aws_sdk_transcribe::operation::start_transcription_job

Struct StartTranscriptionJobInput

Source 
#[non_exhaustive]
pub struct StartTranscriptionJobInput {
Show 20 fields
    pub transcription_job_name: Option<String>,
    pub language_code: Option<LanguageCode>,
    pub media_sample_rate_hertz: Option<i32>,
    pub media_format: Option<MediaFormat>,
    pub media: Option<Media>,
    pub output_bucket_name: Option<String>,
    pub output_key: Option<String>,
    pub output_encryption_kms_key_id: Option<String>,
    pub kms_encryption_context: Option<HashMap<String, String>>,
    pub settings: Option<Settings>,
    pub model_settings: Option<ModelSettings>,
    pub job_execution_settings: Option<JobExecutionSettings>,
    pub content_redaction: Option<ContentRedaction>,
    pub identify_language: Option<bool>,
    pub identify_multiple_languages: Option<bool>,
    pub language_options: Option<Vec<LanguageCode>>,
    pub subtitles: Option<Subtitles>,
    pub tags: Option<Vec<Tag>>,
    pub language_id_settings: Option<HashMap<LanguageCode, LanguageIdSettings>>,
    pub toxicity_detection: Option<Vec<ToxicityDetectionSettings>>,

}

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive
Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.
§transcription_job_name: Option<String>

A unique name, chosen by you, for your transcription job. The name that you specify is also used as the default name of your transcription output file. If you want to specify a different name for your transcription output, use the OutputKey parameter.

This name is case sensitive, cannot contain spaces, and must be unique within an Amazon Web Services account. If you try to create a new job with the same name as an existing job, you get a ConflictException error.

§language_code: Option<LanguageCode>

The language code that represents the language spoken in the input media file.

If you're unsure of the language spoken in your media file, consider using IdentifyLanguage or IdentifyMultipleLanguages to enable automatic language identification.

Note that you must include one of LanguageCode, IdentifyLanguage, or IdentifyMultipleLanguages in your request. If you include more than one of these parameters, your transcription job fails.

For a list of supported languages and their associated language codes, refer to the Supported languages table.

To transcribe speech in Modern Standard Arabic (ar-SA) in Amazon Web Services GovCloud (US) (US-West, us-gov-west-1), Amazon Web Services GovCloud (US) (US-East, us-gov-east-1), Canada (Calgary, ca-west-1) and Africa (Cape Town, af-south-1), your media file must be encoded at a sample rate of 16,000 Hz or higher.

§media_sample_rate_hertz: Option<i32>

The sample rate, in hertz, of the audio track in your input media file.

If you do not specify the media sample rate, Amazon Transcribe determines it for you. If you specify the sample rate, it must match the rate detected by Amazon Transcribe. If there's a mismatch between the value that you specify and the value detected, your job fails. In most cases, you can omit MediaSampleRateHertz and let Amazon Transcribe determine the sample rate.

§media_format: Option<MediaFormat>

Specify the format of your input media file.

§media: Option<Media>

Describes the Amazon S3 location of the media file you want to use in your request.

§output_bucket_name: Option<String>

The name of the Amazon S3 bucket where you want your transcription output stored. Do not include the S3:// prefix of the specified bucket.

If you want your output to go to a sub-folder of this bucket, specify it using the OutputKey parameter; OutputBucketName only accepts the name of a bucket.

For example, if you want your output stored in S3://DOC-EXAMPLE-BUCKET, set OutputBucketName to DOC-EXAMPLE-BUCKET. However, if you want your output stored in S3://DOC-EXAMPLE-BUCKET/test-files/, set OutputBucketName to DOC-EXAMPLE-BUCKET and OutputKey to test-files/.

Note that Amazon Transcribe must have permission to use the specified location. You can change Amazon S3 permissions using the Amazon Web Services Management Console. See also Permissions Required for IAM User Roles.

If you do not specify OutputBucketName, your transcript is placed in a service-managed Amazon S3 bucket and you are provided with a URI to access your transcript.

§output_key: Option<String>

Use in combination with OutputBucketName to specify the output location of your transcript and, optionally, a unique name for your output file. The default name for your transcription output is the same as the name you specified for your transcription job (TranscriptionJobName).

