Struct aws_sdk_ssm::client::fluent_builders::SendCommand

pub struct SendCommand<C = DynConnector, M = DefaultMiddleware, R = Standard> { /* private fields */ }

Fluent builder constructing a request to SendCommand.

Runs commands on one or more managed nodes.

Implementations

impl<C, M, R> SendCommand<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(self) -> Result<SendCommandOutput, SdkError<SendCommandError>> where
    R::Policy: SmithyRetryPolicy<SendCommandInputOperationOutputAlias, SendCommandOutput, SendCommandError, SendCommandInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn instance_ids(self, input: impl Into<String>) -> Self

Appends an item to InstanceIds.

To override the contents of this collection use set_instance_ids.

The IDs of the managed nodes where the command should run. Specifying managed node IDs is most useful when you are targeting a limited number of managed nodes, though you can specify up to 50 IDs.

To target a larger number of managed nodes, or if you prefer not to list individual node IDs, we recommend using the Targets option instead. Using Targets, which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a send command to tens, hundreds, or thousands of nodes at once.

For more information about how to use targets, see Using targets and rate controls to send commands to a fleet in the Amazon Web Services Systems Manager User Guide.

pub fn set_instance_ids(self, input: Option<Vec<String>>) -> Self

The IDs of the managed nodes where the command should run. Specifying managed node IDs is most useful when you are targeting a limited number of managed nodes, though you can specify up to 50 IDs.

To target a larger number of managed nodes, or if you prefer not to list individual node IDs, we recommend using the Targets option instead. Using Targets, which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a send command to tens, hundreds, or thousands of nodes at once.

For more information about how to use targets, see Using targets and rate controls to send commands to a fleet in the Amazon Web Services Systems Manager User Guide.

pub fn targets(self, input: Target) -> Self

Appends an item to Targets.

To override the contents of this collection use set_targets.

An array of search criteria that targets managed nodes using a Key,Value combination that you specify. Specifying targets is most useful when you want to send a command to a large number of managed nodes at once. Using Targets, which accepts tag key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands of nodes at once.

To send a command to a smaller number of managed nodes, you can use the InstanceIds option instead.

For more information about how to use targets, see Sending commands to a fleet in the Amazon Web Services Systems Manager User Guide.

pub fn set_targets(self, input: Option<Vec<Target>>) -> Self

An array of search criteria that targets managed nodes using a Key,Value combination that you specify. Specifying targets is most useful when you want to send a command to a large number of managed nodes at once. Using Targets, which accepts tag key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands of nodes at once.

To send a command to a smaller number of managed nodes, you can use the InstanceIds option instead.

For more information about how to use targets, see Sending commands to a fleet in the Amazon Web Services Systems Manager User Guide.

pub fn document_name(self, input: impl Into<String>) -> Self

The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a custom document. To run a shared document belonging to another account, specify the document Amazon Resource Name (ARN). For more information about how to use shared documents, see Using shared SSM documents in the Amazon Web Services Systems Manager User Guide.

If you specify a document name or ARN that hasn't been shared with your account, you receive an InvalidDocument error.

pub fn set_document_name(self, input: Option<String>) -> Self

The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a custom document. To run a shared document belonging to another account, specify the document Amazon Resource Name (ARN). For more information about how to use shared documents, see Using shared SSM documents in the Amazon Web Services Systems Manager User Guide.

If you specify a document name or ARN that hasn't been shared with your account, you receive an InvalidDocument error.

pub fn document_version(self, input: impl Into<String>) -> Self

The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then you must escape the first two options by using a backslash. If you specify a version number, then you don't need to use the backslash. For example:

--document-version "\$DEFAULT"

--document-version "\$LATEST"

--document-version "3"

pub fn set_document_version(self, input: Option<String>) -> Self

The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then you must escape the first two options by using a backslash. If you specify a version number, then you don't need to use the backslash. For example:

--document-version "\$DEFAULT"

--document-version "\$LATEST"

--document-version "3"

pub fn document_hash(self, input: impl Into<String>) -> Self

The Sha256 or Sha1 hash created by the system when the document was created.

Sha1 hashes have been deprecated.

pub fn set_document_hash(self, input: Option<String>) -> Self

The Sha256 or Sha1 hash created by the system when the document was created.

Sha1 hashes have been deprecated.

pub fn document_hash_type(self, input: DocumentHashType) -> Self

Sha256 or Sha1.

