Struct aws_sdk_securityhub::types::builders::AwsEc2SecurityGroupIpPermissionBuilder

#[non_exhaustive]
pub struct AwsEc2SecurityGroupIpPermissionBuilder { /* private fields */ }

A builder for AwsEc2SecurityGroupIpPermission.

Implementations

impl AwsEc2SecurityGroupIpPermissionBuilder

pub fn ip_protocol(self, input: impl Into<String>) -> Self

The IP protocol name (tcp, udp, icmp, icmpv6) or number.

[VPC only] Use -1 to specify all protocols.

When authorizing security group rules, specifying -1 or a protocol number other than tcp, udp, icmp, or icmpv6 allows traffic on all ports, regardless of any port range you specify.

For tcp, udp, and icmp, you must specify a port range.

For icmpv6, the port range is optional. If you omit the port range, traffic for all types and codes is allowed.

pub fn set_ip_protocol(self, input: Option<String>) -> Self

The IP protocol name (tcp, udp, icmp, icmpv6) or number.

[VPC only] Use -1 to specify all protocols.

When authorizing security group rules, specifying -1 or a protocol number other than tcp, udp, icmp, or icmpv6 allows traffic on all ports, regardless of any port range you specify.

For tcp, udp, and icmp, you must specify a port range.

For icmpv6, the port range is optional. If you omit the port range, traffic for all types and codes is allowed.

pub fn get_ip_protocol(&self) -> &Option<String>

The IP protocol name (tcp, udp, icmp, icmpv6) or number.

[VPC only] Use -1 to specify all protocols.

When authorizing security group rules, specifying -1 or a protocol number other than tcp, udp, icmp, or icmpv6 allows traffic on all ports, regardless of any port range you specify.

For tcp, udp, and icmp, you must specify a port range.

For icmpv6, the port range is optional. If you omit the port range, traffic for all types and codes is allowed.

pub fn from_port(self, input: i32) -> Self

The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.

A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.

pub fn set_from_port(self, input: Option<i32>) -> Self

The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.

A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.

pub fn get_from_port(&self) -> &Option<i32>

The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number.

A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.

pub fn to_port(self, input: i32) -> Self

The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.

A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.

pub fn set_to_port(self, input: Option<i32>) -> Self

The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.

A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.

pub fn get_to_port(&self) -> &Option<i32>

The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code.

A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.

pub fn user_id_group_pairs( self, input: AwsEc2SecurityGroupUserIdGroupPair ) -> Self

Appends an item to user_id_group_pairs.

To override the contents of this collection use set_user_id_group_pairs.

The security group and Amazon Web Services account ID pairs.

pub fn set_user_id_group_pairs( self, input: Option<Vec<AwsEc2SecurityGroupUserIdGroupPair>> ) -> Self

The security group and Amazon Web Services account ID pairs.

pub fn get_user_id_group_pairs( &self ) -> &Option<Vec<AwsEc2SecurityGroupUserIdGroupPair>>

The security group and Amazon Web Services account ID pairs.

pub fn ip_ranges(self, input: AwsEc2SecurityGroupIpRange) -> Self

Appends an item to ip_ranges.

To override the contents of this collection use set_ip_ranges.

The IPv4 ranges.

pub fn set_ip_ranges( self, input: Option<Vec<AwsEc2SecurityGroupIpRange>> ) -> Self

The IPv4 ranges.

pub fn get_ip_ranges(&self) -> &Option<Vec<AwsEc2SecurityGroupIpRange>>

The IPv4 ranges.

pub fn ipv6_ranges(self, input: AwsEc2SecurityGroupIpv6Range) -> Self

Appends an item to ipv6_ranges.

To override the contents of this collection use set_ipv6_ranges.

The IPv6 ranges.

pub fn set_ipv6_ranges( self, input: Option<Vec<AwsEc2SecurityGroupIpv6Range>> ) -> Self

The IPv6 ranges.

pub fn get_ipv6_ranges(&self) -> &Option<Vec<AwsEc2SecurityGroupIpv6Range>>

The IPv6 ranges.

pub fn prefix_list_ids(self, input: AwsEc2SecurityGroupPrefixListId) -> Self

Appends an item to prefix_list_ids.

To override the contents of this collection use set_prefix_list_ids.

[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.

pub fn set_prefix_list_ids( self, input: Option<Vec<AwsEc2SecurityGroupPrefixListId>> ) -> Self

[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.

pub fn get_prefix_list_ids( &self ) -> &Option<Vec<AwsEc2SecurityGroupPrefixListId>>

[VPC only] The prefix list IDs for an Amazon Web Services service. With outbound rules, this is the Amazon Web Services service to access through a VPC endpoint from instances associated with the security group.

pub fn build(self) -> AwsEc2SecurityGroupIpPermission

Consumes the builder and constructs a AwsEc2SecurityGroupIpPermission.

Trait Implementations

impl Clone for AwsEc2SecurityGroupIpPermissionBuilder

fn clone(&self) -> AwsEc2SecurityGroupIpPermissionBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AwsEc2SecurityGroupIpPermissionBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for AwsEc2SecurityGroupIpPermissionBuilder

fn default() -> AwsEc2SecurityGroupIpPermissionBuilder

Returns the “default value” for a type.

impl PartialEq for AwsEc2SecurityGroupIpPermissionBuilder

fn eq(&self, other: &AwsEc2SecurityGroupIpPermissionBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for AwsEc2SecurityGroupIpPermissionBuilder