aws_sdk_securityhub::types

Struct PatchSummary

#[non_exhaustive]pub struct PatchSummary {
    pub id: Option<String>,
    pub installed_count: Option<i32>,
    pub missing_count: Option<i32>,
    pub failed_count: Option<i32>,
    pub installed_other_count: Option<i32>,
    pub installed_rejected_count: Option<i32>,
    pub installed_pending_reboot: Option<i32>,
    pub operation_start_time: Option<String>,
    pub operation_end_time: Option<String>,
    pub reboot_option: Option<String>,
    pub operation: Option<String>,
}

Expand description

Provides an overview of the patch compliance status for an instance against a selected compliance standard.

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

§id: Option<String>

The identifier of the compliance standard that was used to determine the patch compliance status.

Length Constraints: Minimum length of 1. Maximum length of 256.

§installed_count: Option<i32>

The number of patches from the compliance standard that were installed successfully.

The value can be an integer from 0 to 100000.

§missing_count: Option<i32>

The number of patches that are part of the compliance standard but are not installed. The count includes patches that failed to install.

The value can be an integer from 0 to 100000.

§failed_count: Option<i32>

The number of patches from the compliance standard that failed to install.

The value can be an integer from 0 to 100000.

§installed_other_count: Option<i32>

The number of installed patches that are not part of the compliance standard.

The value can be an integer from 0 to 100000.

§installed_rejected_count: Option<i32>

The number of patches that are installed but are also on a list of patches that the customer rejected.

The value can be an integer from 0 to 100000.

§installed_pending_reboot: Option<i32>

The number of patches that were applied, but that require the instance to be rebooted in order to be marked as installed.

The value can be an integer from 0 to 100000.

§operation_start_time: Option<String>

Indicates when the operation started.

For more information about the validation and formatting of timestamp fields in Security Hub, see Timestamps.

§operation_end_time: Option<String>

Indicates when the operation completed.

For more information about the validation and formatting of timestamp fields in Security Hub, see Timestamps.

§reboot_option: Option<String>

The reboot option specified for the instance.

Length Constraints: Minimum length of 1. Maximum length of 256.

§operation: Option<String>

The type of patch operation performed. For Patch Manager, the values are SCAN and INSTALL.

Length Constraints: Minimum length of 1. Maximum length of 256.

Implementations§

impl PatchSummary

pub fn id(&self) -> Option<&str>

The identifier of the compliance standard that was used to determine the patch compliance status.

Length Constraints: Minimum length of 1. Maximum length of 256.

pub fn installed_count(&self) -> Option<i32>

The number of patches from the compliance standard that were installed successfully.

The value can be an integer from 0 to 100000.

pub fn missing_count(&self) -> Option<i32>

The number of patches that are part of the compliance standard but are not installed. The count includes patches that failed to install.

The value can be an integer from 0 to 100000.

pub fn failed_count(&self) -> Option<i32>

The number of patches from the compliance standard that failed to install.

The value can be an integer from 0 to 100000.

pub fn installed_other_count(&self) -> Option<i32>

The number of installed patches that are not part of the compliance standard.

The value can be an integer from 0 to 100000.

pub fn installed_rejected_count(&self) -> Option<i32>

The number of patches that are installed but are also on a list of patches that the customer rejected.

The value can be an integer from 0 to 100000.

pub fn installed_pending_reboot(&self) -> Option<i32>

The number of patches that were applied, but that require the instance to be rebooted in order to be marked as installed.

The value can be an integer from 0 to 100000.

pub fn operation_start_time(&self) -> Option<&str>

Indicates when the operation started.

For more information about the validation and formatting of timestamp fields in Security Hub, see Timestamps.

pub fn operation_end_time(&self) -> Option<&str>

Indicates when the operation completed.

For more information about the validation and formatting of timestamp fields in Security Hub, see Timestamps.

pub fn reboot_option(&self) -> Option<&str>

The reboot option specified for the instance.

Length Constraints: Minimum length of 1. Maximum length of 256.

pub fn operation(&self) -> Option<&str>

The type of patch operation performed. For Patch Manager, the values are SCAN and INSTALL.

Length Constraints: Minimum length of 1. Maximum length of 256.

impl PatchSummary

pub fn builder() -> PatchSummaryBuilder

Creates a new builder-style object to manufacture PatchSummary.

Trait Implementations§

impl Clone for PatchSummary

fn clone(&self) -> PatchSummary

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for PatchSummary

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl PartialEq for PatchSummary

fn eq(&self, other: &PatchSummary) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for PatchSummary

Auto Trait Implementations§

impl Freeze for PatchSummary

impl RefUnwindSafe for PatchSummary

impl Send for PatchSummary

impl Sync for PatchSummary

impl Unpin for PatchSummary

impl UnwindSafe for PatchSummary

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

impl<T> Paint for T
where T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example

println!("{}", value.primary());

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example

println!("{}", value.fixed(color));

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example

println!("{}", value.rgb(r, g, b));

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example

println!("{}", value.black());

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example

println!("{}", value.red());

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example

println!("{}", value.green());

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example

println!("{}", value.yellow());

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example

println!("{}", value.blue());

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example

println!("{}", value.magenta());

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example

println!("{}", value.cyan());

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example

println!("{}", value.white());

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example

println!("{}", value.bright_black());

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example

println!("{}", value.bright_red());

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example

println!("{}", value.bright_green());

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example

println!("{}", value.bright_yellow());

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example

println!("{}", value.bright_blue());

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.bright_magenta());

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example

println!("{}", value.bright_cyan());

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example

println!("{}", value.bright_white());

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example

println!("{}", value.on_primary());

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example

println!("{}", value.on_fixed(color));

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example

println!("{}", value.on_black());

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example

println!("{}", value.on_red());

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example

println!("{}", value.on_green());

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example

println!("{}", value.on_yellow());

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example

println!("{}", value.on_blue());

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example

println!("{}", value.on_magenta());

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example

println!("{}", value.on_cyan());

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example

println!("{}", value.on_white());

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example

println!("{}", value.on_bright_black());

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example

println!("{}", value.on_bright_red());

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example

println!("{}", value.on_bright_green());

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example

println!("{}", value.on_bright_blue());

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example

println!("{}", value.on_bright_white());

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example

println!("{}", value.bold());

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example

println!("{}", value.dim());

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example

println!("{}", value.italic());

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example

println!("{}", value.underline());

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Blink].

§Example

println!("{}", value.blink());

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example

println!("{}", value.rapid_blink());

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example

println!("{}", value.invert());

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example

println!("{}", value.conceal());

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example

println!("{}", value.strike());

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example

println!("{}", value.mask());

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example

println!("{}", value.wrap());

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example

println!("{}", value.linger());

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example

println!("{}", value.clear());

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example

println!("{}", value.resetting());

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example

println!("{}", value.bright());

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example

println!("{}", value.on_bright());

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

impl<T> ErasedDestructor for T
where T: 'static,