CreateNfsFileShareInputBuilder

aws_sdk_storagegateway::operation::create_nfs_file_share::builders

Struct CreateNfsFileShareInputBuilder 

Source 
#[non_exhaustive]
pub struct CreateNfsFileShareInputBuilder { /* private fields */ }
Expand description

A builder for CreateNfsFileShareInput.

Implementations§

Source§

impl CreateNfsFileShareInputBuilder

Source

pub fn client_token(self, input: impl Into<String>) -> Self

A unique string value that you supply that is used by S3 File Gateway to ensure idempotent file share creation.

This field is required.
Source

pub fn set_client_token(self, input: Option<String>) -> Self

A unique string value that you supply that is used by S3 File Gateway to ensure idempotent file share creation.

Source

pub fn get_client_token(&self) -> &Option<String>

A unique string value that you supply that is used by S3 File Gateway to ensure idempotent file share creation.

Source

pub fn nfs_file_share_defaults(self, input: NfsFileShareDefaults) -> Self

File share default values. Optional.

Source

pub fn set_nfs_file_share_defaults( self, input: Option<NfsFileShareDefaults>, ) -> Self

File share default values. Optional.

Source

pub fn get_nfs_file_share_defaults(&self) -> &Option<NfsFileShareDefaults>

File share default values. Optional.

Source

pub fn gateway_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the S3 File Gateway on which you want to create a file share.

This field is required.
Source

pub fn set_gateway_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the S3 File Gateway on which you want to create a file share.

Source

pub fn get_gateway_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the S3 File Gateway on which you want to create a file share.

Source

pub fn encryption_type(self, input: EncryptionType) -> Self

A value that specifies the type of server-side encryption that the file share will use for the data that it stores in Amazon S3.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Source

pub fn set_encryption_type(self, input: Option<EncryptionType>) -> Self

A value that specifies the type of server-side encryption that the file share will use for the data that it stores in Amazon S3.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Source

pub fn get_encryption_type(&self) -> &Option<EncryptionType>

A value that specifies the type of server-side encryption that the file share will use for the data that it stores in Amazon S3.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Source

pub fn kms_encrypted(self, input: bool) -> Self

👎Deprecated: KMSEncrypted is deprecated, use EncryptionType instead.

Optional. Set to true to use Amazon S3 server-side encryption with your own KMS key (SSE-KMS), or false to use a key managed by Amazon S3 (SSE-S3). To use dual-layer encryption (DSSE-KMS), set the EncryptionType parameter instead.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Valid Values: true | false

Source

pub fn set_kms_encrypted(self, input: Option<bool>) -> Self

👎Deprecated: KMSEncrypted is deprecated, use EncryptionType instead.

Optional. Set to true to use Amazon S3 server-side encryption with your own KMS key (SSE-KMS), or false to use a key managed by Amazon S3 (SSE-S3). To use dual-layer encryption (DSSE-KMS), set the EncryptionType parameter instead.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Valid Values: true | false

Source

pub fn get_kms_encrypted(&self) -> &Option<bool>

👎Deprecated: KMSEncrypted is deprecated, use EncryptionType instead.

Optional. Set to true to use Amazon S3 server-side encryption with your own KMS key (SSE-KMS), or false to use a key managed by Amazon S3 (SSE-S3). To use dual-layer encryption (DSSE-KMS), set the EncryptionType parameter instead.

We recommend using EncryptionType instead of KMSEncrypted to set the file share encryption method. You do not need to provide values for both parameters.

If values for both parameters exist in the same request, then the specified encryption methods must not conflict. For example, if EncryptionType is SseS3, then KMSEncrypted must be false. If EncryptionType is SseKms or DsseKms, then KMSEncrypted must be true.

Valid Values: true | false

Source

pub fn kms_key(self, input: impl Into<String>) -> Self

Optional. The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used for Amazon S3 server-side encryption. Storage Gateway does not support asymmetric CMKs. This value must be set if KMSEncrypted is true, or if EncryptionType is SseKms or DsseKms.

