Struct aws_sdk_ssm::client::fluent_builders::CreateMaintenanceWindow
source · [−]pub struct CreateMaintenanceWindow { /* private fields */ }
Expand description
Fluent builder constructing a request to CreateMaintenanceWindow
.
Creates a new maintenance window.
The value you specify for Duration
determines the specific end time for the maintenance window based on the time it begins. No maintenance window tasks are permitted to start after the resulting endtime minus the number of hours you specify for Cutoff
. For example, if the maintenance window starts at 3 PM, the duration is three hours, and the value you specify for Cutoff
is one hour, no maintenance window tasks can start after 5 PM.
Implementations
sourceimpl CreateMaintenanceWindow
impl CreateMaintenanceWindow
sourcepub async fn send(
self
) -> Result<CreateMaintenanceWindowOutput, SdkError<CreateMaintenanceWindowError>>
pub async fn send(
self
) -> Result<CreateMaintenanceWindowOutput, SdkError<CreateMaintenanceWindowError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
An optional description for the maintenance window. We recommend specifying a description to help you organize your maintenance windows.
sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
An optional description for the maintenance window. We recommend specifying a description to help you organize your maintenance windows.
sourcepub fn start_date(self, input: impl Into<String>) -> Self
pub fn start_date(self, input: impl Into<String>) -> Self
The date and time, in ISO-8601 Extended format, for when you want the maintenance window to become active. StartDate
allows you to delay activation of the maintenance window until the specified future date.
sourcepub fn set_start_date(self, input: Option<String>) -> Self
pub fn set_start_date(self, input: Option<String>) -> Self
The date and time, in ISO-8601 Extended format, for when you want the maintenance window to become active. StartDate
allows you to delay activation of the maintenance window until the specified future date.
sourcepub fn end_date(self, input: impl Into<String>) -> Self
pub fn end_date(self, input: impl Into<String>) -> Self
The date and time, in ISO-8601 Extended format, for when you want the maintenance window to become inactive. EndDate
allows you to set a date and time in the future when the maintenance window will no longer run.
sourcepub fn set_end_date(self, input: Option<String>) -> Self
pub fn set_end_date(self, input: Option<String>) -> Self
The date and time, in ISO-8601 Extended format, for when you want the maintenance window to become inactive. EndDate
allows you to set a date and time in the future when the maintenance window will no longer run.
sourcepub fn schedule(self, input: impl Into<String>) -> Self
pub fn schedule(self, input: impl Into<String>) -> Self
The schedule of the maintenance window in the form of a cron or rate expression.
sourcepub fn set_schedule(self, input: Option<String>) -> Self
pub fn set_schedule(self, input: Option<String>) -> Self
The schedule of the maintenance window in the form of a cron or rate expression.
sourcepub fn schedule_timezone(self, input: impl Into<String>) -> Self
pub fn schedule_timezone(self, input: impl Into<String>) -> Self
The time zone that the scheduled maintenance window executions are based on, in Internet Assigned Numbers Authority (IANA) format. For example: "America/Los_Angeles", "UTC", or "Asia/Seoul". For more information, see the Time Zone Database on the IANA website.
sourcepub fn set_schedule_timezone(self, input: Option<String>) -> Self
pub fn set_schedule_timezone(self, input: Option<String>) -> Self
The time zone that the scheduled maintenance window executions are based on, in Internet Assigned Numbers Authority (IANA) format. For example: "America/Los_Angeles", "UTC", or "Asia/Seoul". For more information, see the Time Zone Database on the IANA website.
sourcepub fn schedule_offset(self, input: i32) -> Self
pub fn schedule_offset(self, input: i32) -> Self
The number of days to wait after the date and time specified by a cron expression before running the maintenance window.