Here are some examples of how you can use OutputKey:

  • If you specify 'DOC-EXAMPLE-BUCKET' as the OutputBucketName and 'my-transcript.json' as the OutputKey, your transcription output path is s3://DOC-EXAMPLE-BUCKET/my-transcript.json.

  • If you specify 'my-first-transcription' as the TranscriptionJobName, 'DOC-EXAMPLE-BUCKET' as the OutputBucketName, and 'my-transcript' as the OutputKey, your transcription output path is s3://DOC-EXAMPLE-BUCKET/my-transcript/my-first-transcription.json.

  • If you specify 'DOC-EXAMPLE-BUCKET' as the OutputBucketName and 'test-files/my-transcript.json' as the OutputKey, your transcription output path is s3://DOC-EXAMPLE-BUCKET/test-files/my-transcript.json.

  • If you specify 'my-first-transcription' as the TranscriptionJobName, 'DOC-EXAMPLE-BUCKET' as the OutputBucketName, and 'test-files/my-transcript' as the OutputKey, your transcription output path is s3://DOC-EXAMPLE-BUCKET/test-files/my-transcript/my-first-transcription.json.

If you specify the name of an Amazon S3 bucket sub-folder that doesn't exist, one is created for you.

§output_encryption_kms_key_id: Option<String>

The KMS key you want to use to encrypt your transcription output.

If using a key located in the current Amazon Web Services account, you can specify your KMS key in one of four ways:

  1. Use the KMS key ID itself. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

  2. Use an alias for the KMS key ID. For example, alias/ExampleAlias.

  3. Use the Amazon Resource Name (ARN) for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

  4. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If using a key located in a different Amazon Web Services account than the current Amazon Web Services account, you can specify your KMS key in one of two ways:

  1. Use the ARN for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

  2. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If you do not specify an encryption key, your output is encrypted with the default Amazon S3 key (SSE-S3).

If you specify a KMS key to encrypt your output, you must also specify an output location using the OutputLocation parameter.

Note that the role making the request must have permission to use the specified KMS key.

§kms_encryption_context: Option<HashMap<String, String>>

A map of plain text, non-secret key:value pairs, known as encryption context pairs, that provide an added layer of security for your data. For more information, see KMS encryption context and Asymmetric keys in KMS.

§settings: Option<Settings>

Specify additional optional settings in your request, including channel identification, alternative transcriptions, speaker partitioning. You can use that to apply custom vocabularies and vocabulary filters.

If you want to include a custom vocabulary or a custom vocabulary filter (or both) with your request but do not want to use automatic language identification, use Settings with the VocabularyName or VocabularyFilterName (or both) sub-parameter.

If you're using automatic language identification with your request and want to include a custom language model, a custom vocabulary, or a custom vocabulary filter, use instead the parameter with the LanguageModelName, VocabularyName or VocabularyFilterName sub-parameters.

§model_settings: Option<ModelSettings>

Specify the custom language model you want to include with your transcription job. If you include ModelSettings in your request, you must include the LanguageModelName sub-parameter.

For more information, see Custom language models.

§job_execution_settings: Option<JobExecutionSettings>

Makes it possible to control how your transcription job is processed. Currently, the only JobExecutionSettings modification you can choose is enabling job queueing using the AllowDeferredExecution sub-parameter.

If you include JobExecutionSettings in your request, you must also include the sub-parameters: AllowDeferredExecution and DataAccessRoleArn.

§content_redaction: Option<ContentRedaction>

Makes it possible to redact or flag specified personally identifiable information (PII) in your transcript. If you use ContentRedaction, you must also include the sub-parameters: RedactionOutput and RedactionType. You can optionally include PiiEntityTypes to choose which types of PII you want to redact. If you do not include PiiEntityTypes in your request, all PII is redacted.

§identify_language: Option<bool>

Enables automatic language identification in your transcription job request. Use this parameter if your media file contains only one language. If your media contains multiple languages, use IdentifyMultipleLanguages instead.

