Struct aws_sdk_securityhub::types::builders::PatchSummaryBuilder

source · 
#[non_exhaustive]
pub struct PatchSummaryBuilder { /* private fields */ }
Expand description

A builder for PatchSummary.

Implementations§

source§

impl PatchSummaryBuilder

source

pub fn id(self, input: impl Into<String>) -> Self

The identifier of the compliance standard that was used to determine the patch compliance status.

Length Constraints: Minimum length of 1. Maximum length of 256.

This field is required.
source

pub fn set_id(self, input: Option<String>) -> Self

The identifier of the compliance standard that was used to determine the patch compliance status.

Length Constraints: Minimum length of 1. Maximum length of 256.

source

pub fn get_id(&self) -> &Option<String>

The identifier of the compliance standard that was used to determine the patch compliance status.

Length Constraints: Minimum length of 1. Maximum length of 256.

source

pub fn installed_count(self, input: i32) -> Self

The number of patches from the compliance standard that were installed successfully.

The value can be an integer from 0 to 100000.

source

pub fn set_installed_count(self, input: Option<i32>) -> Self

The number of patches from the compliance standard that were installed successfully.

The value can be an integer from 0 to 100000.

source

pub fn get_installed_count(&self) -> &Option<i32>

The number of patches from the compliance standard that were installed successfully.

The value can be an integer from 0 to 100000.

source

pub fn missing_count(self, input: i32) -> Self

The number of patches that are part of the compliance standard but are not installed. The count includes patches that failed to install.

The value can be an integer from 0 to 100000.

source

pub fn set_missing_count(self, input: Option<i32>) -> Self

The number of patches that are part of the compliance standard but are not installed. The count includes patches that failed to install.

The value can be an integer from 0 to 100000.

source

pub fn get_missing_count(&self) -> &Option<i32>

The number of patches that are part of the compliance standard but are not installed. The count includes patches that failed to install.

The value can be an integer from 0 to 100000.

source

pub fn failed_count(self, input: i32) -> Self

The number of patches from the compliance standard that failed to install.

The value can be an integer from 0 to 100000.

source

pub fn set_failed_count(self, input: Option<i32>) -> Self

The number of patches from the compliance standard that failed to install.

The value can be an integer from 0 to 100000.

source

pub fn get_failed_count(&self) -> &Option<i32>

The number of patches from the compliance standard that failed to install.

The value can be an integer from 0 to 100000.

source

pub fn installed_other_count(self, input: i32) -> Self

The number of installed patches that are not part of the compliance standard.

The value can be an integer from 0 to 100000.

source

pub fn set_installed_other_count(self, input: Option<i32>) -> Self

The number of installed patches that are not part of the compliance standard.

The value can be an integer from 0 to 100000.

source

pub fn get_installed_other_count(&self) -> &Option<i32>

The number of installed patches that are not part of the compliance standard.

The value can be an integer from 0 to 100000.

source

pub fn installed_rejected_count(self, input: i32) -> Self

The number of patches that are installed but are also on a list of patches that the customer rejected.

The value can be an integer from 0 to 100000.

source

pub fn set_installed_rejected_count(self, input: Option<i32>) -> Self

The number of patches that are installed but are also on a list of patches that the customer rejected.

The value can be an integer from 0 to 100000.

source

pub fn get_installed_rejected_count(&self) -> &Option<i32>

The number of patches that are installed but are also on a list of patches that the customer rejected.

The value can be an integer from 0 to 100000.

source

pub fn installed_pending_reboot(self, input: i32) -> Self

The number of patches that were applied, but that require the instance to be rebooted in order to be marked as installed.

The value can be an integer from 0 to 100000.

source

pub fn set_installed_pending_reboot(self, input: Option<i32>) -> Self

The number of patches that were applied, but that require the instance to be rebooted in order to be marked as installed.

The value can be an integer from 0 to 100000.

source

pub fn get_installed_pending_reboot(&self) -> &Option<i32>

The number of patches that were applied, but that require the instance to be rebooted in order to be marked as installed.

The value can be an integer from 0 to 100000.

source

pub fn operation_start_time(self, input: impl Into<String>) -> Self

Indicates when the operation started.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

  • YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

  • YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

  • YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

source

pub fn set_operation_start_time(self, input: Option<String>) -> Self

Indicates when the operation started.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

  • YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

  • YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

  • YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

source

pub fn get_operation_start_time(&self) -> &Option<String>

Indicates when the operation started.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

  • YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

  • YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

  • YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

source

pub fn operation_end_time(self, input: impl Into<String>) -> Self

Indicates when the operation completed.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

  • YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

  • YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

  • YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

source

pub fn set_operation_end_time(self, input: Option<String>) -> Self

Indicates when the operation completed.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

  • YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

  • YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

  • YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

source

pub fn get_operation_end_time(&self) -> &Option<String>

Indicates when the operation completed.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

  • YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

  • YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

  • YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

  • YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

source

pub fn reboot_option(self, input: impl Into<String>) -> Self

The reboot option specified for the instance.

Length Constraints: Minimum length of 1. Maximum length of 256.

source

pub fn set_reboot_option(self, input: Option<String>) -> Self

The reboot option specified for the instance.

Length Constraints: Minimum length of 1. Maximum length of 256.

source

pub fn get_reboot_option(&self) -> &Option<String>

The reboot option specified for the instance.

Length Constraints: Minimum length of 1. Maximum length of 256.

source

pub fn operation(self, input: impl Into<String>) -> Self

The type of patch operation performed. For Patch Manager, the values are SCAN and INSTALL.

Length Constraints: Minimum length of 1. Maximum length of 256.

source

pub fn set_operation(self, input: Option<String>) -> Self

The type of patch operation performed. For Patch Manager, the values are SCAN and INSTALL.

Length Constraints: Minimum length of 1. Maximum length of 256.

source

pub fn get_operation(&self) -> &Option<String>

The type of patch operation performed. For Patch Manager, the values are SCAN and INSTALL.

Length Constraints: Minimum length of 1. Maximum length of 256.

source

pub fn build(self) -> PatchSummary

Consumes the builder and constructs a PatchSummary.

Trait Implementations§

source§

impl Clone for PatchSummaryBuilder

source§

fn clone(&self) -> PatchSummaryBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for PatchSummaryBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for PatchSummaryBuilder

source§

fn default() -> PatchSummaryBuilder

Returns the “default value” for a type. Read more
source§

impl PartialEq for PatchSummaryBuilder

source§

fn eq(&self, other: &PatchSummaryBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl StructuralPartialEq for PatchSummaryBuilder

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more