pub struct GetDocumentAnalysisFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to GetDocumentAnalysis.
Gets the results for an Amazon Textract asynchronous operation that analyzes text in a document.
You start asynchronous text analysis by calling StartDocumentAnalysis, which returns a job identifier (JobId). When the text analysis operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartDocumentAnalysis. To get the results of the text-detection operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentAnalysis, and pass the job identifier (JobId) from the initial call to StartDocumentAnalysis.
GetDocumentAnalysis returns an array of Block objects. The following types of information are returned:
-
Form data (key-value pairs). The related information is returned in two
Blockobjects, each of typeKEY_VALUE_SET: a KEYBlockobject and a VALUEBlockobject. For example, Name: Ana Silva Carolina contains a key and value. Name: is the key. Ana Silva Carolina is the value. -
Table and table cell data. A TABLE
Blockobject contains information about a detected table. A CELLBlockobject is returned for each cell in a table. -
Lines and words of text. A LINE
Blockobject contains one or more WORDBlockobjects. All lines and words that are detected in the document are returned (including text that doesn't have a relationship with the value of theStartDocumentAnalysisFeatureTypesinput parameter). -
Query. A QUERY Block object contains the query text, alias and link to the associated Query results block object.
-
Query Results. A QUERY_RESULT Block object contains the answer to the query and an ID that connects it to the query asked. This Block also contains a confidence score.
While processing a document with queries, look out for INVALID_REQUEST_PARAMETERS output. This indicates that either the per page query limit has been exceeded or that the operation is trying to query a page in the document which doesn’t exist.
Selection elements such as check boxes and option buttons (radio buttons) can be detected in form data and in tables. A SELECTION_ELEMENT Block object contains information about a selection element, including the selection status.
Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults, the value of NextToken in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetDocumentAnalysis, and populate the NextToken request parameter with the token value that's returned from the previous call to GetDocumentAnalysis.
For more information, see Document Text Analysis.
Implementations§
Source§impl GetDocumentAnalysisFluentBuilder
impl GetDocumentAnalysisFluentBuilder
Sourcepub fn as_input(&self) -> &GetDocumentAnalysisInputBuilder
pub fn as_input(&self) -> &GetDocumentAnalysisInputBuilder
Access the GetDocumentAnalysis as a reference.
Sourcepub async fn send(
self,
) -> Result<GetDocumentAnalysisOutput, SdkError<GetDocumentAnalysisError, HttpResponse>>
pub async fn send( self, ) -> Result<GetDocumentAnalysisOutput, SdkError<GetDocumentAnalysisError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<GetDocumentAnalysisOutput, GetDocumentAnalysisError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetDocumentAnalysisOutput, GetDocumentAnalysisError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn job_id(self, input: impl Into<String>) -> Self
pub fn job_id(self, input: impl Into<String>) -> Self
A unique identifier for the text-detection job. The JobId is returned from StartDocumentAnalysis. A JobId value is only valid for 7 days.
Sourcepub fn set_job_id(self, input: Option<String>) -> Self
pub fn set_job_id(self, input: Option<String>) -> Self
A unique identifier for the text-detection job. The JobId is returned from StartDocumentAnalysis. A JobId value is only valid for 7 days.
Sourcepub fn get_job_id(&self) -> &Option<String>
pub fn get_job_id(&self) -> &Option<String>
A unique identifier for the text-detection job. The JobId is returned from StartDocumentAnalysis. A JobId value is only valid for 7 days.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of results to return per paginated call. The largest value that you can specify is 1,000. If you specify a value greater than 1,000, a maximum of 1,000 results is returned. The default value is 1,000.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of results to return per paginated call. The largest value that you can specify is 1,000. If you specify a value greater than 1,000, a maximum of 1,000 results is returned. The default value is 1,000.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of results to return per paginated call. The largest value that you can specify is 1,000. If you specify a value greater than 1,000, a maximum of 1,000 results is returned. The default value is 1,000.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
If the previous response was incomplete (because there are more blocks to retrieve), Amazon Textract returns a pagination token in the response. You can use this pagination token to retrieve the next set of blocks.
Trait Implementations§
Source§impl Clone for GetDocumentAnalysisFluentBuilder
impl Clone for GetDocumentAnalysisFluentBuilder
Source§fn clone(&self) -> GetDocumentAnalysisFluentBuilder
fn clone(&self) -> GetDocumentAnalysisFluentBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for GetDocumentAnalysisFluentBuilder
impl !RefUnwindSafe for GetDocumentAnalysisFluentBuilder
impl Send for GetDocumentAnalysisFluentBuilder
impl Sync for GetDocumentAnalysisFluentBuilder
impl Unpin for GetDocumentAnalysisFluentBuilder
impl !UnwindSafe for GetDocumentAnalysisFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);