If you include IdentifyLanguage, you can optionally include a list of language codes, using LanguageOptions, that you think may be present in your media file. Including LanguageOptions restricts IdentifyLanguage to only the language options that you specify, which can improve transcription accuracy.

If you want to apply a custom language model, a custom vocabulary, or a custom vocabulary filter to your automatic language identification request, include LanguageIdSettings with the relevant sub-parameters (VocabularyName, LanguageModelName, and VocabularyFilterName). If you include LanguageIdSettings, also include LanguageOptions.

Note that you must include one of LanguageCode, IdentifyLanguage, or IdentifyMultipleLanguages in your request. If you include more than one of these parameters, your transcription job fails.

§identify_multiple_languages: Option<bool>

Enables automatic multi-language identification in your transcription job request. Use this parameter if your media file contains more than one language. If your media contains only one language, use IdentifyLanguage instead.

If you include IdentifyMultipleLanguages, you can optionally include a list of language codes, using LanguageOptions, that you think may be present in your media file. Including LanguageOptions restricts IdentifyLanguage to only the language options that you specify, which can improve transcription accuracy.

If you want to apply a custom vocabulary or a custom vocabulary filter to your automatic language identification request, include LanguageIdSettings with the relevant sub-parameters (VocabularyName and VocabularyFilterName). If you include LanguageIdSettings, also include LanguageOptions.

Note that you must include one of LanguageCode, IdentifyLanguage, or IdentifyMultipleLanguages in your request. If you include more than one of these parameters, your transcription job fails.

§language_options: Option<Vec<LanguageCode>>

You can specify two or more language codes that represent the languages you think may be present in your media. Including more than five is not recommended. If you're unsure what languages are present, do not include this parameter.

If you include LanguageOptions in your request, you must also include IdentifyLanguage.

For more information, refer to Supported languages.

To transcribe speech in Modern Standard Arabic (ar-SA)in Amazon Web Services GovCloud (US) (US-West, us-gov-west-1), Amazon Web Services GovCloud (US) (US-East, us-gov-east-1), in Canada (Calgary) ca-west-1 and Africa (Cape Town) af-south-1, your media file must be encoded at a sample rate of 16,000 Hz or higher.

§subtitles: Option<Subtitles>

Produces subtitle files for your input media. You can specify WebVTT (*.vtt) and SubRip (*.srt) formats.

§tags: Option<Vec<Tag>>

Adds one or more custom tags, each in the form of a key:value pair, to a new transcription job at the time you start this new job.

To learn more about using tags with Amazon Transcribe, refer to Tagging resources.

§language_id_settings: Option<HashMap<LanguageCode, LanguageIdSettings>>

If using automatic language identification in your request and you want to apply a custom language model, a custom vocabulary, or a custom vocabulary filter, include LanguageIdSettings with the relevant sub-parameters (VocabularyName, LanguageModelName, and VocabularyFilterName). Note that multi-language identification (IdentifyMultipleLanguages) doesn't support custom language models.

LanguageIdSettings supports two to five language codes. Each language code you include can have an associated custom language model, custom vocabulary, and custom vocabulary filter. The language codes that you specify must match the languages of the associated custom language models, custom vocabularies, and custom vocabulary filters.

It's recommended that you include LanguageOptions when using LanguageIdSettings to ensure that the correct language dialect is identified. For example, if you specify a custom vocabulary that is in en-US but Amazon Transcribe determines that the language spoken in your media is en-AU, your custom vocabulary is not applied to your transcription. If you include LanguageOptions and include en-US as the only English language dialect, your custom vocabulary is applied to your transcription.

If you want to include a custom language model with your request but do not want to use automatic language identification, use instead the parameter with the LanguageModelName sub-parameter. If you want to include a custom vocabulary or a custom vocabulary filter (or both) with your request but do not want to use automatic language identification, use instead the parameter with the VocabularyName or VocabularyFilterName (or both) sub-parameter.

§toxicity_detection: Option<Vec<ToxicityDetectionSettings>>

Enables toxic speech detection in your transcript. If you include ToxicityDetection in your request, you must also include ToxicityCategories.

For information on the types of toxic speech Amazon Transcribe can detect, see Detecting toxic speech.

