Struct aws_sdk_securityhub::operation::get_finding_history::GetFindingHistoryInput

#[non_exhaustive]
pub struct GetFindingHistoryInput {
    pub finding_identifier: Option<AwsSecurityFindingIdentifier>,
    pub start_time: Option<DateTime>,
    pub end_time: Option<DateTime>,
    pub next_token: Option<String>,
    pub max_results: Option<i32>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

finding_identifier: Option<AwsSecurityFindingIdentifier>

Identifies which finding to get the finding history for.

start_time: Option<DateTime>

A timestamp that indicates the start time of the requested finding history.

If you provide values for both StartTime and EndTime, Security Hub returns finding history for the specified time period. If you provide a value for StartTime but not for EndTime, Security Hub returns finding history from the StartTime to the time at which the API is called. If you provide a value for EndTime but not for StartTime, Security Hub returns finding history from the CreatedAt timestamp of the finding to the EndTime. If you provide neither StartTime nor EndTime, Security Hub returns finding history from the CreatedAt timestamp of the finding to the time at which the API is called. In all of these scenarios, the response is limited to 100 results, and the maximum time period is limited to 90 days.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

• YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

• YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

• YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

• YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

• YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

end_time: Option<DateTime>

An ISO 8601-formatted timestamp that indicates the end time of the requested finding history.

If you provide values for both StartTime and EndTime, Security Hub returns finding history for the specified time period. If you provide a value for StartTime but not for EndTime, Security Hub returns finding history from the StartTime to the time at which the API is called. If you provide a value for EndTime but not for StartTime, Security Hub returns finding history from the CreatedAt timestamp of the finding to the EndTime. If you provide neither StartTime nor EndTime, Security Hub returns finding history from the CreatedAt timestamp of the finding to the time at which the API is called. In all of these scenarios, the response is limited to 100 results, and the maximum time period is limited to 90 days.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

• YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

• YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

• YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

• YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

• YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

next_token: Option<String>

A token for pagination purposes. Provide NULL as the initial value. In subsequent requests, provide the token included in the response to get up to an additional 100 results of finding history. If you don’t provide NextToken, Security Hub returns up to 100 results of finding history for each request.

max_results: Option<i32>

The maximum number of results to be returned. If you don’t provide it, Security Hub returns up to 100 results of finding history.

Implementations

impl GetFindingHistoryInput

pub fn finding_identifier(&self) -> Option<&AwsSecurityFindingIdentifier>

Identifies which finding to get the finding history for.

pub fn start_time(&self) -> Option<&DateTime>

A timestamp that indicates the start time of the requested finding history.

If you provide values for both StartTime and EndTime, Security Hub returns finding history for the specified time period. If you provide a value for StartTime but not for EndTime, Security Hub returns finding history from the StartTime to the time at which the API is called. If you provide a value for EndTime but not for StartTime, Security Hub returns finding history from the CreatedAt timestamp of the finding to the EndTime. If you provide neither StartTime nor EndTime, Security Hub returns finding history from the CreatedAt timestamp of the finding to the time at which the API is called. In all of these scenarios, the response is limited to 100 results, and the maximum time period is limited to 90 days.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

• YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

• YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

• YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

• YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

• YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

pub fn end_time(&self) -> Option<&DateTime>

An ISO 8601-formatted timestamp that indicates the end time of the requested finding history.

If you provide values for both StartTime and EndTime, Security Hub returns finding history for the specified time period. If you provide a value for StartTime but not for EndTime, Security Hub returns finding history from the StartTime to the time at which the API is called. If you provide a value for EndTime but not for StartTime, Security Hub returns finding history from the CreatedAt timestamp of the finding to the EndTime. If you provide neither StartTime nor EndTime, Security Hub returns finding history from the CreatedAt timestamp of the finding to the time at which the API is called. In all of these scenarios, the response is limited to 100 results, and the maximum time period is limited to 90 days.

This field accepts only the specified formats. Timestamps can end with Z or ("+" / "-") time-hour [":" time-minute]. The time-secfrac after seconds is limited to a maximum of 9 digits. The offset is bounded by +/-18:00. Here are valid timestamp formats with examples:

• YYYY-MM-DDTHH:MM:SSZ (for example, 2019-01-31T23:00:00Z)

• YYYY-MM-DDTHH:MM:SS.mmmmmmmmmZ (for example, 2019-01-31T23:00:00.123456789Z)

• YYYY-MM-DDTHH:MM:SS+HH:MM (for example, 2024-01-04T15:25:10+17:59)

• YYYY-MM-DDTHH:MM:SS-HHMM (for example, 2024-01-04T15:25:10-1759)

• YYYY-MM-DDTHH:MM:SS.mmmmmmmmm+HH:MM (for example, 2024-01-04T15:25:10.123456789+17:59)

pub fn next_token(&self) -> Option<&str>

A token for pagination purposes. Provide NULL as the initial value. In subsequent requests, provide the token included in the response to get up to an additional 100 results of finding history. If you don’t provide NextToken, Security Hub returns up to 100 results of finding history for each request.

pub fn max_results(&self) -> Option<i32>

The maximum number of results to be returned. If you don’t provide it, Security Hub returns up to 100 results of finding history.

impl GetFindingHistoryInput

pub fn builder() -> GetFindingHistoryInputBuilder

Creates a new builder-style object to manufacture GetFindingHistoryInput.

Trait Implementations

impl Clone for GetFindingHistoryInput

fn clone(&self) -> GetFindingHistoryInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for GetFindingHistoryInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for GetFindingHistoryInput

fn eq(&self, other: &GetFindingHistoryInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for GetFindingHistoryInput