UpdateSmbFileShareInputBuilder

aws_sdk_storagegateway::operation::update_smb_file_share::builders

Struct UpdateSmbFileShareInputBuilder 

Source 
#[non_exhaustive]
pub struct UpdateSmbFileShareInputBuilder { /* private fields */ }
Expand description

A builder for UpdateSmbFileShareInput.

Implementations§

Source§

impl UpdateSmbFileShareInputBuilder

Source

pub fn file_share_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the SMB file share that you want to update.

This field is required.
Source

pub fn set_file_share_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the SMB file share that you want to update.

Source

pub fn get_file_share_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the SMB file share that you want to update.

Source

pub fn encryption_type(self, input: EncryptionType) -> Self

A value that specifies the type of server-side encryption that the file share will use for the data that it stores in Amazon S3.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Source

pub fn set_encryption_type(self, input: Option<EncryptionType>) -> Self

A value that specifies the type of server-side encryption that the file share will use for the data that it stores in Amazon S3.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Source

pub fn get_encryption_type(&self) -> &Option<EncryptionType>

A value that specifies the type of server-side encryption that the file share will use for the data that it stores in Amazon S3.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Source

pub fn kms_encrypted(self, input: bool) -> Self

👎Deprecated: KMSEncrypted is deprecated, use EncryptionType instead.

Optional. Set to true to use Amazon S3 server-side encryption with your own KMS key (SSE-KMS), or false to use a key managed by Amazon S3 (SSE-S3). To use dual-layer encryption (DSSE-KMS), set the EncryptionType parameter instead.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Valid Values: true | false

Source

pub fn set_kms_encrypted(self, input: Option<bool>) -> Self

👎Deprecated: KMSEncrypted is deprecated, use EncryptionType instead.

Optional. Set to true to use Amazon S3 server-side encryption with your own KMS key (SSE-KMS), or false to use a key managed by Amazon S3 (SSE-S3). To use dual-layer encryption (DSSE-KMS), set the EncryptionType parameter instead.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Valid Values: true | false

Source

pub fn get_kms_encrypted(&self) -> &Option<bool>

👎Deprecated: KMSEncrypted is deprecated, use EncryptionType instead.

Optional. Set to true to use Amazon S3 server-side encryption with your own KMS key (SSE-KMS), or false to use a key managed by Amazon S3 (SSE-S3). To use dual-layer encryption (DSSE-KMS), set the EncryptionType parameter instead.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Valid Values: true | false

Source

pub fn kms_key(self, input: impl Into<String>) -> Self

Optional. The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used for Amazon S3 server-side encryption. Storage Gateway does not support asymmetric CMKs. This value must be set if KMSEncrypted is true, or if EncryptionType is SseKms or DsseKms.

Source

pub fn set_kms_key(self, input: Option<String>) -> Self

Optional. The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used for Amazon S3 server-side encryption. Storage Gateway does not support asymmetric CMKs. This value must be set if KMSEncrypted is true, or if EncryptionType is SseKms or DsseKms.

Source

pub fn get_kms_key(&self) -> &Option<String>

Optional. The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used for Amazon S3 server-side encryption. Storage Gateway does not support asymmetric CMKs. This value must be set if KMSEncrypted is true, or if EncryptionType is SseKms or DsseKms.

Source

pub fn default_storage_class(self, input: impl Into<String>) -> Self

The default storage class for objects put into an Amazon S3 bucket by the S3 File Gateway. The default value is S3_STANDARD. Optional.

Valid Values: S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA

Source

pub fn set_default_storage_class(self, input: Option<String>) -> Self

The default storage class for objects put into an Amazon S3 bucket by the S3 File Gateway. The default value is S3_STANDARD. Optional.

Valid Values: S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA

Source

pub fn get_default_storage_class(&self) -> &Option<String>

The default storage class for objects put into an Amazon S3 bucket by the S3 File Gateway. The default value is S3_STANDARD. Optional.

Valid Values: S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA

Source

pub fn object_acl(self, input: ObjectAcl) -> Self

A value that sets the access control list (ACL) permission for objects in the S3 bucket that a S3 File Gateway puts objects into. The default value is private.

