Struct aws_sdk_ssm::operation::update_patch_baseline::builders::UpdatePatchBaselineFluentBuilder

pub struct UpdatePatchBaselineFluentBuilder { /* private fields */ }

Fluent builder constructing a request to UpdatePatchBaseline.

Modifies an existing patch baseline. Fields not specified in the request are left unchanged.

For information about valid key-value pairs in PatchFilters for each supported operating system type, see PatchFilter.

Implementations

impl UpdatePatchBaselineFluentBuilder

pub fn as_input(&self) -> &UpdatePatchBaselineInputBuilder

Access the UpdatePatchBaseline as a reference.

pub async fn send( self ) -> Result<UpdatePatchBaselineOutput, SdkError<UpdatePatchBaselineError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub async fn customize( self ) -> Result<CustomizableOperation<UpdatePatchBaselineOutput, UpdatePatchBaselineError, Self>, SdkError<UpdatePatchBaselineError>>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn baseline_id(self, input: impl Into<String>) -> Self

The ID of the patch baseline to update.

pub fn set_baseline_id(self, input: Option<String>) -> Self

The ID of the patch baseline to update.

pub fn get_baseline_id(&self) -> &Option<String>

The ID of the patch baseline to update.

pub fn name(self, input: impl Into<String>) -> Self

The name of the patch baseline.

pub fn set_name(self, input: Option<String>) -> Self

The name of the patch baseline.

pub fn get_name(&self) -> &Option<String>

The name of the patch baseline.

pub fn global_filters(self, input: PatchFilterGroup) -> Self

A set of global filters used to include patches in the baseline.

pub fn set_global_filters(self, input: Option<PatchFilterGroup>) -> Self

A set of global filters used to include patches in the baseline.

pub fn get_global_filters(&self) -> &Option<PatchFilterGroup>

A set of global filters used to include patches in the baseline.

pub fn approval_rules(self, input: PatchRuleGroup) -> Self

A set of rules used to include patches in the baseline.

pub fn set_approval_rules(self, input: Option<PatchRuleGroup>) -> Self

A set of rules used to include patches in the baseline.

pub fn get_approval_rules(&self) -> &Option<PatchRuleGroup>

A set of rules used to include patches in the baseline.

pub fn approved_patches(self, input: impl Into<String>) -> Self

Appends an item to ApprovedPatches.

To override the contents of this collection use set_approved_patches.

A list of explicitly approved patches for the baseline.

For information about accepted formats for lists of approved patches and rejected patches, see About package name formats for approved and rejected patch lists in the Amazon Web Services Systems Manager User Guide.

pub fn set_approved_patches(self, input: Option<Vec<String>>) -> Self

A list of explicitly approved patches for the baseline.

For information about accepted formats for lists of approved patches and rejected patches, see About package name formats for approved and rejected patch lists in the Amazon Web Services Systems Manager User Guide.

pub fn get_approved_patches(&self) -> &Option<Vec<String>>

A list of explicitly approved patches for the baseline.

For information about accepted formats for lists of approved patches and rejected patches, see About package name formats for approved and rejected patch lists in the Amazon Web Services Systems Manager User Guide.

pub fn approved_patches_compliance_level( self, input: PatchComplianceLevel ) -> Self

Assigns a new compliance severity level to an existing patch baseline.

pub fn set_approved_patches_compliance_level( self, input: Option<PatchComplianceLevel> ) -> Self

Assigns a new compliance severity level to an existing patch baseline.

pub fn get_approved_patches_compliance_level( &self ) -> &Option<PatchComplianceLevel>

Assigns a new compliance severity level to an existing patch baseline.

pub fn approved_patches_enable_non_security(self, input: bool) -> Self

Indicates whether the list of approved patches includes non-security updates that should be applied to the managed nodes. The default value is false. Applies to Linux managed nodes only.

pub fn set_approved_patches_enable_non_security( self, input: Option<bool> ) -> Self

Indicates whether the list of approved patches includes non-security updates that should be applied to the managed nodes. The default value is false. Applies to Linux managed nodes only.

pub fn get_approved_patches_enable_non_security(&self) -> &Option<bool>

Indicates whether the list of approved patches includes non-security updates that should be applied to the managed nodes. The default value is false. Applies to Linux managed nodes only.

pub fn rejected_patches(self, input: impl Into<String>) -> Self

Appends an item to RejectedPatches.

