Struct aws_sdk_shield::client::Client

pub struct Client<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

An ergonomic service client for AWSShield_20160616.

This client allows ergonomic access to a AWSShield_20160616-shaped service. Each method corresponds to an endpoint defined in the service’s Smithy model, and the request and response shapes are auto-generated from that same model.

Using a Client

Once you have a client set up, you can access the service’s endpoints by calling the appropriate method on Client. Each such method returns a request builder for that endpoint, with methods for setting the various fields of the request. Once your request is complete, use the send method to send the request. send returns a future, which you then have to .await to get the service’s response.

Implementations

impl<C, M, R> Client<C, M, R>

pub fn with_config(client: Client<C, M, R>, conf: Config) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl<C, M, R> Client<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub fn associate_drt_log_bucket(&self) -> AssociateDRTLogBucket<C, M, R>

Constructs a fluent builder for the AssociateDRTLogBucket operation.

See AssociateDRTLogBucket for more information about the operation and its arguments.

pub fn associate_drt_role(&self) -> AssociateDRTRole<C, M, R>

Constructs a fluent builder for the AssociateDRTRole operation.

See AssociateDRTRole for more information about the operation and its arguments.

pub fn associate_health_check(&self) -> AssociateHealthCheck<C, M, R>

Constructs a fluent builder for the AssociateHealthCheck operation.

See AssociateHealthCheck for more information about the operation and its arguments.

pub fn associate_proactive_engagement_details(
    &self
) -> AssociateProactiveEngagementDetails<C, M, R>

Constructs a fluent builder for the AssociateProactiveEngagementDetails operation.

See AssociateProactiveEngagementDetails for more information about the operation and its arguments.

pub fn create_protection(&self) -> CreateProtection<C, M, R>

Constructs a fluent builder for the CreateProtection operation.

See CreateProtection for more information about the operation and its arguments.

pub fn create_protection_group(&self) -> CreateProtectionGroup<C, M, R>

Constructs a fluent builder for the CreateProtectionGroup operation.

See CreateProtectionGroup for more information about the operation and its arguments.

pub fn create_subscription(&self) -> CreateSubscription<C, M, R>

Constructs a fluent builder for the CreateSubscription operation.

See CreateSubscription for more information about the operation and its arguments.

pub fn delete_protection(&self) -> DeleteProtection<C, M, R>

Constructs a fluent builder for the DeleteProtection operation.

See DeleteProtection for more information about the operation and its arguments.

pub fn delete_protection_group(&self) -> DeleteProtectionGroup<C, M, R>

Constructs a fluent builder for the DeleteProtectionGroup operation.

See DeleteProtectionGroup for more information about the operation and its arguments.

pub fn delete_subscription(&self) -> DeleteSubscription<C, M, R>

Constructs a fluent builder for the DeleteSubscription operation.

See DeleteSubscription for more information about the operation and its arguments.

pub fn describe_attack(&self) -> DescribeAttack<C, M, R>

Constructs a fluent builder for the DescribeAttack operation.

See DescribeAttack for more information about the operation and its arguments.

pub fn describe_attack_statistics(&self) -> DescribeAttackStatistics<C, M, R>

Constructs a fluent builder for the DescribeAttackStatistics operation.

See DescribeAttackStatistics for more information about the operation and its arguments.

pub fn describe_drt_access(&self) -> DescribeDRTAccess<C, M, R>

Constructs a fluent builder for the DescribeDRTAccess operation.

See DescribeDRTAccess for more information about the operation and its arguments.

pub fn describe_emergency_contact_settings(
    &self
) -> DescribeEmergencyContactSettings<C, M, R>

Constructs a fluent builder for the DescribeEmergencyContactSettings operation.

See DescribeEmergencyContactSettings for more information about the operation and its arguments.

pub fn describe_protection(&self) -> DescribeProtection<C, M, R>

Constructs a fluent builder for the DescribeProtection operation.

See DescribeProtection for more information about the operation and its arguments.

pub fn describe_protection_group(&self) -> DescribeProtectionGroup<C, M, R>

Constructs a fluent builder for the DescribeProtectionGroup operation.

