pub struct ShutdownGatewayFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ShutdownGateway.
Shuts down a Tape Gateway or Volume Gateway. To specify which gateway to shut down, use the Amazon Resource Name (ARN) of the gateway in the body of your request.
This API action cannot be used to shut down S3 File Gateway or FSx File Gateway.
The operation shuts down the gateway service component running in the gateway's virtual machine (VM) and not the host VM.
If you want to shut down the VM, it is recommended that you first shut down the gateway component in the VM to avoid unpredictable conditions.
After the gateway is shutdown, you cannot call any other API except StartGateway, DescribeGatewayInformation, and ListGateways. For more information, see ActivateGateway. Your applications cannot read from or write to the gateway's storage volumes, and there are no snapshots taken.
When you make a shutdown request, you will get a 200 OK success response immediately. However, it might take some time for the gateway to shut down. You can call the DescribeGatewayInformation API to check the status. For more information, see ActivateGateway.
If do not intend to use the gateway again, you must delete the gateway (using DeleteGateway) to no longer pay software charges associated with the gateway.
Implementations§
Source§impl ShutdownGatewayFluentBuilder
impl ShutdownGatewayFluentBuilder
Sourcepub fn as_input(&self) -> &ShutdownGatewayInputBuilder
pub fn as_input(&self) -> &ShutdownGatewayInputBuilder
Access the ShutdownGateway as a reference.
Sourcepub async fn send(
self,
) -> Result<ShutdownGatewayOutput, SdkError<ShutdownGatewayError, HttpResponse>>
pub async fn send( self, ) -> Result<ShutdownGatewayOutput, SdkError<ShutdownGatewayError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ShutdownGatewayOutput, ShutdownGatewayError, Self>
pub fn customize( self, ) -> CustomizableOperation<ShutdownGatewayOutput, ShutdownGatewayError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn gateway_arn(self, input: impl Into<String>) -> Self
pub fn gateway_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation to return a list of gateways for your account and Amazon Web Services Region.
Sourcepub fn set_gateway_arn(self, input: Option<String>) -> Self
pub fn set_gateway_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation to return a list of gateways for your account and Amazon Web Services Region.
Sourcepub fn get_gateway_arn(&self) -> &Option<String>
pub fn get_gateway_arn(&self) -> &Option<String>
The Amazon Resource Name (ARN) of the gateway. Use the ListGateways operation to return a list of gateways for your account and Amazon Web Services Region.
Trait Implementations§
Source§impl Clone for ShutdownGatewayFluentBuilder
impl Clone for ShutdownGatewayFluentBuilder
Source§fn clone(&self) -> ShutdownGatewayFluentBuilder
fn clone(&self) -> ShutdownGatewayFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ShutdownGatewayFluentBuilder
impl !RefUnwindSafe for ShutdownGatewayFluentBuilder
impl Send for ShutdownGatewayFluentBuilder
impl Sync for ShutdownGatewayFluentBuilder
impl Unpin for ShutdownGatewayFluentBuilder
impl !UnwindSafe for ShutdownGatewayFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);