Source

pub fn set_kms_key(self, input: Option<String>) -> Self

Optional. The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used for Amazon S3 server-side encryption. Storage Gateway does not support asymmetric CMKs. This value must be set if KMSEncrypted is true, or if EncryptionType is SseKms or DsseKms.

Source

pub fn get_kms_key(&self) -> &Option<String>

Optional. The Amazon Resource Name (ARN) of a symmetric customer master key (CMK) used for Amazon S3 server-side encryption. Storage Gateway does not support asymmetric CMKs. This value must be set if KMSEncrypted is true, or if EncryptionType is SseKms or DsseKms.

Source

pub fn role(self, input: impl Into<String>) -> Self

The ARN of the Identity and Access Management (IAM) role that an S3 File Gateway assumes when it accesses the underlying storage.

This field is required.
Source

pub fn set_role(self, input: Option<String>) -> Self

The ARN of the Identity and Access Management (IAM) role that an S3 File Gateway assumes when it accesses the underlying storage.

Source

pub fn get_role(&self) -> &Option<String>

The ARN of the Identity and Access Management (IAM) role that an S3 File Gateway assumes when it accesses the underlying storage.

Source

pub fn location_arn(self, input: impl Into<String>) -> Self

A custom ARN for the backend storage used for storing data for file shares. It includes a resource ARN with an optional prefix concatenation. The prefix must end with a forward slash (/).

You can specify LocationARN as a bucket ARN, access point ARN or access point alias, as shown in the following examples.

Bucket ARN:

arn:aws:s3:::amzn-s3-demo-bucket/prefix/

Access point ARN:

arn:aws:s3:region:account-id:accesspoint/access-point-name/prefix/

If you specify an access point, the bucket policy must be configured to delegate access control to the access point. For information, see Delegating access control to access points in the Amazon S3 User Guide.

Access point alias:

test-ap-ab123cdef4gehijklmn5opqrstuvuse1a-s3alias

 This field is required.
Source

pub fn set_location_arn(self, input: Option<String>) -> Self

A custom ARN for the backend storage used for storing data for file shares. It includes a resource ARN with an optional prefix concatenation. The prefix must end with a forward slash (/).

You can specify LocationARN as a bucket ARN, access point ARN or access point alias, as shown in the following examples.

Bucket ARN:

arn:aws:s3:::amzn-s3-demo-bucket/prefix/

Access point ARN:

arn:aws:s3:region:account-id:accesspoint/access-point-name/prefix/

If you specify an access point, the bucket policy must be configured to delegate access control to the access point. For information, see Delegating access control to access points in the Amazon S3 User Guide.

Access point alias:

test-ap-ab123cdef4gehijklmn5opqrstuvuse1a-s3alias

Source

pub fn get_location_arn(&self) -> &Option<String>

A custom ARN for the backend storage used for storing data for file shares. It includes a resource ARN with an optional prefix concatenation. The prefix must end with a forward slash (/).

You can specify LocationARN as a bucket ARN, access point ARN or access point alias, as shown in the following examples.

Bucket ARN:

arn:aws:s3:::amzn-s3-demo-bucket/prefix/

Access point ARN:

arn:aws:s3:region:account-id:accesspoint/access-point-name/prefix/

If you specify an access point, the bucket policy must be configured to delegate access control to the access point. For information, see Delegating access control to access points in the Amazon S3 User Guide.

Access point alias:

test-ap-ab123cdef4gehijklmn5opqrstuvuse1a-s3alias

Source

pub fn default_storage_class(self, input: impl Into<String>) -> Self

The default storage class for objects put into an Amazon S3 bucket by the S3 File Gateway. The default value is S3_STANDARD. Optional.

Valid Values: S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA

Source

pub fn set_default_storage_class(self, input: Option<String>) -> Self

The default storage class for objects put into an Amazon S3 bucket by the S3 File Gateway. The default value is S3_STANDARD. Optional.

Valid Values: S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA

Source

pub fn get_default_storage_class(&self) -> &Option<String>

The default storage class for objects put into an Amazon S3 bucket by the S3 File Gateway. The default value is S3_STANDARD. Optional.

