Struct aws_sdk_swf::model::schedule_activity_task_decision_attributes::Builder

#[non_exhaustive]
pub struct Builder { /* private fields */ }

A builder for ScheduleActivityTaskDecisionAttributes

Implementations

impl Builder

pub fn activity_type(self, input: ActivityType) -> Self

The type of the activity task to schedule.

pub fn set_activity_type(self, input: Option<ActivityType>) -> Self

The type of the activity task to schedule.

pub fn activity_id(self, input: impl Into<String>) -> Self

The activityId of the activity task.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string arn.

pub fn set_activity_id(self, input: Option<String>) -> Self

The activityId of the activity task.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string arn.

pub fn control(self, input: impl Into<String>) -> Self

Data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent to the activity.

pub fn set_control(self, input: Option<String>) -> Self

Data attached to the event that can be used by the decider in subsequent workflow tasks. This data isn't sent to the activity.

pub fn input(self, input: impl Into<String>) -> Self

The input provided to the activity task.

pub fn set_input(self, input: Option<String>) -> Self

The input provided to the activity task.

pub fn schedule_to_close_timeout(self, input: impl Into<String>) -> Self

The maximum duration for this activity task.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-close timeout was specified at registration time then a fault is returned.

pub fn set_schedule_to_close_timeout(self, input: Option<String>) -> Self

The maximum duration for this activity task.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-close timeout was specified at registration time then a fault is returned.

pub fn task_list(self, input: TaskList) -> Self

If set, specifies the name of the task list in which to schedule the activity task. If not specified, the defaultTaskList registered with the activity type is used.

A task list for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default task list was specified at registration time then a fault is returned.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string arn.

pub fn set_task_list(self, input: Option<TaskList>) -> Self

If set, specifies the name of the task list in which to schedule the activity task. If not specified, the defaultTaskList registered with the activity type is used.

A task list for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default task list was specified at registration time then a fault is returned.

The specified string must not start or end with whitespace. It must not contain a : (colon), / (slash), | (vertical bar), or any control characters (\u0000-\u001f | \u007f-\u009f). Also, it must not contain the literal string arn.

pub fn task_priority(self, input: impl Into<String>) -> Self

If set, specifies the priority with which the activity task is to be assigned to a worker. This overrides the defaultTaskPriority specified when registering the activity type using RegisterActivityType. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon SWF Developer Guide.

pub fn set_task_priority(self, input: Option<String>) -> Self

If set, specifies the priority with which the activity task is to be assigned to a worker. This overrides the defaultTaskPriority specified when registering the activity type using RegisterActivityType. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon SWF Developer Guide.

pub fn schedule_to_start_timeout(self, input: impl Into<String>) -> Self

If set, specifies the maximum duration the activity task can wait to be assigned to a worker. This overrides the default schedule-to-start timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-start timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-start timeout was specified at registration time then a fault is returned.

pub fn set_schedule_to_start_timeout(self, input: Option<String>) -> Self

If set, specifies the maximum duration the activity task can wait to be assigned to a worker. This overrides the default schedule-to-start timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A schedule-to-start timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default schedule-to-start timeout was specified at registration time then a fault is returned.

pub fn start_to_close_timeout(self, input: impl Into<String>) -> Self

If set, specifies the maximum duration a worker may take to process this activity task. This overrides the default start-to-close timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A start-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default start-to-close timeout was specified at registration time then a fault is returned.

pub fn set_start_to_close_timeout(self, input: Option<String>) -> Self

If set, specifies the maximum duration a worker may take to process this activity task. This overrides the default start-to-close timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

A start-to-close timeout for this activity task must be specified either as a default for the activity type or through this field. If neither this field is set nor a default start-to-close timeout was specified at registration time then a fault is returned.

pub fn heartbeat_timeout(self, input: impl Into<String>) -> Self

If set, specifies the maximum time before which a worker processing a task of this type must report progress by calling RecordActivityTaskHeartbeat. If the timeout is exceeded, the activity task is automatically timed out. If the worker subsequently attempts to record a heartbeat or returns a result, it is ignored. This overrides the default heartbeat timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

pub fn set_heartbeat_timeout(self, input: Option<String>) -> Self

If set, specifies the maximum time before which a worker processing a task of this type must report progress by calling RecordActivityTaskHeartbeat. If the timeout is exceeded, the activity task is automatically timed out. If the worker subsequently attempts to record a heartbeat or returns a result, it is ignored. This overrides the default heartbeat timeout specified when registering the activity type using RegisterActivityType.

The duration is specified in seconds, an integer greater than or equal to 0. You can use NONE to specify unlimited duration.

pub fn build(self) -> ScheduleActivityTaskDecisionAttributes

Consumes the builder and constructs a ScheduleActivityTaskDecisionAttributes

Trait Implementations

impl Clone for Builder

fn clone(&self) -> Builder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Builder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Builder

fn default() -> Builder

Returns the “default value” for a type.

impl PartialEq<Builder> for Builder

fn eq(&self, other: &Builder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Builder) -> bool

This method tests for !=.

impl StructuralPartialEq for Builder