic by the client's public IP address. This is not possible with EndpointType set to VPC_ENDPOINT.

pub fn set_endpoint_type(self, input: Option<EndpointType>) -> Self

The type of endpoint that you want your server to use. You can choose to make your server's endpoint publicly accessible (PUBLIC) or host it inside your VPC. With an endpoint that is hosted in a VPC, you can restrict access to your server and resources only within your VPC or choose to make it internet facing by attaching Elastic IP addresses directly to it.

After May 19, 2021, you won't be able to create a server using EndpointType=VPC_ENDPOINT in your Amazon Web Servicesaccount if your account hasn't already done so before May 19, 2021. If you have already created servers with EndpointType=VPC_ENDPOINT in your Amazon Web Servicesaccount on or before May 19, 2021, you will not be affected. After this date, use EndpointType=VPC.

For more information, see https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.

It is recommended that you use VPC as the EndpointType. With this endpoint type, you have the option to directly associate up to three Elastic IPv4 addresses (BYO IP included) with your server's endpoint and use VPC security groups to restrict traffic by the client's public IP address. This is not possible with EndpointType set to VPC_ENDPOINT.

pub fn host_key(self, input: impl Into<String>) -> Self

The RSA private key as generated by ssh-keygen -N "" -m PEM -f my-new-server-key.

If you aren't planning to migrate existing users from an existing server to a new server, don't update the host key. Accidentally changing a server's host key can be disruptive.

For more information, see Change the host key for your SFTP-enabled server in the Amazon Web ServicesTransfer Family User Guide.

pub fn set_host_key(self, input: Option<String>) -> Self

The RSA private key as generated by ssh-keygen -N "" -m PEM -f my-new-server-key.

If you aren't planning to migrate existing users from an existing server to a new server, don't update the host key. Accidentally changing a server's host key can be disruptive.

For more information, see Change the host key for your SFTP-enabled server in the Amazon Web ServicesTransfer Family User Guide.

pub fn identity_provider_details(self, input: IdentityProviderDetails) -> Self

An array containing all of the information required to call a customer's authentication API method.

pub fn set_identity_provider_details(
    self,
    input: Option<IdentityProviderDetails>
) -> Self

An array containing all of the information required to call a customer's authentication API method.

pub fn logging_role(self, input: impl Into<String>) -> Self

Specifies the Amazon Resource Name (ARN) of the Amazon Web Services Identity and Access Management (IAM) role that allows a server to turn on Amazon CloudWatch logging for Amazon S3 or Amazon EFS events. When set, user activity can be viewed in your CloudWatch logs.

pub fn set_logging_role(self, input: Option<String>) -> Self

Specifies the Amazon Resource Name (ARN) of the Amazon Web Services Identity and Access Management (IAM) role that allows a server to turn on Amazon CloudWatch logging for Amazon S3 or Amazon EFS events. When set, user activity can be viewed in your CloudWatch logs.

pub fn protocols(self, input: Protocol) -> Self

Appends an item to Protocols.

To override the contents of this collection use set_protocols.

Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:

• Secure Shell (SSH) File Transfer Protocol (SFTP): File transfer over SSH

• File Transfer Protocol Secure (FTPS): File transfer with TLS encryption

• File Transfer Protocol (FTP): Unencrypted file transfer

If you select FTPS, you must choose a certificate stored in Amazon Web ServicesCertificate Manager (ACM) which will be used to identify your server when clients connect to it over FTPS.

If Protocol includes either FTP or FTPS, then the EndpointType must be VPC and the IdentityProviderType must be AWS_DIRECTORY_SERVICE or API_GATEWAY.

If Protocol includes FTP, then AddressAllocationIds cannot be associated.

If Protocol is set only to SFTP, the EndpointType can be set to PUBLIC and the IdentityProviderType can be set to SERVICE_MANAGED.

pub fn set_protocols(self, input: Option<Vec<Protocol>>) -> Self

Specifies the file transfer protocol or protocols over which your file transfer protocol client can connect to your server's endpoint. The available protocols are:

• Secure Shell (SSH) File Transfer Protocol (SFTP): File transfer over SSH

• File Transfer Protocol Secure (FTPS): File transfer with TLS encryption

• File Transfer Protocol (FTP): Unencrypted file transfer

If you select FTPS, you must choose a certificate stored in Amazon Web ServicesCertificate Manager (ACM) which will be used to identify your server when clients connect to it over FTPS.

If Protocol includes either FTP or FTPS, then the EndpointType must be VPC and the IdentityProviderType must be AWS_DIRECTORY_SERVICE or API_GATEWAY.

If Protocol includes FTP, then AddressAllocationIds cannot be associated.

If Protocol is set only to SFTP, the EndpointType can be set to PUBLIC and the IdentityProviderType can be set to SERVICE_MANAGED.

pub fn security_policy_name(self, input: impl Into<String>) -> Self

Specifies the name of the security policy that is attached to the server.

pub fn set_security_policy_name(self, input: Option<String>) -> Self

Specifies the name of the security policy that is attached to the server.

pub fn server_id(self, input: impl Into<String>) -> Self

A system-assigned unique identifier for a server instance that the user account is assigned to.

pub fn set_server_id(self, input: Option<String>) -> Self

A system-assigned unique identifier for a server instance that the user account is assigned to.

pub fn workflow_details(self, input: WorkflowDetails) -> Self

Specifies the workflow ID for the workflow to assign and the execution role used for executing the workflow.

pub fn set_workflow_details(self, input: Option<WorkflowDetails>) -> Self

Specifies the workflow ID for the workflow to assign and the execution role used for executing the workflow.

Trait Implementations

impl<C: Clone, M: Clone, R: Clone> Clone for UpdateServer<C, M, R>

fn clone(&self) -> UpdateServer<C, M, R>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for UpdateServer<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.