Valid Values: S3_STANDARD | S3_INTELLIGENT_TIERING | S3_STANDARD_IA | S3_ONEZONE_IA

Source

pub fn object_acl(self, input: ObjectAcl) -> Self

A value that sets the access control list (ACL) permission for objects in the S3 bucket that a S3 File Gateway puts objects into. The default value is private.

Source

pub fn set_object_acl(self, input: Option<ObjectAcl>) -> Self

A value that sets the access control list (ACL) permission for objects in the S3 bucket that a S3 File Gateway puts objects into. The default value is private.

Source

pub fn get_object_acl(&self) -> &Option<ObjectAcl>

A value that sets the access control list (ACL) permission for objects in the S3 bucket that a S3 File Gateway puts objects into. The default value is private.

Source

pub fn client_list(self, input: impl Into<String>) -> Self

Appends an item to client_list.

To override the contents of this collection use set_client_list.

The list of clients that are allowed to access the S3 File Gateway. The list must contain either valid IPv4/IPv6 addresses or valid CIDR blocks.

Source

pub fn set_client_list(self, input: Option<Vec<String>>) -> Self

The list of clients that are allowed to access the S3 File Gateway. The list must contain either valid IPv4/IPv6 addresses or valid CIDR blocks.

Source

pub fn get_client_list(&self) -> &Option<Vec<String>>

The list of clients that are allowed to access the S3 File Gateway. The list must contain either valid IPv4/IPv6 addresses or valid CIDR blocks.

Source

pub fn squash(self, input: impl Into<String>) -> Self

A value that maps a user to anonymous user.

Valid values are the following:

  • RootSquash: Only root is mapped to anonymous user.

  • NoSquash: No one is mapped to anonymous user.

  • AllSquash: Everyone is mapped to anonymous user.

Source

pub fn set_squash(self, input: Option<String>) -> Self

A value that maps a user to anonymous user.

Valid values are the following:

  • RootSquash: Only root is mapped to anonymous user.

  • NoSquash: No one is mapped to anonymous user.

  • AllSquash: Everyone is mapped to anonymous user.

Source

pub fn get_squash(&self) -> &Option<String>

A value that maps a user to anonymous user.

Valid values are the following:

  • RootSquash: Only root is mapped to anonymous user.

  • NoSquash: No one is mapped to anonymous user.

  • AllSquash: Everyone is mapped to anonymous user.

Source

pub fn read_only(self, input: bool) -> Self

A value that sets the write status of a file share. Set this value to true to set the write status to read-only, otherwise set to false.

Valid Values: true | false

Source

pub fn set_read_only(self, input: Option<bool>) -> Self

A value that sets the write status of a file share. Set this value to true to set the write status to read-only, otherwise set to false.

Valid Values: true | false

Source

pub fn get_read_only(&self) -> &Option<bool>

A value that sets the write status of a file share. Set this value to true to set the write status to read-only, otherwise set to false.

Valid Values: true | false

Source

pub fn guess_mime_type_enabled(self, input: bool) -> Self

A value that enables guessing of the MIME type for uploaded objects based on file extensions. Set this value to true to enable MIME type guessing, otherwise set to false. The default value is true.

Valid Values: true | false

Source

pub fn set_guess_mime_type_enabled(self, input: Option<bool>) -> Self

A value that enables guessing of the MIME type for uploaded objects based on file extensions. Set this value to true to enable MIME type guessing, otherwise set to false. The default value is true.

Valid Values: true | false

Source

pub fn get_guess_mime_type_enabled(&self) -> &Option<bool>

A value that enables guessing of the MIME type for uploaded objects based on file extensions. Set this value to true to enable MIME type guessing, otherwise set to false. The default value is true.

Valid Values: true | false

Source

pub fn requester_pays(self, input: bool) -> Self

A value that sets who pays the cost of the request and the cost associated with data download from the S3 bucket. If this value is set to true, the requester pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket owner always pays the cost of storing data.

