aws_sdk_timestreamquery::operation::query::builders

Struct QueryFluentBuilder

Source 
pub struct QueryFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to Query.

Query is a synchronous operation that enables you to run a query against your Amazon Timestream data.

If you enabled QueryInsights, this API also returns insights and metrics related to the query that you executed. QueryInsights helps with performance tuning of your query. For more information about QueryInsights, see Using query insights to optimize queries in Amazon Timestream.

The maximum number of Query API requests you're allowed to make with QueryInsights enabled is 1 query per second (QPS). If you exceed this query rate, it might result in throttling.

Query will time out after 60 seconds. You must update the default timeout in the SDK to support a timeout of 60 seconds. See the code sample for details.

Your query request will fail in the following cases:

  • If you submit a Query request with the same client token outside of the 5-minute idempotency window.

  • If you submit a Query request with the same client token, but change other parameters, within the 5-minute idempotency window.

  • If the size of the row (including the query metadata) exceeds 1 MB, then the query will fail with the following error message:

    Query aborted as max page response size has been exceeded by the output result row

  • If the IAM principal of the query initiator and the result reader are not the same and/or the query initiator and the result reader do not have the same query string in the query requests, the query will fail with an Invalid pagination token error.

Implementations§

Source§

impl QueryFluentBuilder

Source

pub fn as_input(&self) -> &QueryInputBuilder

Access the Query as a reference.

Source

pub async fn send( self, ) -> Result<QueryOutput, SdkError<QueryError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize(self) -> CustomizableOperation<QueryOutput, QueryError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn query_string(self, input: impl Into<String>) -> Self

The query to be run by Timestream.

Source

pub fn set_query_string(self, input: Option<String>) -> Self

The query to be run by Timestream.

Source

pub fn get_query_string(&self) -> &Option<String>

The query to be run by Timestream.

Source

pub fn client_token(self, input: impl Into<String>) -> Self

Unique, case-sensitive string of up to 64 ASCII characters specified when a Query request is made. Providing a ClientToken makes the call to Query idempotent. This means that running the same query repeatedly will produce the same result. In other words, making multiple identical Query requests has the same effect as making a single request. When using ClientToken in a query, note the following:

  • If the Query API is instantiated without a ClientToken, the Query SDK generates a ClientToken on your behalf.

  • If the Query invocation only contains the ClientToken but does not include a NextToken, that invocation of Query is assumed to be a new query run.

  • If the invocation contains NextToken, that particular invocation is assumed to be a subsequent invocation of a prior call to the Query API, and a result set is returned.

  • After 4 hours, any request with the same ClientToken is treated as a new request.

Source

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive string of up to 64 ASCII characters specified when a Query request is made. Providing a ClientToken makes the call to Query idempotent. This means that running the same query repeatedly will produce the same result. In other words, making multiple identical Query requests has the same effect as making a single request. When using ClientToken in a query, note the following:

  • If the Query API is instantiated without a ClientToken, the Query SDK generates a ClientToken on your behalf.

  • If the Query invocation only contains the ClientToken but does not include a NextToken, that invocation of Query is assumed to be a new query run.

  • If the invocation contains NextToken, that particular invocation is assumed to be a subsequent invocation of a prior call to the Query API, and a result set is returned.

  • After 4 hours, any request with the same ClientToken is treated as a new request.

Source

pub fn get_client_token(&self) -> &Option<String>

Unique, case-sensitive string of up to 64 ASCII characters specified when a Query request is made. Providing a ClientToken makes the call to Query idempotent. This means that running the same query repeatedly will produce the same result. In other words, making multiple identical Query requests has the same effect as making a single request. When using ClientToken in a query, note the following:

  • If the Query API is instantiated without a ClientToken, the Query SDK generates a ClientToken on your behalf.

  • If the Query invocation only contains the ClientToken but does not include a NextToken, that invocation of Query is assumed to be a new query run.

  • If the invocation contains NextToken, that particular invocation is assumed to be a subsequent invocation of a prior call to the Query API, and a result set is returned.

  • After 4 hours, any request with the same ClientToken is treated as a new request.

Source

pub fn next_token(self, input: impl Into<String>) -> Self

A pagination token used to return a set of results. When the Query API is invoked using NextToken, that particular invocation is assumed to be a subsequent invocation of a prior call to Query, and a result set is returned. However, if the Query invocation only contains the ClientToken, that invocation of Query is assumed to be a new query run.

Note the following when using NextToken in a query:

  • A pagination token can be used for up to five Query invocations, OR for a duration of up to 1 hour – whichever comes first.

  • Using the same NextToken will return the same set of records. To keep paginating through the result set, you must to use the most recent nextToken.

  • Suppose a Query invocation returns two NextToken values, TokenA and TokenB. If TokenB is used in a subsequent Query invocation, then TokenA is invalidated and cannot be reused.

  • To request a previous result set from a query after pagination has begun, you must re-invoke the Query API.

  • The latest NextToken should be used to paginate until null is returned, at which point a new NextToken should be used.

  • If the IAM principal of the query initiator and the result reader are not the same and/or the query initiator and the result reader do not have the same query string in the query requests, the query will fail with an Invalid pagination token error.

