#[non_exhaustive]pub struct ReputationOptions {
pub sending_enabled: bool,
pub reputation_metrics_enabled: bool,
pub last_fresh_start: Option<DateTime>,
}
Expand description
Contains information about the reputation settings for a configuration set.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.sending_enabled: bool
Describes whether email sending is enabled or disabled for the configuration set. If the value is true
, then Amazon SES sends emails that use the configuration set. If the value is false
, Amazon SES does not send emails that use the configuration set. The default value is true
. You can change this setting using UpdateConfigurationSetSendingEnabled
.
reputation_metrics_enabled: bool
Describes whether or not Amazon SES publishes reputation metrics for the configuration set, such as bounce and complaint rates, to Amazon CloudWatch.
If the value is true
, reputation metrics are published. If the value is false
, reputation metrics are not published. The default value is false
.
last_fresh_start: Option<DateTime>
The date and time at which the reputation metrics for the configuration set were last reset. Resetting these metrics is known as a fresh start.
When you disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled
and later re-enable it, the reputation metrics for the configuration set (but not for the entire Amazon SES account) are reset.
If email sending for the configuration set has never been disabled and later re-enabled, the value of this attribute is null
.
Implementations§
Source§impl ReputationOptions
impl ReputationOptions
Sourcepub fn sending_enabled(&self) -> bool
pub fn sending_enabled(&self) -> bool
Describes whether email sending is enabled or disabled for the configuration set. If the value is true
, then Amazon SES sends emails that use the configuration set. If the value is false
, Amazon SES does not send emails that use the configuration set. The default value is true
. You can change this setting using UpdateConfigurationSetSendingEnabled
.
Sourcepub fn reputation_metrics_enabled(&self) -> bool
pub fn reputation_metrics_enabled(&self) -> bool
Describes whether or not Amazon SES publishes reputation metrics for the configuration set, such as bounce and complaint rates, to Amazon CloudWatch.
If the value is true
, reputation metrics are published. If the value is false
, reputation metrics are not published. The default value is false
.
Sourcepub fn last_fresh_start(&self) -> Option<&DateTime>
pub fn last_fresh_start(&self) -> Option<&DateTime>
The date and time at which the reputation metrics for the configuration set were last reset. Resetting these metrics is known as a fresh start.
When you disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled
and later re-enable it, the reputation metrics for the configuration set (but not for the entire Amazon SES account) are reset.
If email sending for the configuration set has never been disabled and later re-enabled, the value of this attribute is null
.
Source§impl ReputationOptions
impl ReputationOptions
Sourcepub fn builder() -> ReputationOptionsBuilder
pub fn builder() -> ReputationOptionsBuilder
Creates a new builder-style object to manufacture ReputationOptions
.
Trait Implementations§
Source§impl Clone for ReputationOptions
impl Clone for ReputationOptions
Source§fn clone(&self) -> ReputationOptions
fn clone(&self) -> ReputationOptions
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for ReputationOptions
impl Debug for ReputationOptions
Source§impl PartialEq for ReputationOptions
impl PartialEq for ReputationOptions
impl StructuralPartialEq for ReputationOptions
Auto Trait Implementations§
impl Freeze for ReputationOptions
impl RefUnwindSafe for ReputationOptions
impl Send for ReputationOptions
impl Sync for ReputationOptions
impl Unpin for ReputationOptions
impl UnwindSafe for ReputationOptions
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);