Struct aws_sdk_swf::types::builders::ScheduleActivityTaskDecisionAttributesBuilder

#[non_exhaustive]
pub struct ScheduleActivityTaskDecisionAttributesBuilder { /* private fields */ }

A builder for ScheduleActivityTaskDecisionAttributes.

Implementations

impl ScheduleActivityTaskDecisionAttributesBuilder

pub fn activity_type(self, input: ActivityType) -> Self

The type of the activity task to schedule.

pub fn set_activity_type(self, input: Option<ActivityType>) -> Self

The type of the activity task to schedule.

pub fn get_activity_type(&self) -> &Option<ActivityType>

The type of the activity task to schedule.

pub fn activity_id(self, input: impl Into<String>) -> Self

The activityId of the activity task.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

pub fn set_activity_id(self, input: Option<String>) -> Self

The activityId of the activity task.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

pub fn get_activity_id(&self) -> &Option<String>

The activityId of the activity task.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

pub fn control(self, input: impl Into<String>) -> Self

Data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent to the activity.

pub fn set_control(self, input: Option<String>) -> Self

Data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent to the activity.

pub fn get_control(&self) -> &Option<String>

Data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent to the activity.

pub fn input(self, input: impl Into<String>) -> Self

The input provided to the activity task.

pub fn set_input(self, input: Option<String>) -> Self

The input provided to the activity task.

pub fn get_input(&self) -> &Option<String>

The input provided to the activity task.

pub fn schedule_to_close_timeout(self, input: impl Into<String>) -> Self

The maximum duration for this activity task.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-close timeout was specified at registration time then a fault is returned.

pub fn set_schedule_to_close_timeout(self, input: Option<String>) -> Self

The maximum duration for this activity task.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-close timeout was specified at registration time then a fault is returned.

pub fn get_schedule_to_close_timeout(&self) -> &Option<String>

The maximum duration for this activity task.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-close timeout was specified at registration time then a fault is returned.

pub fn task_list(self, input: TaskList) -> Self

If set, specifies the name of the task list in which to schedule the activity task. If not specified, the defaultTaskList registered with the activity type is used.

A task list for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default task list was specified at registration time then a fault is returned.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

pub fn set_task_list(self, input: Option<TaskList>) -> Self

If set, specifies the name of the task list in which to schedule the activity task. If not specified, the defaultTaskList registered with the activity type is used.

A task list for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default task list was specified at registration time then a fault is returned.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

pub fn get_task_list(&self) -> &Option<TaskList>

If set, specifies the name of the task list in which to schedule the activity task. If not specified, the defaultTaskList registered with the activity type is used.

A task list for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default task list was specified at registration time then a fault is returned.

The specified string must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not be the literal string arn.

pub fn task_priority(self, input: impl Into<String>) -> Self

If set, specifies the priority with which the activity task is to be assigned to a worker. This overrides the defaultTaskPriority specified when registering the activity type using RegisterActivityType. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon SWF Developer Guide.

pub fn set_task_priority(self, input: Option<String>) -> Self

If set, specifies the priority with which the activity task is to be assigned to a worker. This overrides the defaultTaskPriority specified when registering the activity type using RegisterActivityType. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon SWF Developer Guide.

pub fn get_task_priority(&self) -> &Option<String>

If set, specifies the priority with which the activity task is to be assigned to a worker. This overrides the defaultTaskPriority specified when registering the activity type using RegisterActivityType. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon SWF Developer Guide.

pub fn schedule_to_start_timeout(self, input: impl Into<String>) -> Self

If set, specifies the maximum duration the activity task can wait to be assigned to a worker. This overrides the default schedule-to-start timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-start timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-start timeout was specified at registration time then a fault is returned.

pub fn set_schedule_to_start_timeout(self, input: Option<String>) -> Self

If set, specifies the maximum duration the activity task can wait to be assigned to a worker. This overrides the default schedule-to-start timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-start timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-start timeout was specified at registration time then a fault is returned.

pub fn get_schedule_to_start_timeout(&self) -> &Option<String>

If set, specifies the maximum duration the activity task can wait to be assigned to a worker. This overrides the default schedule-to-start timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-start timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-start timeout was specified at registration time then a fault is returned.

pub fn start_to_close_timeout(self, input: impl Into<String>) -> Self

If set, specifies the maximum duration a worker may take to process this activity task. This overrides the default start-to-close timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A start-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default start-to-close timeout was specified at registration time then a fault is returned.

pub fn set_start_to_close_timeout(self, input: Option<String>) -> Self

If set, specifies the maximum duration a worker may take to process this activity task. This overrides the default start-to-close timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A start-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default start-to-close timeout was specified at registration time then a fault is returned.

pub fn get_start_to_close_timeout(&self) -> &Option<String>

If set, specifies the maximum duration a worker may take to process this activity task. This overrides the default start-to-close timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A start-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default start-to-close timeout was specified at registration time then a fault is returned.

pub fn heartbeat_timeout(self, input: impl Into<String>) -> Self

If set, specifies the maximum time before which a worker processing a task of this type must report progress by calling RecordActivityTaskHeartbeat. If the timeout is exceeded, the activity task is automatically timed out. If the worker subsequently attempts to record a heartbeat or returns a result, it is ignored. This overrides the default heartbeat timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

pub fn set_heartbeat_timeout(self, input: Option<String>) -> Self

If set, specifies the maximum time before which a worker processing a task of this type must report progress by calling RecordActivityTaskHeartbeat. If the timeout is exceeded, the activity task is automatically timed out. If the worker subsequently attempts to record a heartbeat or returns a result, it is ignored. This overrides the default heartbeat timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

pub fn get_heartbeat_timeout(&self) -> &Option<String>

If set, specifies the maximum time before which a worker processing a task of this type must report progress by calling RecordActivityTaskHeartbeat. If the timeout is exceeded, the activity task is automatically timed out. If the worker subsequently attempts to record a heartbeat or returns a result, it is ignored. This overrides the default heartbeat timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

pub fn build(self) -> ScheduleActivityTaskDecisionAttributes

Consumes the builder and constructs a ScheduleActivityTaskDecisionAttributes.

Trait Implementations

impl Clone for ScheduleActivityTaskDecisionAttributesBuilder

fn clone(&self) -> ScheduleActivityTaskDecisionAttributesBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ScheduleActivityTaskDecisionAttributesBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ScheduleActivityTaskDecisionAttributesBuilder

fn default() -> ScheduleActivityTaskDecisionAttributesBuilder

Returns the “default value” for a type.

impl PartialEq for ScheduleActivityTaskDecisionAttributesBuilder

fn eq(&self, other: &ScheduleActivityTaskDecisionAttributesBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for ScheduleActivityTaskDecisionAttributesBuilder