#[non_exhaustive]pub struct CanaryScheduleOutput {
pub expression: Option<String>,
pub duration_in_seconds: Option<i64>,
pub retry_config: Option<RetryConfigOutput>,
}
Expand description
How long, in seconds, for the canary to continue making regular runs according to the schedule in the Expression
value.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.expression: Option<String>
A rate
expression or a cron
expression that defines how often the canary is to run.
For a rate expression, The syntax is rate(number unit)
. unit can be minute
, minutes
, or hour
.
For example, rate(1 minute)
runs the canary once a minute, rate(10 minutes)
runs it once every 10 minutes, and rate(1 hour)
runs it once every hour. You can specify a frequency between rate(1 minute)
and rate(1 hour)
.
Specifying rate(0 minute)
or rate(0 hour)
is a special value that causes the canary to run only once when it is started.
Use cron(expression)
to specify a cron expression. For information about the syntax for cron expressions, see Scheduling canary runs using cron.
duration_in_seconds: Option<i64>
How long, in seconds, for the canary to continue making regular runs after it was created. The runs are performed according to the schedule in the Expression
value.
retry_config: Option<RetryConfigOutput>
A structure that contains the retry configuration for a canary
Implementations§
Source§impl CanaryScheduleOutput
impl CanaryScheduleOutput
Sourcepub fn expression(&self) -> Option<&str>
pub fn expression(&self) -> Option<&str>
A rate
expression or a cron
expression that defines how often the canary is to run.
For a rate expression, The syntax is rate(number unit)
. unit can be minute
, minutes
, or hour
.
For example, rate(1 minute)
runs the canary once a minute, rate(10 minutes)
runs it once every 10 minutes, and rate(1 hour)
runs it once every hour. You can specify a frequency between rate(1 minute)
and rate(1 hour)
.
Specifying rate(0 minute)
or rate(0 hour)
is a special value that causes the canary to run only once when it is started.
Use cron(expression)
to specify a cron expression. For information about the syntax for cron expressions, see Scheduling canary runs using cron.
Sourcepub fn duration_in_seconds(&self) -> Option<i64>
pub fn duration_in_seconds(&self) -> Option<i64>
How long, in seconds, for the canary to continue making regular runs after it was created. The runs are performed according to the schedule in the Expression
value.
Sourcepub fn retry_config(&self) -> Option<&RetryConfigOutput>
pub fn retry_config(&self) -> Option<&RetryConfigOutput>
A structure that contains the retry configuration for a canary
Source§impl CanaryScheduleOutput
impl CanaryScheduleOutput
Sourcepub fn builder() -> CanaryScheduleOutputBuilder
pub fn builder() -> CanaryScheduleOutputBuilder
Creates a new builder-style object to manufacture CanaryScheduleOutput
.
Trait Implementations§
Source§impl Clone for CanaryScheduleOutput
impl Clone for CanaryScheduleOutput
Source§fn clone(&self) -> CanaryScheduleOutput
fn clone(&self) -> CanaryScheduleOutput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for CanaryScheduleOutput
impl Debug for CanaryScheduleOutput
Source§impl PartialEq for CanaryScheduleOutput
impl PartialEq for CanaryScheduleOutput
impl StructuralPartialEq for CanaryScheduleOutput
Auto Trait Implementations§
impl Freeze for CanaryScheduleOutput
impl RefUnwindSafe for CanaryScheduleOutput
impl Send for CanaryScheduleOutput
impl Sync for CanaryScheduleOutput
impl Unpin for CanaryScheduleOutput
impl UnwindSafe for CanaryScheduleOutput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);