Source

pub fn set_object_acl(self, input: Option<ObjectAcl>) -> Self

A value that sets the access control list (ACL) permission for objects in the S3 bucket that a S3 File Gateway puts objects into. The default value is private.

Source

pub fn get_object_acl(&self) -> &Option<ObjectAcl>

A value that sets the access control list (ACL) permission for objects in the S3 bucket that a S3 File Gateway puts objects into. The default value is private.

Source

pub fn read_only(self, input: bool) -> Self

A value that sets the write status of a file share. Set this value to true to set write status to read-only, otherwise set to false.

Valid Values: true | false

Source

pub fn set_read_only(self, input: Option<bool>) -> Self

A value that sets the write status of a file share. Set this value to true to set write status to read-only, otherwise set to false.

Valid Values: true | false

Source

pub fn get_read_only(&self) -> &Option<bool>

A value that sets the write status of a file share. Set this value to true to set write status to read-only, otherwise set to false.

Valid Values: true | false

Source

pub fn guess_mime_type_enabled(self, input: bool) -> Self

A value that enables guessing of the MIME type for uploaded objects based on file extensions. Set this value to true to enable MIME type guessing, otherwise set to false. The default value is true.

Valid Values: true | false

Source

pub fn set_guess_mime_type_enabled(self, input: Option<bool>) -> Self

A value that enables guessing of the MIME type for uploaded objects based on file extensions. Set this value to true to enable MIME type guessing, otherwise set to false. The default value is true.

Valid Values: true | false

Source

pub fn get_guess_mime_type_enabled(&self) -> &Option<bool>

A value that enables guessing of the MIME type for uploaded objects based on file extensions. Set this value to true to enable MIME type guessing, otherwise set to false. The default value is true.

Valid Values: true | false

Source

pub fn requester_pays(self, input: bool) -> Self

A value that sets who pays the cost of the request and the cost associated with data download from the S3 bucket. If this value is set to true, the requester pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket owner always pays the cost of storing data.

RequesterPays is a configuration for the S3 bucket that backs the file share, so make sure that the configuration on the file share is the same as the S3 bucket configuration.

Valid Values: true | false

Source

pub fn set_requester_pays(self, input: Option<bool>) -> Self

A value that sets who pays the cost of the request and the cost associated with data download from the S3 bucket. If this value is set to true, the requester pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket owner always pays the cost of storing data.

RequesterPays is a configuration for the S3 bucket that backs the file share, so make sure that the configuration on the file share is the same as the S3 bucket configuration.

Valid Values: true | false

Source

pub fn get_requester_pays(&self) -> &Option<bool>

A value that sets who pays the cost of the request and the cost associated with data download from the S3 bucket. If this value is set to true, the requester pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket owner always pays the cost of storing data.

RequesterPays is a configuration for the S3 bucket that backs the file share, so make sure that the configuration on the file share is the same as the S3 bucket configuration.

Valid Values: true | false

Source

pub fn smbacl_enabled(self, input: bool) -> Self

Set this value to true to enable access control list (ACL) on the SMB file share. Set it to false to map file and directory permissions to the POSIX permissions.

For more information, see Using Windows ACLs to limit SMB file share access in the Amazon S3 File Gateway User Guide.

Valid Values: true | false

Source

pub fn set_smbacl_enabled(self, input: Option<bool>) -> Self

Set this value to true to enable access control list (ACL) on the SMB file share. Set it to false to map file and directory permissions to the POSIX permissions.

For more information, see Using Windows ACLs to limit SMB file share access in the Amazon S3 File Gateway User Guide.

Valid Values: true | false

Source

pub fn get_smbacl_enabled(&self) -> &Option<bool>

Set this value to true to enable access control list (ACL) on the SMB file share. Set it to false to map file and directory permissions to the POSIX permissions.

For more information, see Using Windows ACLs to limit SMB file share access in the Amazon S3 File Gateway User Guide.

Valid Values: true | false

Source

pub fn access_based_enumeration(self, input: bool) -> Self

The files and folders on this share will only be visible to users with read access.