See DescribeProtectionGroup for more information about the operation and its arguments.

pub fn describe_subscription(&self) -> DescribeSubscription<C, M, R>

Constructs a fluent builder for the DescribeSubscription operation.

See DescribeSubscription for more information about the operation and its arguments.

pub fn disable_proactive_engagement(
    &self
) -> DisableProactiveEngagement<C, M, R>

Constructs a fluent builder for the DisableProactiveEngagement operation.

See DisableProactiveEngagement for more information about the operation and its arguments.

pub fn disassociate_drt_log_bucket(&self) -> DisassociateDRTLogBucket<C, M, R>

Constructs a fluent builder for the DisassociateDRTLogBucket operation.

See DisassociateDRTLogBucket for more information about the operation and its arguments.

pub fn disassociate_drt_role(&self) -> DisassociateDRTRole<C, M, R>

Constructs a fluent builder for the DisassociateDRTRole operation.

See DisassociateDRTRole for more information about the operation and its arguments.

pub fn disassociate_health_check(&self) -> DisassociateHealthCheck<C, M, R>

Constructs a fluent builder for the DisassociateHealthCheck operation.

See DisassociateHealthCheck for more information about the operation and its arguments.

pub fn enable_proactive_engagement(&self) -> EnableProactiveEngagement<C, M, R>

Constructs a fluent builder for the EnableProactiveEngagement operation.

See EnableProactiveEngagement for more information about the operation and its arguments.

pub fn get_subscription_state(&self) -> GetSubscriptionState<C, M, R>

Constructs a fluent builder for the GetSubscriptionState operation.

See GetSubscriptionState for more information about the operation and its arguments.

pub fn list_attacks(&self) -> ListAttacks<C, M, R>

Constructs a fluent builder for the ListAttacks operation.

See ListAttacks for more information about the operation and its arguments.

pub fn list_protection_groups(&self) -> ListProtectionGroups<C, M, R>

Constructs a fluent builder for the ListProtectionGroups operation.

See ListProtectionGroups for more information about the operation and its arguments.

pub fn list_protections(&self) -> ListProtections<C, M, R>

Constructs a fluent builder for the ListProtections operation.

See ListProtections for more information about the operation and its arguments.

pub fn list_resources_in_protection_group(
    &self
) -> ListResourcesInProtectionGroup<C, M, R>

Constructs a fluent builder for the ListResourcesInProtectionGroup operation.

See ListResourcesInProtectionGroup for more information about the operation and its arguments.

pub fn list_tags_for_resource(&self) -> ListTagsForResource<C, M, R>

Constructs a fluent builder for the ListTagsForResource operation.

See ListTagsForResource for more information about the operation and its arguments.

pub fn tag_resource(&self) -> TagResource<C, M, R>

Constructs a fluent builder for the TagResource operation.

See TagResource for more information about the operation and its arguments.

pub fn untag_resource(&self) -> UntagResource<C, M, R>

Constructs a fluent builder for the UntagResource operation.

See UntagResource for more information about the operation and its arguments.

pub fn update_emergency_contact_settings(
    &self
) -> UpdateEmergencyContactSettings<C, M, R>

Constructs a fluent builder for the UpdateEmergencyContactSettings operation.

See UpdateEmergencyContactSettings for more information about the operation and its arguments.

pub fn update_protection_group(&self) -> UpdateProtectionGroup<C, M, R>

Constructs a fluent builder for the UpdateProtectionGroup operation.

See UpdateProtectionGroup for more information about the operation and its arguments.

pub fn update_subscription(&self) -> UpdateSubscription<C, M, R>

Constructs a fluent builder for the UpdateSubscription operation.

See UpdateSubscription for more information about the operation and its arguments.

impl<C> Client<C, AwsMiddleware, Standard>

pub fn from_conf_conn(conf: Config, conn: C) -> Self

Creates a client with the given service config and connector override.

impl Client<DynConnector, AwsMiddleware, Standard>

pub fn new(config: &Config) -> Self

Creates a new client from a shared config.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Trait Implementations

impl<C, M, R> Clone for Client<C, M, R>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for Client<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C, M, R> From<Client<C, M, R>> for Client<C, M, R>

fn from(client: Client<C, M, R>) -> Self

Performs the conversion.