Struct aws_sdk_swf::operation::start_workflow_execution::StartWorkflowExecutionInput

source ·

#[non_exhaustive]pub struct StartWorkflowExecutionInput {
    pub domain: Option<String>,
    pub workflow_id: Option<String>,
    pub workflow_type: Option<WorkflowType>,
    pub task_list: Option<TaskList>,
    pub task_priority: Option<String>,
    pub input: Option<String>,
    pub execution_start_to_close_timeout: Option<String>,
    pub tag_list: Option<Vec<String>>,
    pub task_start_to_close_timeout: Option<String>,
    pub child_policy: Option<ChildPolicy>,
    pub lambda_role: Option<String>,
}

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

§domain: Option<String>

The name of the domain in which the workflow execution is created.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

§workflow_id: Option<String>

The user defined identifier associated with the workflow execution. You can use this to associate a custom identifier with the workflow execution. You may specify the same identifier if a workflow execution is logically a restart of a previous execution. You cannot have two open workflow executions with the same workflowId at the same time within the same domain.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

§workflow_type: Option<WorkflowType>

The type of the workflow to start.

§task_list: Option<TaskList>

The task list to use for the decision tasks generated for this workflow execution. This overrides the defaultTaskList specified when registering the workflow type.

A task list for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task list was specified at registration time then a fault is returned.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

§task_priority: Option<String>

The task priority to use for this workflow execution. This overrides any default priority that was assigned when the workflow type was registered. If not set, then the default task priority for the workflow type is used. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon SWF Developer Guide.

§input: Option<String>

The input for the workflow execution. This is a free form string which should be meaningful to the workflow you are starting. This input is made available to the new workflow execution in the WorkflowExecutionStarted history event.

§execution_start_to_close_timeout: Option<String>

The total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. Exceeding this limit causes the workflow execution to time out. Unlike some of the other timeout parameters in Amazon SWF, you cannot specify a value of "NONE" for this timeout; there is a one-year max limit on the time that a workflow execution can run.

An execution start-to-close timeout must be specified either through this parameter or as a default when the workflow type is registered. If neither this parameter nor a default execution start-to-close timeout is specified, a fault is returned.

§tag_list: Option<Vec<String>>

The list of tags to associate with the workflow execution. You can specify a maximum of 5 tags. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

§task_start_to_close_timeout: Option<String>

Specifies the maximum duration of decision tasks for this workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A task start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault is returned.

§child_policy: Option<ChildPolicy>

If set, specifies the policy to use for the child workflow executions of this workflow execution if it is terminated, by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

TERMINATE – The child executions are terminated.
REQUEST_CANCEL – A request to cancel is attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
ABANDON – No action is taken. The child executions continue to run.

A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault is returned.

§lambda_role: Option<String>

The IAM role to attach to this workflow execution.

Executions of this workflow type need IAM roles to invoke Lambda functions. If you don't attach an IAM role, any attempt to schedule a Lambda task fails. This results in a ScheduleLambdaFunctionFailed history event. For more information, see https://docs.aws.amazon.com/amazonswf/latest/developerguide/lambda-task.html in the Amazon SWF Developer Guide.

Struct aws_sdk_swf::operation::start_workflow_execution::StartWorkflowExecutionInput

Fields (Non-exhaustive)§

Implementations§

impl StartWorkflowExecutionInput

pub fn domain(&self) -> Option<&str>

pub fn workflow_id(&self) -> Option<&str>

pub fn workflow_type(&self) -> Option<&WorkflowType>

pub fn task_list(&self) -> Option<&TaskList>

pub fn task_priority(&self) -> Option<&str>

pub fn input(&self) -> Option<&str>

pub fn execution_start_to_close_timeout(&self) -> Option<&str>

pub fn tag_list(&self) -> &[String]

pub fn task_start_to_close_timeout(&self) -> Option<&str>

pub fn child_policy(&self) -> Option<&ChildPolicy>

pub fn lambda_role(&self) -> Option<&str>

impl StartWorkflowExecutionInput

pub fn builder() -> StartWorkflowExecutionInputBuilder

Trait Implementations§

impl Clone for StartWorkflowExecutionInput

fn clone(&self) -> StartWorkflowExecutionInput

fn clone_from(&mut self, source: &Self)

impl Debug for StartWorkflowExecutionInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl PartialEq for StartWorkflowExecutionInput

fn eq(&self, other: &StartWorkflowExecutionInput) -> bool

fn ne(&self, other: &Rhs) -> bool

impl StructuralPartialEq for StartWorkflowExecutionInput

Auto Trait Implementations§

impl RefUnwindSafe for StartWorkflowExecutionInput

impl Send for StartWorkflowExecutionInput

impl Sync for StartWorkflowExecutionInput

impl Unpin for StartWorkflowExecutionInput

impl UnwindSafe for StartWorkflowExecutionInput

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<Unshared, Shared> IntoShared<Shared> for Unsharedwhere Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

impl<T> Same for T

type Output = T

impl<T> ToOwned for Twhere T: Clone,

type Owned = T

fn to_owned(&self) -> T

fn clone_into(&self, target: &mut T)

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

fn with_current_subscriber(self) -> WithDispatch<Self>

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T, U> Into<U> for T
where U: From<T>,

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

impl<T> ToOwned for T
where T: Clone,

impl<T, U> TryFrom<U> for T
where U: Into<T>,

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,