Source

pub fn set_access_based_enumeration(self, input: Option<bool>) -> Self

The files and folders on this share will only be visible to users with read access.

Source

pub fn get_access_based_enumeration(&self) -> &Option<bool>

The files and folders on this share will only be visible to users with read access.

Source

pub fn admin_user_list(self, input: impl Into<String>) -> Self

Appends an item to admin_user_list.

To override the contents of this collection use set_admin_user_list.

A list of users or groups in the Active Directory that have administrator rights to the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn set_admin_user_list(self, input: Option<Vec<String>>) -> Self

A list of users or groups in the Active Directory that have administrator rights to the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn get_admin_user_list(&self) -> &Option<Vec<String>>

A list of users or groups in the Active Directory that have administrator rights to the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn valid_user_list(self, input: impl Into<String>) -> Self

Appends an item to valid_user_list.

To override the contents of this collection use set_valid_user_list.

A list of users or groups in the Active Directory that are allowed to access the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn set_valid_user_list(self, input: Option<Vec<String>>) -> Self

A list of users or groups in the Active Directory that are allowed to access the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn get_valid_user_list(&self) -> &Option<Vec<String>>

A list of users or groups in the Active Directory that are allowed to access the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn invalid_user_list(self, input: impl Into<String>) -> Self

Appends an item to invalid_user_list.

To override the contents of this collection use set_invalid_user_list.

A list of users or groups in the Active Directory that are not allowed to access the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn set_invalid_user_list(self, input: Option<Vec<String>>) -> Self

A list of users or groups in the Active Directory that are not allowed to access the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn get_invalid_user_list(&self) -> &Option<Vec<String>>

A list of users or groups in the Active Directory that are not allowed to access the file share. A group must be prefixed with the @ character. Acceptable formats include: DOMAIN\User1, user1, @group1, and @DOMAIN\group1. Can only be set if Authentication is set to ActiveDirectory.

Source

pub fn audit_destination_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the storage used for audit logs.

Source

pub fn set_audit_destination_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the storage used for audit logs.

Source

pub fn get_audit_destination_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the storage used for audit logs.

Source

pub fn case_sensitivity(self, input: CaseSensitivity) -> Self

The case of an object name in an Amazon S3 bucket. For ClientSpecified, the client determines the case sensitivity. For CaseSensitive, the gateway determines the case sensitivity. The default value is ClientSpecified.

Source

pub fn set_case_sensitivity(self, input: Option<CaseSensitivity>) -> Self

The case of an object name in an Amazon S3 bucket. For ClientSpecified, the client determines the case sensitivity. For CaseSensitive, the gateway determines the case sensitivity. The default value is ClientSpecified.

Source

pub fn get_case_sensitivity(&self) -> &Option<CaseSensitivity>

The case of an object name in an Amazon S3 bucket. For ClientSpecified, the client determines the case sensitivity. For CaseSensitive, the gateway determines the case sensitivity. The default value is ClientSpecified.

Source

pub fn file_share_name(self, input: impl Into<String>) -> Self

The name of the file share. Optional.

FileShareName must be set if an S3 prefix name is set in LocationARN, or if an access point or access point alias is used.

A valid SMB file share name cannot contain the following characters: \[,\],#,;,<,>,:,",\,/,|,?,*,+, or ASCII control characters 1-31.

Source

pub fn set_file_share_name(self, input: Option<String>) -> Self

The name of the file share. Optional.

FileShareName must be set if an S3 prefix name is set in LocationARN, or if an access point or access point alias is used.

A valid SMB file share name cannot contain the following characters: \[,\],#,;,<,>,:,",\,/,|,?,*,+, or ASCII control characters 1-31.

Source

pub fn get_file_share_name(&self) -> &Option<String>

The name of the file share. Optional.

FileShareName must be set if an S3 prefix name is set in LocationARN, or if an access point or access point alias is used.

A valid SMB file share name cannot contain the following characters: \[,\],#,;,<,>,:,",\,/,|,?,*,+, or ASCII control characters 1-31.

Source

pub fn cache_attributes(self, input: CacheAttributes) -> Self

Specifies refresh cache information for the file share.

