SendCommandFluentBuilder

aws_sdk_ssm::operation::send_command::builders

Struct SendCommandFluentBuilder 

Source 
pub struct SendCommandFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to SendCommand.

Runs commands on one or more managed nodes.

Implementations§

Source§

impl SendCommandFluentBuilder

Source

pub fn as_input(&self) -> &SendCommandInputBuilder

Access the SendCommand as a reference.

Source

pub async fn send( self, ) -> Result<SendCommandOutput, SdkError<SendCommandError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<SendCommandOutput, SendCommandError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn instance_ids(self, input: impl Into<String>) -> Self

Appends an item to InstanceIds.

To override the contents of this collection use set_instance_ids.

The IDs of the managed nodes where the command should run. Specifying managed node IDs is most useful when you are targeting a limited number of managed nodes, though you can specify up to 50 IDs.

To target a larger number of managed nodes, or if you prefer not to list individual node IDs, we recommend using the Targets option instead. Using Targets, which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a send command to tens, hundreds, or thousands of nodes at once.

For more information about how to use targets, see Run commands at scale in the Amazon Web Services Systems Manager User Guide.

Source

pub fn set_instance_ids(self, input: Option<Vec<String>>) -> Self

The IDs of the managed nodes where the command should run. Specifying managed node IDs is most useful when you are targeting a limited number of managed nodes, though you can specify up to 50 IDs.

To target a larger number of managed nodes, or if you prefer not to list individual node IDs, we recommend using the Targets option instead. Using Targets, which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a send command to tens, hundreds, or thousands of nodes at once.

For more information about how to use targets, see Run commands at scale in the Amazon Web Services Systems Manager User Guide.

Source

pub fn get_instance_ids(&self) -> &Option<Vec<String>>

The IDs of the managed nodes where the command should run. Specifying managed node IDs is most useful when you are targeting a limited number of managed nodes, though you can specify up to 50 IDs.

To target a larger number of managed nodes, or if you prefer not to list individual node IDs, we recommend using the Targets option instead. Using Targets, which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a send command to tens, hundreds, or thousands of nodes at once.

For more information about how to use targets, see Run commands at scale in the Amazon Web Services Systems Manager User Guide.

Source

pub fn targets(self, input: Target) -> Self

Appends an item to Targets.

To override the contents of this collection use set_targets.

An array of search criteria that targets managed nodes using a Key,Value combination that you specify. Specifying targets is most useful when you want to send a command to a large number of managed nodes at once. Using Targets, which accepts tag key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands of nodes at once.

To send a command to a smaller number of managed nodes, you can use the InstanceIds option instead.

For more information about how to use targets, see Run commands at scale in the Amazon Web Services Systems Manager User Guide.

Source

pub fn set_targets(self, input: Option<Vec<Target>>) -> Self

An array of search criteria that targets managed nodes using a Key,Value combination that you specify. Specifying targets is most useful when you want to send a command to a large number of managed nodes at once. Using Targets, which accepts tag key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands of nodes at once.

To send a command to a smaller number of managed nodes, you can use the InstanceIds option instead.

For more information about how to use targets, see Run commands at scale in the Amazon Web Services Systems Manager User Guide.

Source

pub fn get_targets(&self) -> &Option<Vec<Target>>

An array of search criteria that targets managed nodes using a Key,Value combination that you specify. Specifying targets is most useful when you want to send a command to a large number of managed nodes at once. Using Targets, which accepts tag key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands of nodes at once.

To send a command to a smaller number of managed nodes, you can use the InstanceIds option instead.

For more information about how to use targets, see Run commands at scale in the Amazon Web Services Systems Manager User Guide.

Source

pub fn document_name(self, input: impl Into<String>) -> Self

The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a custom document. To run a shared document belonging to another account, specify the document Amazon Resource Name (ARN). For more information about how to use shared documents, see Sharing SSM documents in the Amazon Web Services Systems Manager User Guide.

If you specify a document name or ARN that hasn't been shared with your account, you receive an InvalidDocument error.

Source

pub fn set_document_name(self, input: Option<String>) -> Self

The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a custom document. To run a shared document belonging to another account, specify the document Amazon Resource Name (ARN). For more information about how to use shared documents, see Sharing SSM documents in the Amazon Web Services Systems Manager User Guide.

If you specify a document name or ARN that hasn't been shared with your account, you receive an InvalidDocument error.

Source

pub fn get_document_name(&self) -> &Option<String>

The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a custom document. To run a shared document belonging to another account, specify the document Amazon Resource Name (ARN). For more information about how to use shared documents, see Sharing SSM documents in the Amazon Web Services Systems Manager User Guide.

