pub struct RequestCancelWorkflowExecutionFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to RequestCancelWorkflowExecution.
Records a WorkflowExecutionCancelRequested event in the currently running workflow execution identified by the given domain, workflowId, and runId. This logically requests the cancellation of the workflow execution as a whole. It is up to the decider to take appropriate actions when it receives an execution history with this event.
If the runId isn't specified, the WorkflowExecutionCancelRequested event is recorded in the history of the current open workflow execution with the specified workflowId in the domain.
Because this action allows the workflow to properly clean up and gracefully close, it should be used instead of TerminateWorkflowExecution when possible.
Access Control
You can use IAM policies to control this action's access to Amazon SWF resources as follows:
-
Use a
Resourceelement with the domain name to limit the action to only specified domains. -
Use an
Actionelement to allow or deny permission to call this action. -
You cannot use an IAM policy to constrain this action's parameters.
If the caller doesn't have sufficient permissions to invoke the action, or the parameter values fall outside the specified constraints, the action fails. The associated event attribute's cause parameter is set to OPERATION_NOT_PERMITTED. For details and example IAM policies, see Using IAM to Manage Access to Amazon SWF Workflows in the Amazon SWF Developer Guide.
Implementations§
Source§impl RequestCancelWorkflowExecutionFluentBuilder
impl RequestCancelWorkflowExecutionFluentBuilder
Sourcepub fn as_input(&self) -> &RequestCancelWorkflowExecutionInputBuilder
pub fn as_input(&self) -> &RequestCancelWorkflowExecutionInputBuilder
Access the RequestCancelWorkflowExecution as a reference.
Sourcepub async fn send(
self,
) -> Result<RequestCancelWorkflowExecutionOutput, SdkError<RequestCancelWorkflowExecutionError, HttpResponse>>
pub async fn send( self, ) -> Result<RequestCancelWorkflowExecutionOutput, SdkError<RequestCancelWorkflowExecutionError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<RequestCancelWorkflowExecutionOutput, RequestCancelWorkflowExecutionError, Self>
pub fn customize( self, ) -> CustomizableOperation<RequestCancelWorkflowExecutionOutput, RequestCancelWorkflowExecutionError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn domain(self, input: impl Into<String>) -> Self
pub fn domain(self, input: impl Into<String>) -> Self
The name of the domain containing the workflow execution to cancel.
Sourcepub fn set_domain(self, input: Option<String>) -> Self
pub fn set_domain(self, input: Option<String>) -> Self
The name of the domain containing the workflow execution to cancel.
Sourcepub fn get_domain(&self) -> &Option<String>
pub fn get_domain(&self) -> &Option<String>
The name of the domain containing the workflow execution to cancel.
Sourcepub fn workflow_id(self, input: impl Into<String>) -> Self
pub fn workflow_id(self, input: impl Into<String>) -> Self
The workflowId of the workflow execution to cancel.
Sourcepub fn set_workflow_id(self, input: Option<String>) -> Self
pub fn set_workflow_id(self, input: Option<String>) -> Self
The workflowId of the workflow execution to cancel.
Sourcepub fn get_workflow_id(&self) -> &Option<String>
pub fn get_workflow_id(&self) -> &Option<String>
The workflowId of the workflow execution to cancel.
Sourcepub fn run_id(self, input: impl Into<String>) -> Self
pub fn run_id(self, input: impl Into<String>) -> Self
The runId of the workflow execution to cancel.
Sourcepub fn set_run_id(self, input: Option<String>) -> Self
pub fn set_run_id(self, input: Option<String>) -> Self
The runId of the workflow execution to cancel.
Sourcepub fn get_run_id(&self) -> &Option<String>
pub fn get_run_id(&self) -> &Option<String>
The runId of the workflow execution to cancel.
Trait Implementations§
Source§impl Clone for RequestCancelWorkflowExecutionFluentBuilder
impl Clone for RequestCancelWorkflowExecutionFluentBuilder
Source§fn clone(&self) -> RequestCancelWorkflowExecutionFluentBuilder
fn clone(&self) -> RequestCancelWorkflowExecutionFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for RequestCancelWorkflowExecutionFluentBuilder
impl !RefUnwindSafe for RequestCancelWorkflowExecutionFluentBuilder
impl Send for RequestCancelWorkflowExecutionFluentBuilder
impl Sync for RequestCancelWorkflowExecutionFluentBuilder
impl Unpin for RequestCancelWorkflowExecutionFluentBuilder
impl !UnwindSafe for RequestCancelWorkflowExecutionFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);