Sha1 hashes have been deprecated.

pub fn set_document_hash_type(self, input: Option<DocumentHashType>) -> Self

Sha256 or Sha1.

Sha1 hashes have been deprecated.

pub fn timeout_seconds(self, input: i32) -> Self

If this time is reached and the command hasn't already started running, it won't run.

pub fn set_timeout_seconds(self, input: Option<i32>) -> Self

If this time is reached and the command hasn't already started running, it won't run.

pub fn comment(self, input: impl Into<String>) -> Self

User-specified information about the command, such as a brief description of what the command should do.

pub fn set_comment(self, input: Option<String>) -> Self

User-specified information about the command, such as a brief description of what the command should do.

pub fn parameters(self, k: impl Into<String>, v: Vec<String>) -> Self

Adds a key-value pair to Parameters.

To override the contents of this collection use set_parameters.

The required and optional parameters specified in the document being run.

pub fn set_parameters(self, input: Option<HashMap<String, Vec<String>>>) -> Self

The required and optional parameters specified in the document being run.

pub fn output_s3_region(self, input: impl Into<String>) -> Self

(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager automatically determines the Amazon Web Services Region of the S3 bucket.

pub fn set_output_s3_region(self, input: Option<String>) -> Self

(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager automatically determines the Amazon Web Services Region of the S3 bucket.

pub fn output_s3_bucket_name(self, input: impl Into<String>) -> Self

The name of the S3 bucket where command execution responses should be stored.

pub fn set_output_s3_bucket_name(self, input: Option<String>) -> Self

The name of the S3 bucket where command execution responses should be stored.

pub fn output_s3_key_prefix(self, input: impl Into<String>) -> Self

The directory structure within the S3 bucket where the responses should be stored.

pub fn set_output_s3_key_prefix(self, input: Option<String>) -> Self

The directory structure within the S3 bucket where the responses should be stored.

pub fn max_concurrency(self, input: impl Into<String>) -> Self

(Optional) The maximum number of managed nodes that are allowed to run the command at the same time. You can specify a number such as 10 or a percentage such as 10%. The default value is 50. For more information about how to use MaxConcurrency, see Using concurrency controls in the Amazon Web Services Systems Manager User Guide.

pub fn set_max_concurrency(self, input: Option<String>) -> Self

(Optional) The maximum number of managed nodes that are allowed to run the command at the same time. You can specify a number such as 10 or a percentage such as 10%. The default value is 50. For more information about how to use MaxConcurrency, see Using concurrency controls in the Amazon Web Services Systems Manager User Guide.

pub fn max_errors(self, input: impl Into<String>) -> Self

The maximum number of errors allowed without the command failing. When the command fails one more time beyond the value of MaxErrors, the systems stops sending the command to additional targets. You can specify a number like 10 or a percentage like 10%. The default value is 0. For more information about how to use MaxErrors, see Using error controls in the Amazon Web Services Systems Manager User Guide.

pub fn set_max_errors(self, input: Option<String>) -> Self

The maximum number of errors allowed without the command failing. When the command fails one more time beyond the value of MaxErrors, the systems stops sending the command to additional targets. You can specify a number like 10 or a percentage like 10%. The default value is 0. For more information about how to use MaxErrors, see Using error controls in the Amazon Web Services Systems Manager User Guide.

pub fn service_role_arn(self, input: impl Into<String>) -> Self

The ARN of the Identity and Access Management (IAM) service role to use to publish Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.

pub fn set_service_role_arn(self, input: Option<String>) -> Self

The ARN of the Identity and Access Management (IAM) service role to use to publish Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.

pub fn notification_config(self, input: NotificationConfig) -> Self

Configurations for sending notifications.

pub fn set_notification_config(self, input: Option<NotificationConfig>) -> Self

Configurations for sending notifications.

pub fn cloud_watch_output_config(self, input: CloudWatchOutputConfig) -> Self

Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a capability of Amazon Web Services Systems Manager.

pub fn set_cloud_watch_output_config(
    self,
    input: Option<CloudWatchOutputConfig>
) -> Self

Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a capability of Amazon Web Services Systems Manager.

Trait Implementations

impl<C: Clone, M: Clone, R: Clone> Clone for SendCommand<C, M, R>

fn clone(&self) -> SendCommand<C, M, R>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for SendCommand<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.