If you specify a document name or ARN that hasn't been shared with your account, you receive an InvalidDocument error.

Source

pub fn document_version(self, input: impl Into<String>) -> Self

The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then you must escape the first two options by using a backslash. If you specify a version number, then you don't need to use the backslash. For example:

--document-version "\$DEFAULT"

--document-version "\$LATEST"

--document-version "3"

Source

pub fn set_document_version(self, input: Option<String>) -> Self

The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then you must escape the first two options by using a backslash. If you specify a version number, then you don't need to use the backslash. For example:

--document-version "\$DEFAULT"

--document-version "\$LATEST"

--document-version "3"

Source

pub fn get_document_version(&self) -> &Option<String>

The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then you must escape the first two options by using a backslash. If you specify a version number, then you don't need to use the backslash. For example:

--document-version "\$DEFAULT"

--document-version "\$LATEST"

--document-version "3"

Source

pub fn document_hash(self, input: impl Into<String>) -> Self

The Sha256 or Sha1 hash created by the system when the document was created.

Sha1 hashes have been deprecated.

Source

pub fn set_document_hash(self, input: Option<String>) -> Self

The Sha256 or Sha1 hash created by the system when the document was created.

Sha1 hashes have been deprecated.

Source

pub fn get_document_hash(&self) -> &Option<String>

The Sha256 or Sha1 hash created by the system when the document was created.

Sha1 hashes have been deprecated.

Source

pub fn document_hash_type(self, input: DocumentHashType) -> Self

Sha256 or Sha1.

Sha1 hashes have been deprecated.

Source

pub fn set_document_hash_type(self, input: Option<DocumentHashType>) -> Self

Sha256 or Sha1.

Sha1 hashes have been deprecated.

Source

pub fn get_document_hash_type(&self) -> &Option<DocumentHashType>

Sha256 or Sha1.

Sha1 hashes have been deprecated.

Source

pub fn timeout_seconds(self, input: i32) -> Self

If this time is reached and the command hasn't already started running, it won't run.

Source

pub fn set_timeout_seconds(self, input: Option<i32>) -> Self

If this time is reached and the command hasn't already started running, it won't run.

Source

pub fn get_timeout_seconds(&self) -> &Option<i32>

If this time is reached and the command hasn't already started running, it won't run.

Source

pub fn comment(self, input: impl Into<String>) -> Self

User-specified information about the command, such as a brief description of what the command should do.

Source

pub fn set_comment(self, input: Option<String>) -> Self

User-specified information about the command, such as a brief description of what the command should do.

Source

pub fn get_comment(&self) -> &Option<String>

User-specified information about the command, such as a brief description of what the command should do.

Source

pub fn parameters(self, k: impl Into<String>, v: Vec<String>) -> Self

Adds a key-value pair to Parameters.

To override the contents of this collection use set_parameters.

The required and optional parameters specified in the document being run.

Source

pub fn set_parameters(self, input: Option<HashMap<String, Vec<String>>>) -> Self

The required and optional parameters specified in the document being run.

Source

pub fn get_parameters(&self) -> &Option<HashMap<String, Vec<String>>>

The required and optional parameters specified in the document being run.

Source

pub fn output_s3_region(self, input: impl Into<String>) -> Self

(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager automatically determines the Amazon Web Services Region of the S3 bucket.

Source

pub fn set_output_s3_region(self, input: Option<String>) -> Self

(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager automatically determines the Amazon Web Services Region of the S3 bucket.

Source

pub fn get_output_s3_region(&self) -> &Option<String>

(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager automatically determines the Amazon Web Services Region of the S3 bucket.

Source

pub fn output_s3_bucket_name(self, input: impl Into<String>) -> Self

The name of the S3 bucket where command execution responses should be stored.

Source

pub fn set_output_s3_bucket_name(self, input: Option<String>) -> Self

The name of the S3 bucket where command execution responses should be stored.

Source

pub fn get_output_s3_bucket_name(&self) -> &Option<String>

The name of the S3 bucket where command execution responses should be stored.

Source

pub fn output_s3_key_prefix(self, input: impl Into<String>) -> Self

The directory structure within the S3 bucket where the responses should be stored.

Source

pub fn set_output_s3_key_prefix(self, input: Option<String>) -> Self

The directory structure within the S3 bucket where the responses should be stored.

Source

pub fn get_output_s3_key_prefix(&self) -> &Option<String>

The directory structure within the S3 bucket where the responses should be stored.

