Struct aws_sdk_ssm::client::fluent_builders::UpdateMaintenanceWindowTask

pub struct UpdateMaintenanceWindowTask<C = DynConnector, M = DefaultMiddleware, R = Standard> { /* private fields */ }

Fluent builder constructing a request to UpdateMaintenanceWindowTask.

Modifies a task assigned to a maintenance window. You can't change the task type, but you can change the following values:

• TaskARN. For example, you can change a RUN_COMMAND task from AWS-RunPowerShellScript to AWS-RunShellScript.

• ServiceRoleArn

• TaskInvocationParameters

• Priority

• MaxConcurrency

• MaxErrors

One or more targets must be specified for maintenance window Run Command-type tasks. Depending on the task, targets are optional for other maintenance window task types (Automation, Lambda, and Step Functions). For more information about running tasks that don't specify targets, see Registering maintenance window tasks without targets in the Amazon Web Services Systems Manager User Guide.

If the value for a parameter in UpdateMaintenanceWindowTask is null, then the corresponding field isn't modified. If you set Replace to true, then all fields required by the RegisterTaskWithMaintenanceWindow operation are required for this request. Optional fields that aren't specified are set to null.

When you update a maintenance window task that has options specified in TaskInvocationParameters, you must provide again all the TaskInvocationParameters values that you want to retain. The values you don't specify again are removed. For example, suppose that when you registered a Run Command task, you specified TaskInvocationParameters values for Comment, NotificationConfig, and OutputS3BucketName. If you update the maintenance window task and specify only a different OutputS3BucketName value, the values for Comment and NotificationConfig are removed.

Implementations

impl<C, M, R> UpdateMaintenanceWindowTask<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(
    self
) -> Result<UpdateMaintenanceWindowTaskOutput, SdkError<UpdateMaintenanceWindowTaskError>> where
    R::Policy: SmithyRetryPolicy<UpdateMaintenanceWindowTaskInputOperationOutputAlias, UpdateMaintenanceWindowTaskOutput, UpdateMaintenanceWindowTaskError, UpdateMaintenanceWindowTaskInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn window_id(self, input: impl Into<String>) -> Self

The maintenance window ID that contains the task to modify.

pub fn set_window_id(self, input: Option<String>) -> Self

The maintenance window ID that contains the task to modify.

pub fn window_task_id(self, input: impl Into<String>) -> Self

The task ID to modify.

pub fn set_window_task_id(self, input: Option<String>) -> Self

The task ID to modify.

pub fn targets(self, input: Target) -> Self

Appends an item to Targets.

To override the contents of this collection use set_targets.

The targets (either managed nodes or tags) to modify. Managed nodes are specified using the format Key=instanceids,Values=instanceID_1,instanceID_2. Tags are specified using the format Key=tag_name,Values=tag_value.

One or more targets must be specified for maintenance window Run Command-type tasks. Depending on the task, targets are optional for other maintenance window task types (Automation, Lambda, and Step Functions). For more information about running tasks that don't specify targets, see Registering maintenance window tasks without targets in the Amazon Web Services Systems Manager User Guide.

pub fn set_targets(self, input: Option<Vec<Target>>) -> Self

The targets (either managed nodes or tags) to modify. Managed nodes are specified using the format Key=instanceids,Values=instanceID_1,instanceID_2. Tags are specified using the format Key=tag_name,Values=tag_value.

One or more targets must be specified for maintenance window Run Command-type tasks. Depending on the task, targets are optional for other maintenance window task types (Automation, Lambda, and Step Functions). For more information about running tasks that don't specify targets, see Registering maintenance window tasks without targets in the Amazon Web Services Systems Manager User Guide.

pub fn task_arn(self, input: impl Into<String>) -> Self

The task ARN to modify.

pub fn set_task_arn(self, input: Option<String>) -> Self

The task ARN to modify.

pub fn service_role_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the IAM service role for Amazon Web Services Systems Manager to assume when running a maintenance window task. If you do not specify a service role ARN, Systems Manager uses your account's service-linked role. If no service-linked role for Systems Manager exists in your account, it is created when you run RegisterTaskWithMaintenanceWindow.