Source

pub fn set_next_token(self, input: Option<String>) -> Self

A pagination token used to return a set of results. When the Query API is invoked using NextToken, that particular invocation is assumed to be a subsequent invocation of a prior call to Query, and a result set is returned. However, if the Query invocation only contains the ClientToken, that invocation of Query is assumed to be a new query run.

Note the following when using NextToken in a query:

  • A pagination token can be used for up to five Query invocations, OR for a duration of up to 1 hour – whichever comes first.

  • Using the same NextToken will return the same set of records. To keep paginating through the result set, you must to use the most recent nextToken.

  • Suppose a Query invocation returns two NextToken values, TokenA and TokenB. If TokenB is used in a subsequent Query invocation, then TokenA is invalidated and cannot be reused.

  • To request a previous result set from a query after pagination has begun, you must re-invoke the Query API.

  • The latest NextToken should be used to paginate until null is returned, at which point a new NextToken should be used.

  • If the IAM principal of the query initiator and the result reader are not the same and/or the query initiator and the result reader do not have the same query string in the query requests, the query will fail with an Invalid pagination token error.

Source

pub fn get_next_token(&self) -> &Option<String>

A pagination token used to return a set of results. When the Query API is invoked using NextToken, that particular invocation is assumed to be a subsequent invocation of a prior call to Query, and a result set is returned. However, if the Query invocation only contains the ClientToken, that invocation of Query is assumed to be a new query run.

Note the following when using NextToken in a query:

  • A pagination token can be used for up to five Query invocations, OR for a duration of up to 1 hour – whichever comes first.

  • Using the same NextToken will return the same set of records. To keep paginating through the result set, you must to use the most recent nextToken.

  • Suppose a Query invocation returns two NextToken values, TokenA and TokenB. If TokenB is used in a subsequent Query invocation, then TokenA is invalidated and cannot be reused.

  • To request a previous result set from a query after pagination has begun, you must re-invoke the Query API.

  • The latest NextToken should be used to paginate until null is returned, at which point a new NextToken should be used.

  • If the IAM principal of the query initiator and the result reader are not the same and/or the query initiator and the result reader do not have the same query string in the query requests, the query will fail with an Invalid pagination token error.

Source

pub fn max_rows(self, input: i32) -> Self

The total number of rows to be returned in the Query output. The initial run of Query with a MaxRows value specified will return the result set of the query in two cases:

  • The size of the result is less than 1MB.

  • The number of rows in the result set is less than the value of maxRows.

Otherwise, the initial invocation of Query only returns a NextToken, which can then be used in subsequent calls to fetch the result set. To resume pagination, provide the NextToken value in the subsequent command.

If the row size is large (e.g. a row has many columns), Timestream may return fewer rows to keep the response size from exceeding the 1 MB limit. If MaxRows is not provided, Timestream will send the necessary number of rows to meet the 1 MB limit.

Source

pub fn set_max_rows(self, input: Option<i32>) -> Self

The total number of rows to be returned in the Query output. The initial run of Query with a MaxRows value specified will return the result set of the query in two cases:

  • The size of the result is less than 1MB.

  • The number of rows in the result set is less than the value of maxRows.

Otherwise, the initial invocation of Query only returns a NextToken, which can then be used in subsequent calls to fetch the result set. To resume pagination, provide the NextToken value in the subsequent command.

If the row size is large (e.g. a row has many columns), Timestream may return fewer rows to keep the response size from exceeding the 1 MB limit. If MaxRows is not provided, Timestream will send the necessary number of rows to meet the 1 MB limit.

Source

pub fn get_max_rows(&self) -> &Option<i32>

The total number of rows to be returned in the Query output. The initial run of Query with a MaxRows value specified will return the result set of the query in two cases:

  • The size of the result is less than 1MB.

  • The number of rows in the result set is less than the value of maxRows.

Otherwise, the initial invocation of Query only returns a NextToken, which can then be used in subsequent calls to fetch the result set. To resume pagination, provide the NextToken value in the subsequent command.

If the row size is large (e.g. a row has many columns), Timestream may return fewer rows to keep the response size from exceeding the 1 MB limit. If MaxRows is not provided, Timestream will send the necessary number of rows to meet the 1 MB limit.

Source

pub fn query_insights(self, input: QueryInsights) -> Self

Encapsulates settings for enabling QueryInsights.

Enabling QueryInsights returns insights and metrics in addition to query results for the query that you executed. You can use QueryInsights to tune your query performance.

Source

pub fn set_query_insights(self, input: Option<QueryInsights>) -> Self

Encapsulates settings for enabling QueryInsights.

Enabling QueryInsights returns insights and metrics in addition to query results for the query that you executed. You can use QueryInsights to tune your query performance.

Source

pub fn get_query_insights(&self) -> &Option<QueryInsights>

Encapsulates settings for enabling QueryInsights.

Enabling QueryInsights returns insights and metrics in addition to query results for the query that you executed. You can use QueryInsights to tune your query performance.

Trait Implementations§

Source§

impl Clone for QueryFluentBuilder

Source§

fn clone(&self) -> QueryFluentBuilder

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for QueryFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,