Source

pub fn max_concurrency(self, input: impl Into<String>) -> Self

(Optional) The maximum number of managed nodes that are allowed to run the command at the same time. You can specify a number such as 10 or a percentage such as 10%. The default value is 50. For more information about how to use MaxConcurrency, see Using concurrency controls in the Amazon Web Services Systems Manager User Guide.

Source

pub fn set_max_concurrency(self, input: Option<String>) -> Self

(Optional) The maximum number of managed nodes that are allowed to run the command at the same time. You can specify a number such as 10 or a percentage such as 10%. The default value is 50. For more information about how to use MaxConcurrency, see Using concurrency controls in the Amazon Web Services Systems Manager User Guide.

Source

pub fn get_max_concurrency(&self) -> &Option<String>

(Optional) The maximum number of managed nodes that are allowed to run the command at the same time. You can specify a number such as 10 or a percentage such as 10%. The default value is 50. For more information about how to use MaxConcurrency, see Using concurrency controls in the Amazon Web Services Systems Manager User Guide.

Source

pub fn max_errors(self, input: impl Into<String>) -> Self

The maximum number of errors allowed without the command failing. When the command fails one more time beyond the value of MaxErrors, the systems stops sending the command to additional targets. You can specify a number like 10 or a percentage like 10%. The default value is 0. For more information about how to use MaxErrors, see Using error controls in the Amazon Web Services Systems Manager User Guide.

Source

pub fn set_max_errors(self, input: Option<String>) -> Self

The maximum number of errors allowed without the command failing. When the command fails one more time beyond the value of MaxErrors, the systems stops sending the command to additional targets. You can specify a number like 10 or a percentage like 10%. The default value is 0. For more information about how to use MaxErrors, see Using error controls in the Amazon Web Services Systems Manager User Guide.

Source

pub fn get_max_errors(&self) -> &Option<String>

The maximum number of errors allowed without the command failing. When the command fails one more time beyond the value of MaxErrors, the systems stops sending the command to additional targets. You can specify a number like 10 or a percentage like 10%. The default value is 0. For more information about how to use MaxErrors, see Using error controls in the Amazon Web Services Systems Manager User Guide.

Source

pub fn service_role_arn(self, input: impl Into<String>) -> Self

The ARN of the Identity and Access Management (IAM) service role to use to publish Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.

This role must provide the sns:Publish permission for your notification topic. For information about creating and using this service role, see Monitoring Systems Manager status changes using Amazon SNS notifications in the Amazon Web Services Systems Manager User Guide.

Source

pub fn set_service_role_arn(self, input: Option<String>) -> Self

The ARN of the Identity and Access Management (IAM) service role to use to publish Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.

This role must provide the sns:Publish permission for your notification topic. For information about creating and using this service role, see Monitoring Systems Manager status changes using Amazon SNS notifications in the Amazon Web Services Systems Manager User Guide.

Source

pub fn get_service_role_arn(&self) -> &Option<String>

The ARN of the Identity and Access Management (IAM) service role to use to publish Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.

This role must provide the sns:Publish permission for your notification topic. For information about creating and using this service role, see Monitoring Systems Manager status changes using Amazon SNS notifications in the Amazon Web Services Systems Manager User Guide.

Source

pub fn notification_config(self, input: NotificationConfig) -> Self

Configurations for sending notifications.

Source

pub fn set_notification_config(self, input: Option<NotificationConfig>) -> Self

Configurations for sending notifications.

Source

pub fn get_notification_config(&self) -> &Option<NotificationConfig>

Configurations for sending notifications.

Source

pub fn cloud_watch_output_config(self, input: CloudWatchOutputConfig) -> Self

Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a tool in Amazon Web Services Systems Manager.

Source

pub fn set_cloud_watch_output_config( self, input: Option<CloudWatchOutputConfig>, ) -> Self

Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a tool in Amazon Web Services Systems Manager.

Source

pub fn get_cloud_watch_output_config(&self) -> &Option<CloudWatchOutputConfig>

Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a tool in Amazon Web Services Systems Manager.

Source

pub fn alarm_configuration(self, input: AlarmConfiguration) -> Self

The CloudWatch alarm you want to apply to your command.

Source

pub fn set_alarm_configuration(self, input: Option<AlarmConfiguration>) -> Self

The CloudWatch alarm you want to apply to your command.

Source

pub fn get_alarm_configuration(&self) -> &Option<AlarmConfiguration>

The CloudWatch alarm you want to apply to your command.

Trait Implementations§

Source§

impl Clone for SendCommandFluentBuilder

Source§

fn clone(&self) -> SendCommandFluentBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for SendCommandFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,