For more information, see the following topics in the in the Amazon Web Services Systems Manager User Guide:

• Using service-linked roles for Systems Manager

• Should I use a service-linked role or a custom service role to run maintenance window tasks?

pub fn set_service_role_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the IAM service role for Amazon Web Services Systems Manager to assume when running a maintenance window task. If you do not specify a service role ARN, Systems Manager uses your account's service-linked role. If no service-linked role for Systems Manager exists in your account, it is created when you run RegisterTaskWithMaintenanceWindow.

For more information, see the following topics in the in the Amazon Web Services Systems Manager User Guide:

• Using service-linked roles for Systems Manager

• Should I use a service-linked role or a custom service role to run maintenance window tasks?

pub fn task_parameters(
    self,
    k: impl Into<String>,
    v: MaintenanceWindowTaskParameterValueExpression
) -> Self

Adds a key-value pair to TaskParameters.

To override the contents of this collection use set_task_parameters.

The parameters to modify.

TaskParameters has been deprecated. To specify parameters to pass to a task when it runs, instead use the Parameters option in the TaskInvocationParameters structure. For information about how Systems Manager handles these options for the supported maintenance window task types, see MaintenanceWindowTaskInvocationParameters.

The map has the following format:

Key: string, between 1 and 255 characters

Value: an array of strings, each string is between 1 and 255 characters

pub fn set_task_parameters(
    self,
    input: Option<HashMap<String, MaintenanceWindowTaskParameterValueExpression>>
) -> Self

The parameters to modify.

TaskParameters has been deprecated. To specify parameters to pass to a task when it runs, instead use the Parameters option in the TaskInvocationParameters structure. For information about how Systems Manager handles these options for the supported maintenance window task types, see MaintenanceWindowTaskInvocationParameters.

The map has the following format:

Key: string, between 1 and 255 characters

Value: an array of strings, each string is between 1 and 255 characters

pub fn task_invocation_parameters(
    self,
    input: MaintenanceWindowTaskInvocationParameters
) -> Self

The parameters that the task should use during execution. Populate only the fields that match the task type. All other fields should be empty.

When you update a maintenance window task that has options specified in TaskInvocationParameters, you must provide again all the TaskInvocationParameters values that you want to retain. The values you don't specify again are removed. For example, suppose that when you registered a Run Command task, you specified TaskInvocationParameters values for Comment, NotificationConfig, and OutputS3BucketName. If you update the maintenance window task and specify only a different OutputS3BucketName value, the values for Comment and NotificationConfig are removed.

pub fn set_task_invocation_parameters(
    self,
    input: Option<MaintenanceWindowTaskInvocationParameters>
) -> Self

The parameters that the task should use during execution. Populate only the fields that match the task type. All other fields should be empty.

When you update a maintenance window task that has options specified in TaskInvocationParameters, you must provide again all the TaskInvocationParameters values that you want to retain. The values you don't specify again are removed. For example, suppose that when you registered a Run Command task, you specified TaskInvocationParameters values for Comment, NotificationConfig, and OutputS3BucketName. If you update the maintenance window task and specify only a different OutputS3BucketName value, the values for Comment and NotificationConfig are removed.

pub fn priority(self, input: i32) -> Self

The new task priority to specify. The lower the number, the higher the priority. Tasks that have the same priority are scheduled in parallel.

pub fn set_priority(self, input: Option<i32>) -> Self

The new task priority to specify. The lower the number, the higher the priority. Tasks that have the same priority are scheduled in parallel.

pub fn max_concurrency(self, input: impl Into<String>) -> Self

The new MaxConcurrency value you want to specify. MaxConcurrency is the number of targets that are allowed to run this task in parallel.

For maintenance window tasks without a target specified, you can't supply a value for this option. Instead, the system inserts a placeholder value of 1, which may be reported in the response to this command. This value doesn't affect the running of your task and can be ignored.

pub fn set_max_concurrency(self, input: Option<String>) -> Self

The new MaxConcurrency value you want to specify. MaxConcurrency is the number of targets that are allowed to run this task in parallel.