To override the contents of this collection use set_rejected_patches.

A list of explicitly rejected patches for the baseline.

For information about accepted formats for lists of approved patches and rejected patches, see About package name formats for approved and rejected patch lists in the Amazon Web Services Systems Manager User Guide.

pub fn set_rejected_patches(self, input: Option<Vec<String>>) -> Self

A list of explicitly rejected patches for the baseline.

For information about accepted formats for lists of approved patches and rejected patches, see About package name formats for approved and rejected patch lists in the Amazon Web Services Systems Manager User Guide.

pub fn get_rejected_patches(&self) -> &Option<Vec<String>>

A list of explicitly rejected patches for the baseline.

For information about accepted formats for lists of approved patches and rejected patches, see About package name formats for approved and rejected patch lists in the Amazon Web Services Systems Manager User Guide.

pub fn rejected_patches_action(self, input: PatchAction) -> Self

The action for Patch Manager to take on patches included in the RejectedPackages list.

• ALLOW_AS_DEPENDENCY : A package in the Rejected patches list is installed only if it is a dependency of another package. It is considered compliant with the patch baseline, and its status is reported as InstalledOther. This is the default action if no option is specified.

• BLOCK : Packages in the RejectedPatches list, and packages that include them as dependencies, aren't installed under any circumstances. If a package was installed before it was added to the Rejected patches list, it is considered non-compliant with the patch baseline, and its status is reported as InstalledRejected.

pub fn set_rejected_patches_action(self, input: Option<PatchAction>) -> Self

The action for Patch Manager to take on patches included in the RejectedPackages list.

• ALLOW_AS_DEPENDENCY : A package in the Rejected patches list is installed only if it is a dependency of another package. It is considered compliant with the patch baseline, and its status is reported as InstalledOther. This is the default action if no option is specified.

• BLOCK : Packages in the RejectedPatches list, and packages that include them as dependencies, aren't installed under any circumstances. If a package was installed before it was added to the Rejected patches list, it is considered non-compliant with the patch baseline, and its status is reported as InstalledRejected.

pub fn get_rejected_patches_action(&self) -> &Option<PatchAction>

The action for Patch Manager to take on patches included in the RejectedPackages list.

• ALLOW_AS_DEPENDENCY : A package in the Rejected patches list is installed only if it is a dependency of another package. It is considered compliant with the patch baseline, and its status is reported as InstalledOther. This is the default action if no option is specified.

• BLOCK : Packages in the RejectedPatches list, and packages that include them as dependencies, aren't installed under any circumstances. If a package was installed before it was added to the Rejected patches list, it is considered non-compliant with the patch baseline, and its status is reported as InstalledRejected.

pub fn description(self, input: impl Into<String>) -> Self

A description of the patch baseline.

pub fn set_description(self, input: Option<String>) -> Self

A description of the patch baseline.

pub fn get_description(&self) -> &Option<String>

A description of the patch baseline.

pub fn sources(self, input: PatchSource) -> Self

Appends an item to Sources.

To override the contents of this collection use set_sources.

Information about the patches to use to update the managed nodes, including target operating systems and source repositories. Applies to Linux managed nodes only.

pub fn set_sources(self, input: Option<Vec<PatchSource>>) -> Self

Information about the patches to use to update the managed nodes, including target operating systems and source repositories. Applies to Linux managed nodes only.

pub fn get_sources(&self) -> &Option<Vec<PatchSource>>

Information about the patches to use to update the managed nodes, including target operating systems and source repositories. Applies to Linux managed nodes only.

pub fn replace(self, input: bool) -> Self

If True, then all fields that are required by the CreatePatchBaseline operation are also required for this API request. Optional fields that aren't specified are set to null.

pub fn set_replace(self, input: Option<bool>) -> Self

If True, then all fields that are required by the CreatePatchBaseline operation are also required for this API request. Optional fields that aren't specified are set to null.

pub fn get_replace(&self) -> &Option<bool>

If True, then all fields that are required by the CreatePatchBaseline operation are also required for this API request. Optional fields that aren't specified are set to null.

Trait Implementations

impl Clone for UpdatePatchBaselineFluentBuilder

fn clone(&self) -> UpdatePatchBaselineFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UpdatePatchBaselineFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.