Struct SendBulkTemplatedEmailInput 

#[non_exhaustive]
pub struct SendBulkTemplatedEmailInput {
    pub source: Option<String>,
    pub source_arn: Option<String>,
    pub reply_to_addresses: Option<Vec<String>>,
    pub return_path: Option<String>,
    pub return_path_arn: Option<String>,
    pub configuration_set_name: Option<String>,
    pub default_tags: Option<Vec<MessageTag>>,
    pub template: Option<String>,
    pub template_arn: Option<String>,
    pub default_template_data: Option<String>,
    pub destinations: Option<Vec<BulkEmailDestination>>,
}

Represents a request to send a templated email to multiple destinations using Amazon SES. For more information, see the Amazon SES Developer Guide.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

source: Option<String>

The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.

If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492.

source_arn: Option<String>

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com.

For more information about sending authorization, see the Amazon SES Developer Guide.

reply_to_addresses: Option<Vec<String>>

The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply.

return_path: Option<String>

The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient's ISP; this message is forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.

return_path_arn: Option<String>

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com.

For more information about sending authorization, see the Amazon SES Developer Guide.

configuration_set_name: Option<String>

The name of the configuration set to use when you send an email using SendBulkTemplatedEmail.

default_tags: Option<Vec<MessageTag>>

A list of tags, in the form of name/value pairs, to apply to an email that you send to a destination using SendBulkTemplatedEmail.

template: Option<String>

The template to use when sending this email.

template_arn: Option<String>

The ARN of the template to use when sending this email.

default_template_data: Option<String>

A list of replacement values to apply to the template when replacement data is not specified in a Destination object. These values act as a default or fallback option when no other data is available.

The template data is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

destinations: Option<Vec<BulkEmailDestination>>

One or more Destination objects. All of the recipients in a Destination receive the same version of the email. You can specify up to 50 Destination objects within a Destinations array.

Implementations

impl SendBulkTemplatedEmailInput

pub fn source(&self) -> Option<&str>

The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.

If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492.

pub fn source_arn(&self) -> Option<&str>

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com.

For more information about sending authorization, see the Amazon SES Developer Guide.

pub fn reply_to_addresses(&self) -> &[String]

The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .reply_to_addresses.is_none().

pub fn return_path(&self) -> Option<&str>

The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient's ISP; this message is forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.

pub fn return_path_arn(&self) -> Option<&str>

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com.

For more information about sending authorization, see the Amazon SES Developer Guide.

pub fn configuration_set_name(&self) -> Option<&str>

The name of the configuration set to use when you send an email using SendBulkTemplatedEmail.

pub fn default_tags(&self) -> &[MessageTag]

A list of tags, in the form of name/value pairs, to apply to an email that you send to a destination using SendBulkTemplatedEmail.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .default_tags.is_none().

pub fn template(&self) -> Option<&str>

The template to use when sending this email.

pub fn template_arn(&self) -> Option<&str>

The ARN of the template to use when sending this email.

pub fn default_template_data(&self) -> Option<&str>

A list of replacement values to apply to the template when replacement data is not specified in a Destination object. These values act as a default or fallback option when no other data is available.

The template data is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

pub fn destinations(&self) -> &[BulkEmailDestination]

One or more Destination objects. All of the recipients in a Destination receive the same version of the email. You can specify up to 50 Destination objects within a Destinations array.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .destinations.is_none().

impl SendBulkTemplatedEmailInput

pub fn builder() -> SendBulkTemplatedEmailInputBuilder

Creates a new builder-style object to manufacture SendBulkTemplatedEmailInput.

Trait Implementations

impl Clone for SendBulkTemplatedEmailInput

fn clone(&self) -> SendBulkTemplatedEmailInput

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SendBulkTemplatedEmailInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for SendBulkTemplatedEmailInput

fn eq(&self, other: &SendBulkTemplatedEmailInput) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for SendBulkTemplatedEmailInput