RequesterPays is a configuration for the S3 bucket that backs the file share, so make sure that the configuration on the file share is the same as the S3 bucket configuration.

Valid Values: true | false

Source

pub fn set_requester_pays(self, input: Option<bool>) -> Self

A value that sets who pays the cost of the request and the cost associated with data download from the S3 bucket. If this value is set to true, the requester pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket owner always pays the cost of storing data.

RequesterPays is a configuration for the S3 bucket that backs the file share, so make sure that the configuration on the file share is the same as the S3 bucket configuration.

Valid Values: true | false

Source

pub fn get_requester_pays(&self) -> &Option<bool>

A value that sets who pays the cost of the request and the cost associated with data download from the S3 bucket. If this value is set to true, the requester pays the costs; otherwise, the S3 bucket owner pays. However, the S3 bucket owner always pays the cost of storing data.

RequesterPays is a configuration for the S3 bucket that backs the file share, so make sure that the configuration on the file share is the same as the S3 bucket configuration.

Valid Values: true | false

Source

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

A list of up to 50 tags that can be assigned to the NFS file share. Each tag is a key-value pair.

Valid characters for key and value are letters, spaces, and numbers representable in UTF-8 format, and the following special characters: + - = . _ : / @. The maximum length of a tag's key is 128 characters, and the maximum length for a tag's value is 256.

Source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

A list of up to 50 tags that can be assigned to the NFS file share. Each tag is a key-value pair.

Valid characters for key and value are letters, spaces, and numbers representable in UTF-8 format, and the following special characters: + - = . _ : / @. The maximum length of a tag's key is 128 characters, and the maximum length for a tag's value is 256.

Source

pub fn get_tags(&self) -> &Option<Vec<Tag>>

A list of up to 50 tags that can be assigned to the NFS file share. Each tag is a key-value pair.

Valid characters for key and value are letters, spaces, and numbers representable in UTF-8 format, and the following special characters: + - = . _ : / @. The maximum length of a tag's key is 128 characters, and the maximum length for a tag's value is 256.

Source

pub fn file_share_name(self, input: impl Into<String>) -> Self

The name of the file share. Optional.

FileShareName must be set if an S3 prefix name is set in LocationARN, or if an access point or access point alias is used.

A valid NFS file share name can only contain the following characters: a-z, A-Z, 0-9, -, ., and _.

Source

pub fn set_file_share_name(self, input: Option<String>) -> Self

The name of the file share. Optional.

FileShareName must be set if an S3 prefix name is set in LocationARN, or if an access point or access point alias is used.

A valid NFS file share name can only contain the following characters: a-z, A-Z, 0-9, -, ., and _.

Source

pub fn get_file_share_name(&self) -> &Option<String>

The name of the file share. Optional.

FileShareName must be set if an S3 prefix name is set in LocationARN, or if an access point or access point alias is used.

A valid NFS file share name can only contain the following characters: a-z, A-Z, 0-9, -, ., and _.

Source

pub fn cache_attributes(self, input: CacheAttributes) -> Self

Specifies refresh cache information for the file share.

Source

pub fn set_cache_attributes(self, input: Option<CacheAttributes>) -> Self

Specifies refresh cache information for the file share.

Source

pub fn get_cache_attributes(&self) -> &Option<CacheAttributes>

Specifies refresh cache information for the file share.

Source

pub fn notification_policy(self, input: impl Into<String>) -> Self

The notification policy of the file share. SettlingTimeInSeconds controls the number of seconds to wait after the last point in time a client wrote to a file before generating an ObjectUploaded notification. Because clients can make many small writes to files, it's best to set this parameter for as long as possible to avoid generating multiple notifications for the same file in a small time period.

SettlingTimeInSeconds has no effect on the timing of the object uploading to Amazon S3, only the timing of the notification.

This setting is not meant to specify an exact time at which the notification will be sent. In some cases, the gateway might require more than the specified delay time to generate and send notifications.

The following example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.

{\"Upload\": {\"SettlingTimeInSeconds\": 60}}

The following example sets NotificationPolicy off.

