#[non_exhaustive]pub struct CreateCaseInput {
pub subject: Option<String>,
pub service_code: Option<String>,
pub severity_code: Option<String>,
pub category_code: Option<String>,
pub communication_body: Option<String>,
pub cc_email_addresses: Option<Vec<String>>,
pub language: Option<String>,
pub issue_type: Option<String>,
pub attachment_set_id: Option<String>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.subject: Option<String>The title of the support case. The title appears in the Subject field on the Amazon Web Services Support Center Create Case page.
service_code: Option<String>The code for the Amazon Web Services service. You can use the DescribeServices operation to get the possible serviceCode values.
severity_code: Option<String>A value that indicates the urgency of the case. This value determines the response time according to your service level agreement with Amazon Web Services Support. You can use the DescribeSeverityLevels operation to get the possible values for severityCode.
For more information, see SeverityLevel and Choosing a Severity in the Amazon Web Services Support User Guide.
The availability of severity levels depends on the support plan for the Amazon Web Services account.
category_code: Option<String>The category of problem for the support case. You also use the DescribeServices operation to get the category code for a service. Each Amazon Web Services service defines its own set of category codes.
communication_body: Option<String>The communication body text that describes the issue. This text appears in the Description field on the Amazon Web Services Support Center Create Case page.
cc_email_addresses: Option<Vec<String>>A list of email addresses that Amazon Web Services Support copies on case correspondence. Amazon Web Services Support identifies the account that creates the case when you specify your Amazon Web Services credentials in an HTTP POST method or use the Amazon Web Services SDKs.
language: Option<String>The language in which Amazon Web Services Support handles the case. Amazon Web Services Support currently supports Chinese (“zh”), English ("en"), Japanese ("ja") and Korean (“ko”). You must specify the ISO 639-1 code for the language parameter if you want support in that language.
issue_type: Option<String>The type of issue for the case. You can specify customer-service or technical. If you don't specify a value, the default is technical.
attachment_set_id: Option<String>The ID of a set of one or more attachments for the case. Create the set by using the AddAttachmentsToSet operation.
Implementations§
Source§impl CreateCaseInput
impl CreateCaseInput
Sourcepub fn subject(&self) -> Option<&str>
pub fn subject(&self) -> Option<&str>
The title of the support case. The title appears in the Subject field on the Amazon Web Services Support Center Create Case page.
Sourcepub fn service_code(&self) -> Option<&str>
pub fn service_code(&self) -> Option<&str>
The code for the Amazon Web Services service. You can use the DescribeServices operation to get the possible serviceCode values.
Sourcepub fn severity_code(&self) -> Option<&str>
pub fn severity_code(&self) -> Option<&str>
A value that indicates the urgency of the case. This value determines the response time according to your service level agreement with Amazon Web Services Support. You can use the DescribeSeverityLevels operation to get the possible values for severityCode.
For more information, see SeverityLevel and Choosing a Severity in the Amazon Web Services Support User Guide.
The availability of severity levels depends on the support plan for the Amazon Web Services account.
Sourcepub fn category_code(&self) -> Option<&str>
pub fn category_code(&self) -> Option<&str>
The category of problem for the support case. You also use the DescribeServices operation to get the category code for a service. Each Amazon Web Services service defines its own set of category codes.
Sourcepub fn communication_body(&self) -> Option<&str>
pub fn communication_body(&self) -> Option<&str>
The communication body text that describes the issue. This text appears in the Description field on the Amazon Web Services Support Center Create Case page.
Sourcepub fn cc_email_addresses(&self) -> &[String]
pub fn cc_email_addresses(&self) -> &[String]
A list of email addresses that Amazon Web Services Support copies on case correspondence. Amazon Web Services Support identifies the account that creates the case when you specify your Amazon Web Services credentials in an HTTP POST method or use the Amazon Web Services SDKs.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .cc_email_addresses.is_none().
Sourcepub fn language(&self) -> Option<&str>
pub fn language(&self) -> Option<&str>
The language in which Amazon Web Services Support handles the case. Amazon Web Services Support currently supports Chinese (“zh”), English ("en"), Japanese ("ja") and Korean (“ko”). You must specify the ISO 639-1 code for the language parameter if you want support in that language.
Sourcepub fn issue_type(&self) -> Option<&str>
pub fn issue_type(&self) -> Option<&str>
The type of issue for the case. You can specify customer-service or technical. If you don't specify a value, the default is technical.
Sourcepub fn attachment_set_id(&self) -> Option<&str>
pub fn attachment_set_id(&self) -> Option<&str>
The ID of a set of one or more attachments for the case. Create the set by using the AddAttachmentsToSet operation.
Source§impl CreateCaseInput
impl CreateCaseInput
Sourcepub fn builder() -> CreateCaseInputBuilder
pub fn builder() -> CreateCaseInputBuilder
Creates a new builder-style object to manufacture CreateCaseInput.
Trait Implementations§
Source§impl Clone for CreateCaseInput
impl Clone for CreateCaseInput
Source§fn clone(&self) -> CreateCaseInput
fn clone(&self) -> CreateCaseInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for CreateCaseInput
impl Debug for CreateCaseInput
Source§impl PartialEq for CreateCaseInput
impl PartialEq for CreateCaseInput
impl StructuralPartialEq for CreateCaseInput
Auto Trait Implementations§
impl Freeze for CreateCaseInput
impl RefUnwindSafe for CreateCaseInput
impl Send for CreateCaseInput
impl Sync for CreateCaseInput
impl Unpin for CreateCaseInput
impl UnwindSafe for CreateCaseInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);