For maintenance window tasks without a target specified, you can't supply a value for this option. Instead, the system inserts a placeholder value of 1, which may be reported in the response to this command. This value doesn't affect the running of your task and can be ignored.

pub fn max_errors(self, input: impl Into<String>) -> Self

The new MaxErrors value to specify. MaxErrors is the maximum number of errors that are allowed before the task stops being scheduled.

For maintenance window tasks without a target specified, you can't supply a value for this option. Instead, the system inserts a placeholder value of 1, which may be reported in the response to this command. This value doesn't affect the running of your task and can be ignored.

pub fn set_max_errors(self, input: Option<String>) -> Self

The new MaxErrors value to specify. MaxErrors is the maximum number of errors that are allowed before the task stops being scheduled.

For maintenance window tasks without a target specified, you can't supply a value for this option. Instead, the system inserts a placeholder value of 1, which may be reported in the response to this command. This value doesn't affect the running of your task and can be ignored.

pub fn logging_info(self, input: LoggingInfo) -> Self

The new logging location in Amazon S3 to specify.

LoggingInfo has been deprecated. To specify an Amazon Simple Storage Service (Amazon S3) bucket to contain logs, instead use the OutputS3BucketName and OutputS3KeyPrefix options in the TaskInvocationParameters structure. For information about how Amazon Web Services Systems Manager handles these options for the supported maintenance window task types, see MaintenanceWindowTaskInvocationParameters.

pub fn set_logging_info(self, input: Option<LoggingInfo>) -> Self

The new logging location in Amazon S3 to specify.

LoggingInfo has been deprecated. To specify an Amazon Simple Storage Service (Amazon S3) bucket to contain logs, instead use the OutputS3BucketName and OutputS3KeyPrefix options in the TaskInvocationParameters structure. For information about how Amazon Web Services Systems Manager handles these options for the supported maintenance window task types, see MaintenanceWindowTaskInvocationParameters.

pub fn name(self, input: impl Into<String>) -> Self

The new task name to specify.

pub fn set_name(self, input: Option<String>) -> Self

The new task name to specify.

pub fn description(self, input: impl Into<String>) -> Self

The new task description to specify.

pub fn set_description(self, input: Option<String>) -> Self

The new task description to specify.

pub fn replace(self, input: bool) -> Self

If True, then all fields that are required by the RegisterTaskWithMaintenanceWindow operation are also required for this API request. Optional fields that aren't specified are set to null.

pub fn set_replace(self, input: Option<bool>) -> Self

If True, then all fields that are required by the RegisterTaskWithMaintenanceWindow operation are also required for this API request. Optional fields that aren't specified are set to null.

pub fn cutoff_behavior(self, input: MaintenanceWindowTaskCutoffBehavior) -> Self

Indicates whether tasks should continue to run after the cutoff time specified in the maintenance windows is reached.

• CONTINUE_TASK: When the cutoff time is reached, any tasks that are running continue. The default value.

• CANCEL_TASK:

  • For Automation, Lambda, Step Functions tasks: When the cutoff time is reached, any task invocations that are already running continue, but no new task invocations are started.

  • For Run Command tasks: When the cutoff time is reached, the system sends a CancelCommand operation that attempts to cancel the command associated with the task. However, there is no guarantee that the command will be terminated and the underlying process stopped.

  The status for tasks that are not completed is TIMED_OUT.

pub fn set_cutoff_behavior(
    self,
    input: Option<MaintenanceWindowTaskCutoffBehavior>
) -> Self

Indicates whether tasks should continue to run after the cutoff time specified in the maintenance windows is reached.

• CONTINUE_TASK: When the cutoff time is reached, any tasks that are running continue. The default value.

• CANCEL_TASK:

  • For Automation, Lambda, Step Functions tasks: When the cutoff time is reached, any task invocations that are already running continue, but no new task invocations are started.

  • For Run Command tasks: When the cutoff time is reached, the system sends a CancelCommand operation that attempts to cancel the command associated with the task. However, there is no guarantee that the command will be terminated and the underlying process stopped.

  The status for tasks that are not completed is TIMED_OUT.

Trait Implementations

impl<C: Clone, M: Clone, R: Clone> Clone for UpdateMaintenanceWindowTask<C, M, R>

fn clone(&self) -> UpdateMaintenanceWindowTask<C, M, R>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for UpdateMaintenanceWindowTask<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.