pub struct GetDocumentTextDetectionFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to GetDocumentTextDetection.
Gets the results for an Amazon Textract asynchronous operation that detects text in a document. Amazon Textract can detect lines of text and the words that make up a line of text.
You start asynchronous text detection by calling StartDocumentTextDetection, which returns a job identifier (JobId). When the text detection operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartDocumentTextDetection. To get the results of the text-detection operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentTextDetection, and pass the job identifier (JobId) from the initial call to StartDocumentTextDetection.
GetDocumentTextDetection returns an array of Block objects.
Each document page has as an associated Block of type PAGE. Each PAGE Block object is the parent of LINE Block objects that represent the lines of detected text on a page. A LINE Block object is a parent for each word that makes up the line. Words are represented by Block objects of type WORD.
Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults, the value of NextToken in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetDocumentTextDetection, and populate the NextToken request parameter with the token value that's returned from the previous call to GetDocumentTextDetection.
For more information, see Document Text Detection.
Implementations§
Source§impl GetDocumentTextDetectionFluentBuilder
impl GetDocumentTextDetectionFluentBuilder
Sourcepub fn as_input(&self) -> &GetDocumentTextDetectionInputBuilder
pub fn as_input(&self) -> &GetDocumentTextDetectionInputBuilder
Access the GetDocumentTextDetection as a reference.
Sourcepub async fn send(
self,
) -> Result<GetDocumentTextDetectionOutput, SdkError<GetDocumentTextDetectionError, HttpResponse>>
pub async fn send( self, ) -> Result<GetDocumentTextDetectionOutput, SdkError<GetDocumentTextDetectionError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<GetDocumentTextDetectionOutput, GetDocumentTextDetectionError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetDocumentTextDetectionOutput, GetDocumentTextDetectionError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn job_id(self, input: impl Into<String>) -> Self
pub fn job_id(self, input: impl Into<String>) -> Self
A unique identifier for the text detection job. The JobId is returned from StartDocumentTextDetection. A JobId value is only valid for 7 days.
Sourcepub fn set_job_id(self, input: Option<String>) -> Self
pub fn set_job_id(self, input: Option<String>) -> Self
A unique identifier for the text detection job. The JobId is returned from StartDocumentTextDetection. A JobId value is only valid for 7 days.
Sourcepub fn get_job_id(&self) -> &Option<String>
pub fn get_job_id(&self) -> &Option<String>
A unique identifier for the text detection job. The JobId is returned from StartDocumentTextDetection. A JobId value is only valid for 7 days.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of results to return per paginated call. The largest value you can specify is 1,000. If you specify a value greater than 1,000, a maximum of 1,000 results is returned. The default value is 1,000.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of results to return per paginated call. The largest value you can specify is 1,000. If you specify a value greater than 1,000, a maximum of 1,000 results is returned. The default value is 1,000.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of results to return per paginated call. The largest value you can specify is 1,000. If you specify a value greater than 1,000, a maximum of 1,000 results is returned. The default value is 1,000.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Trait Implementations§
Source§impl Clone for GetDocumentTextDetectionFluentBuilder
impl Clone for GetDocumentTextDetectionFluentBuilder
Source§fn clone(&self) -> GetDocumentTextDetectionFluentBuilder
fn clone(&self) -> GetDocumentTextDetectionFluentBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for GetDocumentTextDetectionFluentBuilder
impl !RefUnwindSafe for GetDocumentTextDetectionFluentBuilder
impl Send for GetDocumentTextDetectionFluentBuilder
impl Sync for GetDocumentTextDetectionFluentBuilder
impl Unpin for GetDocumentTextDetectionFluentBuilder
impl !UnwindSafe for GetDocumentTextDetectionFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);