Implementations§

Source§

impl StartTranscriptionJobInput

Source

pub fn transcription_job_name(&self) -> Option<&str>

A unique name, chosen by you, for your transcription job. The name that you specify is also used as the default name of your transcription output file. If you want to specify a different name for your transcription output, use the OutputKey parameter.

This name is case sensitive, cannot contain spaces, and must be unique within an Amazon Web Services account. If you try to create a new job with the same name as an existing job, you get a ConflictException error.

Source

pub fn language_code(&self) -> Option<&LanguageCode>

The language code that represents the language spoken in the input media file.

If you're unsure of the language spoken in your media file, consider using IdentifyLanguage or IdentifyMultipleLanguages to enable automatic language identification.

Note that you must include one of LanguageCode, IdentifyLanguage, or IdentifyMultipleLanguages in your request. If you include more than one of these parameters, your transcription job fails.

For a list of supported languages and their associated language codes, refer to the Supported languages table.

To transcribe speech in Modern Standard Arabic (ar-SA) in Amazon Web Services GovCloud (US) (US-West, us-gov-west-1), Amazon Web Services GovCloud (US) (US-East, us-gov-east-1), Canada (Calgary, ca-west-1) and Africa (Cape Town, af-south-1), your media file must be encoded at a sample rate of 16,000 Hz or higher.

Source

pub fn media_sample_rate_hertz(&self) -> Option<i32>

The sample rate, in hertz, of the audio track in your input media file.

If you do not specify the media sample rate, Amazon Transcribe determines it for you. If you specify the sample rate, it must match the rate detected by Amazon Transcribe. If there's a mismatch between the value that you specify and the value detected, your job fails. In most cases, you can omit MediaSampleRateHertz and let Amazon Transcribe determine the sample rate.

Source

pub fn media_format(&self) -> Option<&MediaFormat>

Specify the format of your input media file.

Source

pub fn media(&self) -> Option<&Media>

Describes the Amazon S3 location of the media file you want to use in your request.

Source

pub fn output_bucket_name(&self) -> Option<&str>

The name of the Amazon S3 bucket where you want your transcription output stored. Do not include the S3:// prefix of the specified bucket.

If you want your output to go to a sub-folder of this bucket, specify it using the OutputKey parameter; OutputBucketName only accepts the name of a bucket.

For example, if you want your output stored in S3://DOC-EXAMPLE-BUCKET, set OutputBucketName to DOC-EXAMPLE-BUCKET. However, if you want your output stored in S3://DOC-EXAMPLE-BUCKET/test-files/, set OutputBucketName to DOC-EXAMPLE-BUCKET and OutputKey to test-files/.

Note that Amazon Transcribe must have permission to use the specified location. You can change Amazon S3 permissions using the Amazon Web Services Management Console. See also Permissions Required for IAM User Roles.

If you do not specify OutputBucketName, your transcript is placed in a service-managed Amazon S3 bucket and you are provided with a URI to access your transcript.

Source

pub fn output_key(&self) -> Option<&str>

Use in combination with OutputBucketName to specify the output location of your transcript and, optionally, a unique name for your output file. The default name for your transcription output is the same as the name you specified for your transcription job (TranscriptionJobName).

Here are some examples of how you can use OutputKey:

  • If you specify 'DOC-EXAMPLE-BUCKET' as the OutputBucketName and 'my-transcript.json' as the OutputKey, your transcription output path is s3://DOC-EXAMPLE-BUCKET/my-transcript.json.

  • If you specify 'my-first-transcription' as the TranscriptionJobName, 'DOC-EXAMPLE-BUCKET' as the OutputBucketName, and 'my-transcript' as the OutputKey, your transcription output path is s3://DOC-EXAMPLE-BUCKET/my-transcript/my-first-transcription.json.

  • If you specify 'DOC-EXAMPLE-BUCKET' as the OutputBucketName and 'test-files/my-transcript.json' as the OutputKey, your transcription output path is s3://DOC-EXAMPLE-BUCKET/test-files/my-transcript.json.

