pub struct RedriveExecutionFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to RedriveExecution
.
Restarts unsuccessful executions of Standard workflows that didn't complete successfully in the last 14 days. These include failed, aborted, or timed out executions. When you redrive an execution, it continues the failed execution from the unsuccessful step and uses the same input. Step Functions preserves the results and execution history of the successful steps, and doesn't rerun these steps when you redrive an execution. Redriven executions use the same state machine definition and execution ARN as the original execution attempt.
For workflows that include an Inline Map or Parallel state, RedriveExecution
API action reschedules and redrives only the iterations and branches that failed or aborted.
To redrive a workflow that includes a Distributed Map state whose Map Run failed, you must redrive the parent workflow. The parent workflow redrives all the unsuccessful states, including a failed Map Run. If a Map Run was not started in the original execution attempt, the redriven parent workflow starts the Map Run.
This API action is not supported by EXPRESS
state machines.
However, you can restart the unsuccessful executions of Express child workflows in a Distributed Map by redriving its Map Run. When you redrive a Map Run, the Express child workflows are rerun using the StartExecution
API action. For more information, see Redriving Map Runs.
You can redrive executions if your original execution meets the following conditions:
-
The execution status isn't
SUCCEEDED
. -
Your workflow execution has not exceeded the redrivable period of 14 days. Redrivable period refers to the time during which you can redrive a given execution. This period starts from the day a state machine completes its execution.
-
The workflow execution has not exceeded the maximum open time of one year. For more information about state machine quotas, see Quotas related to state machine executions.
-
The execution event history count is less than 24,999. Redriven executions append their event history to the existing event history. Make sure your workflow execution contains less than 24,999 events to accommodate the
ExecutionRedriven
history event and at least one other history event.
Implementations§
Source§impl RedriveExecutionFluentBuilder
impl RedriveExecutionFluentBuilder
Sourcepub fn as_input(&self) -> &RedriveExecutionInputBuilder
pub fn as_input(&self) -> &RedriveExecutionInputBuilder
Access the RedriveExecution as a reference.
Sourcepub async fn send(
self,
) -> Result<RedriveExecutionOutput, SdkError<RedriveExecutionError, HttpResponse>>
pub async fn send( self, ) -> Result<RedriveExecutionOutput, SdkError<RedriveExecutionError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<RedriveExecutionOutput, RedriveExecutionError, Self>
pub fn customize( self, ) -> CustomizableOperation<RedriveExecutionOutput, RedriveExecutionError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn execution_arn(self, input: impl Into<String>) -> Self
pub fn execution_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the execution to be redriven.
Sourcepub fn set_execution_arn(self, input: Option<String>) -> Self
pub fn set_execution_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the execution to be redriven.
Sourcepub fn get_execution_arn(&self) -> &Option<String>
pub fn get_execution_arn(&self) -> &Option<String>
The Amazon Resource Name (ARN) of the execution to be redriven.
Sourcepub fn client_token(self, input: impl Into<String>) -> Self
pub fn client_token(self, input: impl Into<String>) -> Self
A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If you don’t specify a client token, the Amazon Web Services SDK automatically generates a client token and uses it for the request to ensure idempotency. The API will return idempotent responses for the last 10 client tokens used to successfully redrive the execution. These client tokens are valid for up to 15 minutes after they are first used.
Sourcepub fn set_client_token(self, input: Option<String>) -> Self
pub fn set_client_token(self, input: Option<String>) -> Self
A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If you don’t specify a client token, the Amazon Web Services SDK automatically generates a client token and uses it for the request to ensure idempotency. The API will return idempotent responses for the last 10 client tokens used to successfully redrive the execution. These client tokens are valid for up to 15 minutes after they are first used.
Sourcepub fn get_client_token(&self) -> &Option<String>
pub fn get_client_token(&self) -> &Option<String>
A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If you don’t specify a client token, the Amazon Web Services SDK automatically generates a client token and uses it for the request to ensure idempotency. The API will return idempotent responses for the last 10 client tokens used to successfully redrive the execution. These client tokens are valid for up to 15 minutes after they are first used.
Trait Implementations§
Source§impl Clone for RedriveExecutionFluentBuilder
impl Clone for RedriveExecutionFluentBuilder
Source§fn clone(&self) -> RedriveExecutionFluentBuilder
fn clone(&self) -> RedriveExecutionFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for RedriveExecutionFluentBuilder
impl !RefUnwindSafe for RedriveExecutionFluentBuilder
impl Send for RedriveExecutionFluentBuilder
impl Sync for RedriveExecutionFluentBuilder
impl Unpin for RedriveExecutionFluentBuilder
impl !UnwindSafe for RedriveExecutionFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);