Struct aws_sdk_transcribe::operation::start_call_analytics_job::builders::StartCallAnalyticsJobInputBuilder

#[non_exhaustive]
pub struct StartCallAnalyticsJobInputBuilder { /* private fields */ }

A builder for StartCallAnalyticsJobInput.

Implementations

impl StartCallAnalyticsJobInputBuilder

pub fn call_analytics_job_name(self, input: impl Into<String>) -> Self

A unique name, chosen by you, for your Call Analytics job.

This name is case sensitive, cannot contain spaces, and must be unique within an Amazon Web Services account. If you try to create a new job with the same name as an existing job, you get a ConflictException error.

This field is required.

pub fn set_call_analytics_job_name(self, input: Option<String>) -> Self

A unique name, chosen by you, for your Call Analytics job.

This name is case sensitive, cannot contain spaces, and must be unique within an Amazon Web Services account. If you try to create a new job with the same name as an existing job, you get a ConflictException error.

pub fn get_call_analytics_job_name(&self) -> &Option<String>

A unique name, chosen by you, for your Call Analytics job.

This name is case sensitive, cannot contain spaces, and must be unique within an Amazon Web Services account. If you try to create a new job with the same name as an existing job, you get a ConflictException error.

pub fn media(self, input: Media) -> Self

Describes the Amazon S3 location of the media file you want to use in your Call Analytics request.

This field is required.

pub fn set_media(self, input: Option<Media>) -> Self

Describes the Amazon S3 location of the media file you want to use in your Call Analytics request.

pub fn get_media(&self) -> &Option<Media>

Describes the Amazon S3 location of the media file you want to use in your Call Analytics request.

pub fn output_location(self, input: impl Into<String>) -> Self

The Amazon S3 location where you want your Call Analytics transcription output stored. You can use any of the following formats to specify the output location:

1. s3://DOC-EXAMPLE-BUCKET

2. s3://DOC-EXAMPLE-BUCKET/my-output-folder/

3. s3://DOC-EXAMPLE-BUCKET/my-output-folder/my-call-analytics-job.json

Unless you specify a file name (option 3), the name of your output file has a default value that matches the name you specified for your transcription job using the CallAnalyticsJobName parameter.

You can specify a KMS key to encrypt your output using the OutputEncryptionKMSKeyId parameter. If you do not specify a KMS key, Amazon Transcribe uses the default Amazon S3 key for server-side encryption.

If you do not specify OutputLocation, your transcript is placed in a service-managed Amazon S3 bucket and you are provided with a URI to access your transcript.

pub fn set_output_location(self, input: Option<String>) -> Self

The Amazon S3 location where you want your Call Analytics transcription output stored. You can use any of the following formats to specify the output location:

1. s3://DOC-EXAMPLE-BUCKET

2. s3://DOC-EXAMPLE-BUCKET/my-output-folder/

3. s3://DOC-EXAMPLE-BUCKET/my-output-folder/my-call-analytics-job.json

Unless you specify a file name (option 3), the name of your output file has a default value that matches the name you specified for your transcription job using the CallAnalyticsJobName parameter.

You can specify a KMS key to encrypt your output using the OutputEncryptionKMSKeyId parameter. If you do not specify a KMS key, Amazon Transcribe uses the default Amazon S3 key for server-side encryption.

If you do not specify OutputLocation, your transcript is placed in a service-managed Amazon S3 bucket and you are provided with a URI to access your transcript.

pub fn get_output_location(&self) -> &Option<String>

The Amazon S3 location where you want your Call Analytics transcription output stored. You can use any of the following formats to specify the output location:

1. s3://DOC-EXAMPLE-BUCKET

2. s3://DOC-EXAMPLE-BUCKET/my-output-folder/

3. s3://DOC-EXAMPLE-BUCKET/my-output-folder/my-call-analytics-job.json

Unless you specify a file name (option 3), the name of your output file has a default value that matches the name you specified for your transcription job using the CallAnalyticsJobName parameter.

You can specify a KMS key to encrypt your output using the OutputEncryptionKMSKeyId parameter. If you do not specify a KMS key, Amazon Transcribe uses the default Amazon S3 key for server-side encryption.

If you do not specify OutputLocation, your transcript is placed in a service-managed Amazon S3 bucket and you are provided with a URI to access your transcript.

pub fn output_encryption_kms_key_id(self, input: impl Into<String>) -> Self

The KMS key you want to use to encrypt your Call Analytics output.

If using a key located in the current Amazon Web Services account, you can specify your KMS key in one of four ways:

1. Use the KMS key ID itself. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

2. Use an alias for the KMS key ID. For example, alias/ExampleAlias.

3. Use the Amazon Resource Name (ARN) for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

4. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If using a key located in a different Amazon Web Services account than the current Amazon Web Services account, you can specify your KMS key in one of two ways:

1. Use the ARN for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

2. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If you do not specify an encryption key, your output is encrypted with the default Amazon S3 key (SSE-S3).

If you specify a KMS key to encrypt your output, you must also specify an output location using the OutputLocation parameter.

Note that the role making the request must have permission to use the specified KMS key.

pub fn set_output_encryption_kms_key_id(self, input: Option<String>) -> Self

The KMS key you want to use to encrypt your Call Analytics output.

