pub struct GetExpenseAnalysisFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to GetExpenseAnalysis
.
Gets the results for an Amazon Textract asynchronous operation that analyzes invoices and receipts. Amazon Textract finds contact information, items purchased, and vendor name, from input invoices and receipts.
You start asynchronous invoice/receipt analysis by calling StartExpenseAnalysis
, which returns a job identifier (JobId
). Upon completion of the invoice/receipt analysis, Amazon Textract publishes the completion status to the Amazon Simple Notification Service (Amazon SNS) topic. This topic must be registered in the initial call to StartExpenseAnalysis
. To get the results of the invoice/receipt analysis operation, first ensure that the status value published to the Amazon SNS topic is SUCCEEDED
. If so, call GetExpenseAnalysis
, and pass the job identifier (JobId
) from the initial call to StartExpenseAnalysis
.
Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults
, the value of NextToken
in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetExpenseAnalysis
, and populate the NextToken
request parameter with the token value that's returned from the previous call to GetExpenseAnalysis
.
For more information, see Analyzing Invoices and Receipts.
Implementations§
Source§impl GetExpenseAnalysisFluentBuilder
impl GetExpenseAnalysisFluentBuilder
Sourcepub fn as_input(&self) -> &GetExpenseAnalysisInputBuilder
pub fn as_input(&self) -> &GetExpenseAnalysisInputBuilder
Access the GetExpenseAnalysis as a reference.
Sourcepub async fn send(
self,
) -> Result<GetExpenseAnalysisOutput, SdkError<GetExpenseAnalysisError, HttpResponse>>
pub async fn send( self, ) -> Result<GetExpenseAnalysisOutput, SdkError<GetExpenseAnalysisError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<GetExpenseAnalysisOutput, GetExpenseAnalysisError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetExpenseAnalysisOutput, GetExpenseAnalysisError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn job_id(self, input: impl Into<String>) -> Self
pub fn job_id(self, input: impl Into<String>) -> Self
A unique identifier for the text detection job. The JobId
is returned from StartExpenseAnalysis
. A JobId
value is only valid for 7 days.
Sourcepub fn set_job_id(self, input: Option<String>) -> Self
pub fn set_job_id(self, input: Option<String>) -> Self
A unique identifier for the text detection job. The JobId
is returned from StartExpenseAnalysis
. A JobId
value is only valid for 7 days.
Sourcepub fn get_job_id(&self) -> &Option<String>
pub fn get_job_id(&self) -> &Option<String>
A unique identifier for the text detection job. The JobId
is returned from StartExpenseAnalysis
. A JobId
value is only valid for 7 days.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of results to return per paginated call. The largest value you can specify is 20. If you specify a value greater than 20, a maximum of 20 results is returned. The default value is 20.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of results to return per paginated call. The largest value you can specify is 20. If you specify a value greater than 20, a maximum of 20 results is returned. The default value is 20.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of results to return per paginated call. The largest value you can specify is 20. If you specify a value greater than 20, a maximum of 20 results is returned. The default value is 20.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Trait Implementations§
Source§impl Clone for GetExpenseAnalysisFluentBuilder
impl Clone for GetExpenseAnalysisFluentBuilder
Source§fn clone(&self) -> GetExpenseAnalysisFluentBuilder
fn clone(&self) -> GetExpenseAnalysisFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for GetExpenseAnalysisFluentBuilder
impl !RefUnwindSafe for GetExpenseAnalysisFluentBuilder
impl Send for GetExpenseAnalysisFluentBuilder
impl Sync for GetExpenseAnalysisFluentBuilder
impl Unpin for GetExpenseAnalysisFluentBuilder
impl !UnwindSafe for GetExpenseAnalysisFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);