Struct aws_sdk_ses::client::fluent_builders::SendTemplatedEmail
source · [−]pub struct SendTemplatedEmail<C = DynConnector, M = DefaultMiddleware, R = Standard> { /* private fields */ }
Expand description
Fluent builder constructing a request to SendTemplatedEmail
.
Composes an email message using an email template and immediately queues it for sending.
In order to send email using the SendTemplatedEmail
operation, your call to the API must meet the following requirements:
-
The call must refer to an existing email template. You can create email templates using the
CreateTemplate
operation. -
The message must be sent from a verified email address or domain.
-
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
-
The maximum message size is 10 MB.
-
Calls to the
SendTemplatedEmail
operation may only include oneDestination
parameter. A destination is a set of recipients who will receive the same version of the email. TheDestination
parameter can include up to 50 recipients, across the To:, CC: and BCC: fields. -
The
Destination
parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.
If your call to the SendTemplatedEmail
operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can't render the email because the template contains errors, it doesn't send the email. Additionally, because it already accepted the message, Amazon SES doesn't return a message stating that it was unable to send the email.
For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide.
Implementations
impl<C, M, R> SendTemplatedEmail<C, M, R> where
C: SmithyConnector,
M: SmithyMiddleware<C>,
R: NewRequestPolicy,
impl<C, M, R> SendTemplatedEmail<C, M, R> where
C: SmithyConnector,
M: SmithyMiddleware<C>,
R: NewRequestPolicy,
pub async fn send(
self
) -> Result<SendTemplatedEmailOutput, SdkError<SendTemplatedEmailError>> where
R::Policy: SmithyRetryPolicy<SendTemplatedEmailInputOperationOutputAlias, SendTemplatedEmailOutput, SendTemplatedEmailError, SendTemplatedEmailInputOperationRetryAlias>,
pub async fn send(
self
) -> Result<SendTemplatedEmailOutput, SdkError<SendTemplatedEmailError>> where
R::Policy: SmithyRetryPolicy<SendTemplatedEmailInputOperationOutputAlias, SendTemplatedEmailOutput, SendTemplatedEmailError, SendTemplatedEmailInputOperationRetryAlias>,
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.
If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn
parameter. For more information about sending authorization, see the Amazon SES Developer Guide.
Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described inRFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=
.
The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide.
If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn
parameter. For more information about sending authorization, see the Amazon SES Developer Guide.
Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described inRFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=
.
The destination for this email, composed of To:, CC:, and BCC: fields. A Destination can include up to 50 recipients across these three fields.
The destination for this email, composed of To:, CC:, and BCC: fields. A Destination can include up to 50 recipients across these three fields.
Appends an item to ReplyToAddresses
.
To override the contents of this collection use set_reply_to_addresses
.
The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.
The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.
The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath
parameter. The ReturnPath
parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.
The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath
parameter. The ReturnPath
parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source
parameter.
For example, if the owner of example.com
(which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com
) attaches a policy to it that authorizes you to send from user@example.com
, then you would specify the SourceArn
to be arn:aws:ses:us-east-1:123456789012:identity/example.com
, and the Source
to be user@example.com
.
For more information about sending authorization, see the Amazon SES Developer Guide.
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source
parameter.
For example, if the owner of example.com
(which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com
) attaches a policy to it that authorizes you to send from user@example.com
, then you would specify the SourceArn
to be arn:aws:ses:us-east-1:123456789012:identity/example.com
, and the Source
to be user@example.com
.
For more information about sending authorization, see the Amazon SES Developer Guide.
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath
parameter.
For example, if the owner of example.com
(which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com
) attaches a policy to it that authorizes you to use feedback@example.com
, then you would specify the ReturnPathArn
to be arn:aws:ses:us-east-1:123456789012:identity/example.com
, and the ReturnPath
to be feedback@example.com
.
For more information about sending authorization, see the Amazon SES Developer Guide.
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath
parameter.
For example, if the owner of example.com
(which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com
) attaches a policy to it that authorizes you to use feedback@example.com
, then you would specify the ReturnPathArn
to be arn:aws:ses:us-east-1:123456789012:identity/example.com
, and the ReturnPath
to be feedback@example.com
.
For more information about sending authorization, see the Amazon SES Developer Guide.
Appends an item to Tags
.
To override the contents of this collection use set_tags
.
A list of tags, in the form of name/value pairs, to apply to an email that you send using SendTemplatedEmail
. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.
A list of tags, in the form of name/value pairs, to apply to an email that you send using SendTemplatedEmail
. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.
The name of the configuration set to use when you send an email using SendTemplatedEmail
.
The name of the configuration set to use when you send an email using SendTemplatedEmail
.
The template to use when sending this email.
The template to use when sending this email.
The ARN of the template to use when sending this email.
The ARN of the template to use when sending this email.
A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.
A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.
Trait Implementations
Auto Trait Implementations
impl<C = DynConnector, M = DefaultMiddleware, R = Standard> !RefUnwindSafe for SendTemplatedEmail<C, M, R>
impl<C, M, R> Send for SendTemplatedEmail<C, M, R> where
C: Send + Sync,
M: Send + Sync,
R: Send + Sync,
impl<C, M, R> Sync for SendTemplatedEmail<C, M, R> where
C: Send + Sync,
M: Send + Sync,
R: Send + Sync,
impl<C, M, R> Unpin for SendTemplatedEmail<C, M, R>
impl<C = DynConnector, M = DefaultMiddleware, R = Standard> !UnwindSafe for SendTemplatedEmail<C, M, R>
Blanket Implementations
Mutably borrows from an owned value. Read more
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more