Source

pub fn set_cache_attributes(self, input: Option<CacheAttributes>) -> Self

Specifies refresh cache information for the file share.

Source

pub fn get_cache_attributes(&self) -> &Option<CacheAttributes>

Specifies refresh cache information for the file share.

Source

pub fn notification_policy(self, input: impl Into<String>) -> Self

The notification policy of the file share. SettlingTimeInSeconds controls the number of seconds to wait after the last point in time a client wrote to a file before generating an ObjectUploaded notification. Because clients can make many small writes to files, it's best to set this parameter for as long as possible to avoid generating multiple notifications for the same file in a small time period.

SettlingTimeInSeconds has no effect on the timing of the object uploading to Amazon S3, only the timing of the notification.

This setting is not meant to specify an exact time at which the notification will be sent. In some cases, the gateway might require more than the specified delay time to generate and send notifications.

The following example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.

{\"Upload\": {\"SettlingTimeInSeconds\": 60}}

The following example sets NotificationPolicy off.

{}

Source

pub fn set_notification_policy(self, input: Option<String>) -> Self

The notification policy of the file share. SettlingTimeInSeconds controls the number of seconds to wait after the last point in time a client wrote to a file before generating an ObjectUploaded notification. Because clients can make many small writes to files, it's best to set this parameter for as long as possible to avoid generating multiple notifications for the same file in a small time period.

SettlingTimeInSeconds has no effect on the timing of the object uploading to Amazon S3, only the timing of the notification.

This setting is not meant to specify an exact time at which the notification will be sent. In some cases, the gateway might require more than the specified delay time to generate and send notifications.

The following example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.

{\"Upload\": {\"SettlingTimeInSeconds\": 60}}

The following example sets NotificationPolicy off.

{}

Source

pub fn get_notification_policy(&self) -> &Option<String>

The notification policy of the file share. SettlingTimeInSeconds controls the number of seconds to wait after the last point in time a client wrote to a file before generating an ObjectUploaded notification. Because clients can make many small writes to files, it's best to set this parameter for as long as possible to avoid generating multiple notifications for the same file in a small time period.

SettlingTimeInSeconds has no effect on the timing of the object uploading to Amazon S3, only the timing of the notification.

This setting is not meant to specify an exact time at which the notification will be sent. In some cases, the gateway might require more than the specified delay time to generate and send notifications.

The following example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.

{\"Upload\": {\"SettlingTimeInSeconds\": 60}}

The following example sets NotificationPolicy off.

{}

Source

pub fn oplocks_enabled(self, input: bool) -> Self

Specifies whether opportunistic locking is enabled for the SMB file share.

Enabling opportunistic locking on case-sensitive shares is not recommended for workloads that involve access to files with the same name in different case.

Valid Values: true | false

Source

pub fn set_oplocks_enabled(self, input: Option<bool>) -> Self

Specifies whether opportunistic locking is enabled for the SMB file share.

Enabling opportunistic locking on case-sensitive shares is not recommended for workloads that involve access to files with the same name in different case.

Valid Values: true | false

Source

pub fn get_oplocks_enabled(&self) -> &Option<bool>

Specifies whether opportunistic locking is enabled for the SMB file share.

Enabling opportunistic locking on case-sensitive shares is not recommended for workloads that involve access to files with the same name in different case.

Valid Values: true | false

Source

pub fn build(self) -> Result<UpdateSmbFileShareInput, BuildError>

Consumes the builder and constructs a UpdateSmbFileShareInput.

Source§

impl UpdateSmbFileShareInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<UpdateSmbFileShareOutput, SdkError<UpdateSMBFileShareError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source§

impl Clone for UpdateSmbFileShareInputBuilder

Source§

fn clone(&self) -> UpdateSmbFileShareInputBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for UpdateSmbFileShareInputBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for UpdateSmbFileShareInputBuilder

Source§

fn default() -> UpdateSmbFileShareInputBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for UpdateSmbFileShareInputBuilder

Source§

fn eq(&self, other: &UpdateSmbFileShareInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for UpdateSmbFileShareInputBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,