  • If you specify 'my-first-transcription' as the TranscriptionJobName, 'DOC-EXAMPLE-BUCKET' as the OutputBucketName, and 'test-files/my-transcript' as the OutputKey, your transcription output path is s3://DOC-EXAMPLE-BUCKET/test-files/my-transcript/my-first-transcription.json.

If you specify the name of an Amazon S3 bucket sub-folder that doesn't exist, one is created for you.

Source

pub fn output_encryption_kms_key_id(&self) -> Option<&str>

The KMS key you want to use to encrypt your transcription output.

If using a key located in the current Amazon Web Services account, you can specify your KMS key in one of four ways:

  1. Use the KMS key ID itself. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

  2. Use an alias for the KMS key ID. For example, alias/ExampleAlias.

  3. Use the Amazon Resource Name (ARN) for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

  4. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If using a key located in a different Amazon Web Services account than the current Amazon Web Services account, you can specify your KMS key in one of two ways:

  1. Use the ARN for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

  2. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If you do not specify an encryption key, your output is encrypted with the default Amazon S3 key (SSE-S3).

If you specify a KMS key to encrypt your output, you must also specify an output location using the OutputLocation parameter.

Note that the role making the request must have permission to use the specified KMS key.

Source

pub fn kms_encryption_context(&self) -> Option<&HashMap<String, String>>

A map of plain text, non-secret key:value pairs, known as encryption context pairs, that provide an added layer of security for your data. For more information, see KMS encryption context and Asymmetric keys in KMS.

Source

pub fn settings(&self) -> Option<&Settings>

Specify additional optional settings in your request, including channel identification, alternative transcriptions, speaker partitioning. You can use that to apply custom vocabularies and vocabulary filters.

If you want to include a custom vocabulary or a custom vocabulary filter (or both) with your request but do not want to use automatic language identification, use Settings with the VocabularyName or VocabularyFilterName (or both) sub-parameter.

If you're using automatic language identification with your request and want to include a custom language model, a custom vocabulary, or a custom vocabulary filter, use instead the parameter with the LanguageModelName, VocabularyName or VocabularyFilterName sub-parameters.

Source

pub fn model_settings(&self) -> Option<&ModelSettings>

Specify the custom language model you want to include with your transcription job. If you include ModelSettings in your request, you must include the LanguageModelName sub-parameter.

For more information, see Custom language models.

Source

pub fn job_execution_settings(&self) -> Option<&JobExecutionSettings>

Makes it possible to control how your transcription job is processed. Currently, the only JobExecutionSettings modification you can choose is enabling job queueing using the AllowDeferredExecution sub-parameter.

If you include JobExecutionSettings in your request, you must also include the sub-parameters: AllowDeferredExecution and DataAccessRoleArn.

Source

pub fn content_redaction(&self) -> Option<&ContentRedaction>

Makes it possible to redact or flag specified personally identifiable information (PII) in your transcript. If you use ContentRedaction, you must also include the sub-parameters: RedactionOutput and RedactionType. You can optionally include PiiEntityTypes to choose which types of PII you want to redact. If you do not include PiiEntityTypes in your request, all PII is redacted.

Source

pub fn identify_language(&self) -> Option<bool>

Enables automatic language identification in your transcription job request. Use this parameter if your media file contains only one language. If your media contains multiple languages, use IdentifyMultipleLanguages instead.

If you include IdentifyLanguage, you can optionally include a list of language codes, using LanguageOptions, that you think may be present in your media file. Including LanguageOptions restricts IdentifyLanguage to only the language options that you specify, which can improve transcription accuracy.

If you want to apply a custom language model, a custom vocabulary, or a custom vocabulary filter to your automatic language identification request, include LanguageIdSettings with the relevant sub-parameters (VocabularyName, LanguageModelName, and VocabularyFilterName). If you include LanguageIdSettings, also include LanguageOptions.

Note that you must include one of LanguageCode, IdentifyLanguage, or IdentifyMultipleLanguages in your request. If you include more than one of these parameters, your transcription job fails.

Source

pub fn identify_multiple_languages(&self) -> Option<bool>

Enables automatic multi-language identification in your transcription job request. Use this parameter if your media file contains more than one language. If your media contains only one language, use IdentifyLanguage instead.