For example, the following cron expression schedules a maintenance window to run on the third Tuesday of every month at 11:30 PM.
cron(30 23 ? * TUE#3 *)
If the schedule offset is 2
, the maintenance window won't run until two days later.
sourcepub fn set_schedule_offset(self, input: Option<i32>) -> Self
pub fn set_schedule_offset(self, input: Option<i32>) -> Self
The number of days to wait after the date and time specified by a cron expression before running the maintenance window.
For example, the following cron expression schedules a maintenance window to run on the third Tuesday of every month at 11:30 PM.
cron(30 23 ? * TUE#3 *)
If the schedule offset is 2
, the maintenance window won't run until two days later.
sourcepub fn set_duration(self, input: Option<i32>) -> Self
pub fn set_duration(self, input: Option<i32>) -> Self
The duration of the maintenance window in hours.
sourcepub fn cutoff(self, input: i32) -> Self
pub fn cutoff(self, input: i32) -> Self
The number of hours before the end of the maintenance window that Amazon Web Services Systems Manager stops scheduling new tasks for execution.
sourcepub fn set_cutoff(self, input: Option<i32>) -> Self
pub fn set_cutoff(self, input: Option<i32>) -> Self
The number of hours before the end of the maintenance window that Amazon Web Services Systems Manager stops scheduling new tasks for execution.
sourcepub fn allow_unassociated_targets(self, input: bool) -> Self
pub fn allow_unassociated_targets(self, input: bool) -> Self
Enables a maintenance window task to run on managed nodes, even if you haven't registered those nodes as targets. If enabled, then you must specify the unregistered managed nodes (by node ID) when you register a task with the maintenance window.
If you don't enable this option, then you must specify previously-registered targets when you register a task with the maintenance window.
sourcepub fn set_allow_unassociated_targets(self, input: Option<bool>) -> Self
pub fn set_allow_unassociated_targets(self, input: Option<bool>) -> Self
Enables a maintenance window task to run on managed nodes, even if you haven't registered those nodes as targets. If enabled, then you must specify the unregistered managed nodes (by node ID) when you register a task with the maintenance window.
If you don't enable this option, then you must specify previously-registered targets when you register a task with the maintenance window.
sourcepub fn client_token(self, input: impl Into<String>) -> Self
pub fn client_token(self, input: impl Into<String>) -> Self
User-provided idempotency token.
sourcepub fn set_client_token(self, input: Option<String>) -> Self
pub fn set_client_token(self, input: Option<String>) -> Self
User-provided idempotency token.
Appends an item to Tags
.
To override the contents of this collection use set_tags
.
Optional metadata that you assign to a resource. Tags enable you to categorize a resource in different ways, such as by purpose, owner, or environment. For example, you might want to tag a maintenance window to identify the type of tasks it will run, the types of targets, and the environment it will run in. In this case, you could specify the following key-value pairs:
-
Key=TaskType,Value=AgentUpdate
-
Key=OS,Value=Windows
-
Key=Environment,Value=Production
To add tags to an existing maintenance window, use the AddTagsToResource
operation.
Optional metadata that you assign to a resource. Tags enable you to categorize a resource in different ways, such as by purpose, owner, or environment. For example, you might want to tag a maintenance window to identify the type of tasks it will run, the types of targets, and the environment it will run in. In this case, you could specify the following key-value pairs:
-
Key=TaskType,Value=AgentUpdate
-
Key=OS,Value=Windows
-
Key=Environment,Value=Production
To add tags to an existing maintenance window, use the AddTagsToResource
operation.
Trait Implementations
sourceimpl Clone for CreateMaintenanceWindow
impl Clone for CreateMaintenanceWindow
sourcefn clone(&self) -> CreateMaintenanceWindow
fn clone(&self) -> CreateMaintenanceWindow
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for CreateMaintenanceWindow
impl Send for CreateMaintenanceWindow
impl Sync for CreateMaintenanceWindow
impl Unpin for CreateMaintenanceWindow
impl !UnwindSafe for CreateMaintenanceWindow
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more