pub struct DescribeParametersFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to DescribeParameters.
Lists the parameters in your Amazon Web Services account or the parameters shared with you when you enable the Shared option.
Request results are returned on a best-effort basis. If you specify MaxResults in the request, the response includes information up to the limit specified. The number of items returned, however, can be between zero and the value of MaxResults. If the service reaches an internal limit while processing the results, it stops the operation and returns the matching values up to that point and a NextToken. You can specify the NextToken in a subsequent call to get the next set of results.
Parameter names can't contain spaces. The service removes any spaces specified for the beginning or end of a parameter name. If the specified name for a parameter contains spaces between characters, the request fails with a ValidationException error.
If you change the KMS key alias for the KMS key used to encrypt a parameter, then you must also update the key alias the parameter uses to reference KMS. Otherwise, DescribeParameters retrieves whatever the original key alias was referencing.
Implementations§
Source§impl DescribeParametersFluentBuilder
impl DescribeParametersFluentBuilder
Sourcepub fn as_input(&self) -> &DescribeParametersInputBuilder
pub fn as_input(&self) -> &DescribeParametersInputBuilder
Access the DescribeParameters as a reference.
Sourcepub async fn send(
self,
) -> Result<DescribeParametersOutput, SdkError<DescribeParametersError, HttpResponse>>
pub async fn send( self, ) -> Result<DescribeParametersOutput, SdkError<DescribeParametersError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DescribeParametersOutput, DescribeParametersError, Self>
pub fn customize( self, ) -> CustomizableOperation<DescribeParametersOutput, DescribeParametersError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> DescribeParametersPaginator
pub fn into_paginator(self) -> DescribeParametersPaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn filters(self, input: ParametersFilter) -> Self
pub fn filters(self, input: ParametersFilter) -> Self
Appends an item to Filters.
To override the contents of this collection use set_filters.
This data type is deprecated. Instead, use ParameterFilters.
Sourcepub fn set_filters(self, input: Option<Vec<ParametersFilter>>) -> Self
pub fn set_filters(self, input: Option<Vec<ParametersFilter>>) -> Self
This data type is deprecated. Instead, use ParameterFilters.
Sourcepub fn get_filters(&self) -> &Option<Vec<ParametersFilter>>
pub fn get_filters(&self) -> &Option<Vec<ParametersFilter>>
This data type is deprecated. Instead, use ParameterFilters.
Sourcepub fn parameter_filters(self, input: ParameterStringFilter) -> Self
pub fn parameter_filters(self, input: ParameterStringFilter) -> Self
Appends an item to ParameterFilters.
To override the contents of this collection use set_parameter_filters.
Filters to limit the request results.
Sourcepub fn set_parameter_filters(
self,
input: Option<Vec<ParameterStringFilter>>,
) -> Self
pub fn set_parameter_filters( self, input: Option<Vec<ParameterStringFilter>>, ) -> Self
Filters to limit the request results.
Sourcepub fn get_parameter_filters(&self) -> &Option<Vec<ParameterStringFilter>>
pub fn get_parameter_filters(&self) -> &Option<Vec<ParameterStringFilter>>
Filters to limit the request results.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of items to return for this call. The call also returns a token that you can specify in a subsequent call to get the next set of results.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of items to return for this call. The call also returns a token that you can specify in a subsequent call to get the next set of results.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of items to return for this call. The call also returns a token that you can specify in a subsequent call to get the next set of results.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The token for the next set of items to return. (You received this token from a previous call.)
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The token for the next set of items to return. (You received this token from a previous call.)
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The token for the next set of items to return. (You received this token from a previous call.)
Lists parameters that are shared with you.
By default when using this option, the command returns parameters that have been shared using a standard Resource Access Manager Resource Share. In order for a parameter that was shared using the PutResourcePolicy command to be returned, the associated RAM Resource Share Created From Policy must have been promoted to a standard Resource Share using the RAM PromoteResourceShareCreatedFromPolicy API operation.
For more information about sharing parameters, see Working with shared parameters in the Amazon Web Services Systems Manager User Guide.
Lists parameters that are shared with you.
By default when using this option, the command returns parameters that have been shared using a standard Resource Access Manager Resource Share. In order for a parameter that was shared using the PutResourcePolicy command to be returned, the associated RAM Resource Share Created From Policy must have been promoted to a standard Resource Share using the RAM PromoteResourceShareCreatedFromPolicy API operation.
For more information about sharing parameters, see Working with shared parameters in the Amazon Web Services Systems Manager User Guide.
Lists parameters that are shared with you.
By default when using this option, the command returns parameters that have been shared using a standard Resource Access Manager Resource Share. In order for a parameter that was shared using the PutResourcePolicy command to be returned, the associated RAM Resource Share Created From Policy must have been promoted to a standard Resource Share using the RAM PromoteResourceShareCreatedFromPolicy API operation.
For more information about sharing parameters, see Working with shared parameters in the Amazon Web Services Systems Manager User Guide.
Trait Implementations§
Source§impl Clone for DescribeParametersFluentBuilder
impl Clone for DescribeParametersFluentBuilder
Source§fn clone(&self) -> DescribeParametersFluentBuilder
fn clone(&self) -> DescribeParametersFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for DescribeParametersFluentBuilder
impl !RefUnwindSafe for DescribeParametersFluentBuilder
impl Send for DescribeParametersFluentBuilder
impl Sync for DescribeParametersFluentBuilder
impl Unpin for DescribeParametersFluentBuilder
impl !UnwindSafe for DescribeParametersFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);