If you include IdentifyMultipleLanguages, you can optionally include a list of language codes, using LanguageOptions, that you think may be present in your media file. Including LanguageOptions restricts IdentifyLanguage to only the language options that you specify, which can improve transcription accuracy.

If you want to apply a custom vocabulary or a custom vocabulary filter to your automatic language identification request, include LanguageIdSettings with the relevant sub-parameters (VocabularyName and VocabularyFilterName). If you include LanguageIdSettings, also include LanguageOptions.

Note that you must include one of LanguageCode, IdentifyLanguage, or IdentifyMultipleLanguages in your request. If you include more than one of these parameters, your transcription job fails.

Source

pub fn language_options(&self) -> &[LanguageCode]

You can specify two or more language codes that represent the languages you think may be present in your media. Including more than five is not recommended. If you're unsure what languages are present, do not include this parameter.

If you include LanguageOptions in your request, you must also include IdentifyLanguage.

For more information, refer to Supported languages.

To transcribe speech in Modern Standard Arabic (ar-SA)in Amazon Web Services GovCloud (US) (US-West, us-gov-west-1), Amazon Web Services GovCloud (US) (US-East, us-gov-east-1), in Canada (Calgary) ca-west-1 and Africa (Cape Town) af-south-1, your media file must be encoded at a sample rate of 16,000 Hz or higher.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .language_options.is_none().

Source

pub fn subtitles(&self) -> Option<&Subtitles>

Produces subtitle files for your input media. You can specify WebVTT (*.vtt) and SubRip (*.srt) formats.

Source

pub fn tags(&self) -> &[Tag]

Adds one or more custom tags, each in the form of a key:value pair, to a new transcription job at the time you start this new job.

To learn more about using tags with Amazon Transcribe, refer to Tagging resources.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().

Source

pub fn language_id_settings( &self, ) -> Option<&HashMap<LanguageCode, LanguageIdSettings>>

If using automatic language identification in your request and you want to apply a custom language model, a custom vocabulary, or a custom vocabulary filter, include LanguageIdSettings with the relevant sub-parameters (VocabularyName, LanguageModelName, and VocabularyFilterName). Note that multi-language identification (IdentifyMultipleLanguages) doesn't support custom language models.

LanguageIdSettings supports two to five language codes. Each language code you include can have an associated custom language model, custom vocabulary, and custom vocabulary filter. The language codes that you specify must match the languages of the associated custom language models, custom vocabularies, and custom vocabulary filters.

It's recommended that you include LanguageOptions when using LanguageIdSettings to ensure that the correct language dialect is identified. For example, if you specify a custom vocabulary that is in en-US but Amazon Transcribe determines that the language spoken in your media is en-AU, your custom vocabulary is not applied to your transcription. If you include LanguageOptions and include en-US as the only English language dialect, your custom vocabulary is applied to your transcription.

If you want to include a custom language model with your request but do not want to use automatic language identification, use instead the parameter with the LanguageModelName sub-parameter. If you want to include a custom vocabulary or a custom vocabulary filter (or both) with your request but do not want to use automatic language identification, use instead the parameter with the VocabularyName or VocabularyFilterName (or both) sub-parameter.

Source

pub fn toxicity_detection(&self) -> &[ToxicityDetectionSettings]

Enables toxic speech detection in your transcript. If you include ToxicityDetection in your request, you must also include ToxicityCategories.

For information on the types of toxic speech Amazon Transcribe can detect, see Detecting toxic speech.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .toxicity_detection.is_none().

Source§

impl StartTranscriptionJobInput

Source

pub fn builder() -> StartTranscriptionJobInputBuilder

Creates a new builder-style object to manufacture StartTranscriptionJobInput.

Trait Implementations§

Source§

impl Clone for StartTranscriptionJobInput

Source§

fn clone(&self) -> StartTranscriptionJobInput

Returns a duplicate of the value. Read more
1.0.0 · Source§

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for StartTranscriptionJobInput

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl PartialEq for StartTranscriptionJobInput

Source§

fn eq(&self, other: &StartTranscriptionJobInput) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for StartTranscriptionJobInput

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,