Struct aws_sdk_sns::types::PublishBatchRequestEntry

#[non_exhaustive]
pub struct PublishBatchRequestEntry {
    pub id: String,
    pub message: String,
    pub subject: Option<String>,
    pub message_structure: Option<String>,
    pub message_attributes: Option<HashMap<String, MessageAttributeValue>>,
    pub message_deduplication_id: Option<String>,
    pub message_group_id: Option<String>,
}

Contains the details of a single Amazon SNS message along with an Id that identifies a message within the batch.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

id: String

An identifier for the message in this batch.

The Ids of a batch request must be unique within a request.

This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).

message: String

The body of the message.

subject: Option<String>

The subject of the batch message.

message_structure: Option<String>

Set MessageStructure to json if you want to send a different message for each protocol. For example, using one publish action, you can send a short message to your SMS subscribers and a longer message to your email subscribers. If you set MessageStructure to json, the value of the Message parameter must:

• be a syntactically valid JSON object; and

• contain at least a top-level JSON key of "default" with a value that is a string.

You can define other top-level keys that define the message you want to send to a specific transport protocol (e.g. http).

message_attributes: Option<HashMap<String, MessageAttributeValue>>

Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SNS message attributes in the Amazon SNS Developer Guide.

message_deduplication_id: Option<String>

This parameter applies only to FIFO (first-in-first-out) topics.

The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages with the same MessageDeduplicationId are accepted successfully but aren't delivered.

• Every message must have a unique MessageDeduplicationId.

  • You may provide a MessageDeduplicationId explicitly.

  • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your topic, Amazon SNS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).

  • If you don't provide a MessageDeduplicationId and the topic doesn't have ContentBasedDeduplication set, the action fails with an error.

  • If the topic has a ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.

• When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.

• If you send one message with ContentBasedDeduplication enabled, and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

The MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues).

If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SNS can't detect duplicate messages.

Amazon SNS continues to keep track of the message deduplication ID even after the message is received and deleted.

The length of MessageDeduplicationId is 128 characters.

MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

message_group_id: Option<String>

This parameter applies only to FIFO (first-in-first-out) topics.

The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single topic, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the topic, but the session data of each user is processed in a FIFO fashion.

You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.

The length of MessageGroupId is 128 characters.

MessageGroupId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

MessageGroupId is required for FIFO topics. You can't use it for standard topics.

Implementations

impl PublishBatchRequestEntry

pub fn id(&self) -> &str

An identifier for the message in this batch.

The Ids of a batch request must be unique within a request.

This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).

pub fn message(&self) -> &str

The body of the message.

pub fn subject(&self) -> Option<&str>

The subject of the batch message.

pub fn message_structure(&self) -> Option<&str>

Set MessageStructure to json if you want to send a different message for each protocol. For example, using one publish action, you can send a short message to your SMS subscribers and a longer message to your email subscribers. If you set MessageStructure to json, the value of the Message parameter must:

• be a syntactically valid JSON object; and

• contain at least a top-level JSON key of "default" with a value that is a string.

You can define other top-level keys that define the message you want to send to a specific transport protocol (e.g. http).

pub fn message_attributes( &self ) -> Option<&HashMap<String, MessageAttributeValue>>

Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SNS message attributes in the Amazon SNS Developer Guide.

pub fn message_deduplication_id(&self) -> Option<&str>

This parameter applies only to FIFO (first-in-first-out) topics.

The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages with the same MessageDeduplicationId are accepted successfully but aren't delivered.

• Every message must have a unique MessageDeduplicationId.

  • You may provide a MessageDeduplicationId explicitly.

  • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your topic, Amazon SNS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).

  • If you don't provide a MessageDeduplicationId and the topic doesn't have ContentBasedDeduplication set, the action fails with an error.

  • If the topic has a ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.

• When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.

• If you send one message with ContentBasedDeduplication enabled, and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

The MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues).

If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SNS can't detect duplicate messages.

Amazon SNS continues to keep track of the message deduplication ID even after the message is received and deleted.

The length of MessageDeduplicationId is 128 characters.

MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

pub fn message_group_id(&self) -> Option<&str>

This parameter applies only to FIFO (first-in-first-out) topics.

The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single topic, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the topic, but the session data of each user is processed in a FIFO fashion.

You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.

The length of MessageGroupId is 128 characters.

MessageGroupId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

MessageGroupId is required for FIFO topics. You can't use it for standard topics.

impl PublishBatchRequestEntry

pub fn builder() -> PublishBatchRequestEntryBuilder

Creates a new builder-style object to manufacture PublishBatchRequestEntry.

Trait Implementations

impl Clone for PublishBatchRequestEntry

fn clone(&self) -> PublishBatchRequestEntry

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for PublishBatchRequestEntry

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for PublishBatchRequestEntry

fn eq(&self, other: &PublishBatchRequestEntry) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for PublishBatchRequestEntry