If using a key located in the current Amazon Web Services account, you can specify your KMS key in one of four ways:

1. Use the KMS key ID itself. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

2. Use an alias for the KMS key ID. For example, alias/ExampleAlias.

3. Use the Amazon Resource Name (ARN) for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

4. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If using a key located in a different Amazon Web Services account than the current Amazon Web Services account, you can specify your KMS key in one of two ways:

1. Use the ARN for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

2. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If you do not specify an encryption key, your output is encrypted with the default Amazon S3 key (SSE-S3).

If you specify a KMS key to encrypt your output, you must also specify an output location using the OutputLocation parameter.

Note that the role making the request must have permission to use the specified KMS key.

pub fn get_output_encryption_kms_key_id(&self) -> &Option<String>

The KMS key you want to use to encrypt your Call Analytics output.

If using a key located in the current Amazon Web Services account, you can specify your KMS key in one of four ways:

1. Use the KMS key ID itself. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

2. Use an alias for the KMS key ID. For example, alias/ExampleAlias.

3. Use the Amazon Resource Name (ARN) for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

4. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If using a key located in a different Amazon Web Services account than the current Amazon Web Services account, you can specify your KMS key in one of two ways:

1. Use the ARN for the KMS key ID. For example, arn:aws:kms:region:account-ID:key/1234abcd-12ab-34cd-56ef-1234567890ab.

2. Use the ARN for the KMS key alias. For example, arn:aws:kms:region:account-ID:alias/ExampleAlias.

If you do not specify an encryption key, your output is encrypted with the default Amazon S3 key (SSE-S3).

If you specify a KMS key to encrypt your output, you must also specify an output location using the OutputLocation parameter.

Note that the role making the request must have permission to use the specified KMS key.

pub fn data_access_role_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of an IAM role that has permissions to access the Amazon S3 bucket that contains your input files. If the role that you specify doesn’t have the appropriate permissions to access the specified Amazon S3 location, your request fails.

IAM role ARNs have the format arn:partition:iam::account:role/role-name-with-path. For example: arn:aws:iam::111122223333:role/Admin.

For more information, see IAM ARNs.

pub fn set_data_access_role_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of an IAM role that has permissions to access the Amazon S3 bucket that contains your input files. If the role that you specify doesn’t have the appropriate permissions to access the specified Amazon S3 location, your request fails.

IAM role ARNs have the format arn:partition:iam::account:role/role-name-with-path. For example: arn:aws:iam::111122223333:role/Admin.

For more information, see IAM ARNs.

pub fn get_data_access_role_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of an IAM role that has permissions to access the Amazon S3 bucket that contains your input files. If the role that you specify doesn’t have the appropriate permissions to access the specified Amazon S3 location, your request fails.

IAM role ARNs have the format arn:partition:iam::account:role/role-name-with-path. For example: arn:aws:iam::111122223333:role/Admin.

For more information, see IAM ARNs.

pub fn settings(self, input: CallAnalyticsJobSettings) -> Self

Specify additional optional settings in your request, including content redaction; allows you to apply custom language models, vocabulary filters, and custom vocabularies to your Call Analytics job.

pub fn set_settings(self, input: Option<CallAnalyticsJobSettings>) -> Self

Specify additional optional settings in your request, including content redaction; allows you to apply custom language models, vocabulary filters, and custom vocabularies to your Call Analytics job.

pub fn get_settings(&self) -> &Option<CallAnalyticsJobSettings>

Specify additional optional settings in your request, including content redaction; allows you to apply custom language models, vocabulary filters, and custom vocabularies to your Call Analytics job.

pub fn channel_definitions(self, input: ChannelDefinition) -> Self

Appends an item to channel_definitions.

To override the contents of this collection use set_channel_definitions.

Makes it possible to specify which speaker is on which channel. For example, if your agent is the first participant to speak, you would set ChannelId to 0 (to indicate the first channel) and ParticipantRole to AGENT (to indicate that it's the agent speaking).

pub fn set_channel_definitions( self, input: Option<Vec<ChannelDefinition>> ) -> Self

Makes it possible to specify which speaker is on which channel. For example, if your agent is the first participant to speak, you would set ChannelId to 0 (to indicate the first channel) and ParticipantRole to AGENT (to indicate that it's the agent speaking).

pub fn get_channel_definitions(&self) -> &Option<Vec<ChannelDefinition>>

Makes it possible to specify which speaker is on which channel. For example, if your agent is the first participant to speak, you would set ChannelId to 0 (to indicate the first channel) and ParticipantRole to AGENT (to indicate that it's the agent speaking).

pub fn build(self) -> Result<StartCallAnalyticsJobInput, BuildError>

Consumes the builder and constructs a StartCallAnalyticsJobInput.

impl StartCallAnalyticsJobInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<StartCallAnalyticsJobOutput, SdkError<StartCallAnalyticsJobError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for StartCallAnalyticsJobInputBuilder

fn clone(&self) -> StartCallAnalyticsJobInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for StartCallAnalyticsJobInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for StartCallAnalyticsJobInputBuilder

fn default() -> StartCallAnalyticsJobInputBuilder

Returns the “default value” for a type.

impl PartialEq for StartCallAnalyticsJobInputBuilder

fn eq(&self, other: &StartCallAnalyticsJobInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for StartCallAnalyticsJobInputBuilder