{}

Source

pub fn set_notification_policy(self, input: Option<String>) -> Self

The notification policy of the file share. SettlingTimeInSeconds controls the number of seconds to wait after the last point in time a client wrote to a file before generating an ObjectUploaded notification. Because clients can make many small writes to files, it's best to set this parameter for as long as possible to avoid generating multiple notifications for the same file in a small time period.

SettlingTimeInSeconds has no effect on the timing of the object uploading to Amazon S3, only the timing of the notification.

This setting is not meant to specify an exact time at which the notification will be sent. In some cases, the gateway might require more than the specified delay time to generate and send notifications.

The following example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.

{\"Upload\": {\"SettlingTimeInSeconds\": 60}}

The following example sets NotificationPolicy off.

{}

Source

pub fn get_notification_policy(&self) -> &Option<String>

The notification policy of the file share. SettlingTimeInSeconds controls the number of seconds to wait after the last point in time a client wrote to a file before generating an ObjectUploaded notification. Because clients can make many small writes to files, it's best to set this parameter for as long as possible to avoid generating multiple notifications for the same file in a small time period.

SettlingTimeInSeconds has no effect on the timing of the object uploading to Amazon S3, only the timing of the notification.

This setting is not meant to specify an exact time at which the notification will be sent. In some cases, the gateway might require more than the specified delay time to generate and send notifications.

The following example sets NotificationPolicy on with SettlingTimeInSeconds set to 60.

{\"Upload\": {\"SettlingTimeInSeconds\": 60}}

The following example sets NotificationPolicy off.

{}

Source

pub fn vpc_endpoint_dns_name(self, input: impl Into<String>) -> Self

Specifies the DNS name for the VPC endpoint that the NFS file share uses to connect to Amazon S3.

This parameter is required for NFS file shares that connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access point alias that points to a VPC access point.

Source

pub fn set_vpc_endpoint_dns_name(self, input: Option<String>) -> Self

Specifies the DNS name for the VPC endpoint that the NFS file share uses to connect to Amazon S3.

This parameter is required for NFS file shares that connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access point alias that points to a VPC access point.

Source

pub fn get_vpc_endpoint_dns_name(&self) -> &Option<String>

Specifies the DNS name for the VPC endpoint that the NFS file share uses to connect to Amazon S3.

This parameter is required for NFS file shares that connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access point alias that points to a VPC access point.

Source

pub fn bucket_region(self, input: impl Into<String>) -> Self

Specifies the Region of the S3 bucket where the NFS file share stores files.

This parameter is required for NFS file shares that connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access point alias that points to a VPC access point.

Source

pub fn set_bucket_region(self, input: Option<String>) -> Self

Specifies the Region of the S3 bucket where the NFS file share stores files.

This parameter is required for NFS file shares that connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access point alias that points to a VPC access point.

Source

pub fn get_bucket_region(&self) -> &Option<String>

Specifies the Region of the S3 bucket where the NFS file share stores files.

This parameter is required for NFS file shares that connect to Amazon S3 through a VPC endpoint, a VPC access point, or an access point alias that points to a VPC access point.

Source

pub fn audit_destination_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the storage used for audit logs.

Source

pub fn set_audit_destination_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the storage used for audit logs.

Source

pub fn get_audit_destination_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the storage used for audit logs.

Source

pub fn build(self) -> Result<CreateNfsFileShareInput, BuildError>

Consumes the builder and constructs a CreateNfsFileShareInput.

Source§

impl CreateNfsFileShareInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<CreateNfsFileShareOutput, SdkError<CreateNFSFileShareError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source§

impl Clone for CreateNfsFileShareInputBuilder

Source§

fn clone(&self) -> CreateNfsFileShareInputBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for CreateNfsFileShareInputBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for CreateNfsFileShareInputBuilder

Source§

fn default() -> CreateNfsFileShareInputBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for CreateNfsFileShareInputBuilder

Source§

fn eq(&self, other: &CreateNfsFileShareInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for CreateNfsFileShareInputBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,