Struct aws_sdk_sagemaker :: operation :: create_workforce :: builders :: CreateWorkforceInputBuilder Copy item path

impl CreateWorkforceInputBuilder

pub fn cognito_config(self, input: CognitoConfig) -> Self

Use this parameter to configure an Amazon Cognito private workforce. A single Cognito workforce is created using and corresponds to a single Amazon Cognito user pool.

Do not use OidcConfig if you specify values for CognitoConfig.

pub fn set_cognito_config(self, input: Option<CognitoConfig>) -> Self

Use this parameter to configure an Amazon Cognito private workforce. A single Cognito workforce is created using and corresponds to a single Amazon Cognito user pool.

Do not use OidcConfig if you specify values for CognitoConfig.

pub fn get_cognito_config(&self) -> &Option<CognitoConfig>

Use this parameter to configure an Amazon Cognito private workforce. A single Cognito workforce is created using and corresponds to a single Amazon Cognito user pool.

Do not use OidcConfig if you specify values for CognitoConfig.

pub fn oidc_config(self, input: OidcConfig) -> Self

Use this parameter to configure a private workforce using your own OIDC Identity Provider.

Do not use CognitoConfig if you specify values for OidcConfig.

pub fn set_oidc_config(self, input: Option<OidcConfig>) -> Self

Use this parameter to configure a private workforce using your own OIDC Identity Provider.

Do not use CognitoConfig if you specify values for OidcConfig.

pub fn get_oidc_config(&self) -> &Option<OidcConfig>

Use this parameter to configure a private workforce using your own OIDC Identity Provider.

Do not use CognitoConfig if you specify values for OidcConfig.

pub fn source_ip_config(self, input: SourceIpConfig) -> Self

A list of IP address ranges (CIDRs). Used to create an allow list of IP addresses for a private workforce. Workers will only be able to log in to their worker portal from an IP address within this range. By default, a workforce isn't restricted to specific IP addresses.

pub fn set_source_ip_config(self, input: Option<SourceIpConfig>) -> Self

A list of IP address ranges (CIDRs). Used to create an allow list of IP addresses for a private workforce. Workers will only be able to log in to their worker portal from an IP address within this range. By default, a workforce isn't restricted to specific IP addresses.

pub fn get_source_ip_config(&self) -> &Option<SourceIpConfig>

A list of IP address ranges (CIDRs). Used to create an allow list of IP addresses for a private workforce. Workers will only be able to log in to their worker portal from an IP address within this range. By default, a workforce isn't restricted to specific IP addresses.

pub fn workforce_name(self, input: impl Into<String>) -> Self

The name of the private workforce.

This field is required.

pub fn set_workforce_name(self, input: Option<String>) -> Self

The name of the private workforce.

pub fn get_workforce_name(&self) -> &Option<String>

The name of the private workforce.

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

An array of key-value pairs that contain metadata to help you categorize and organize our workforce. Each tag consists of a key and a value, both of which you define.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

An array of key-value pairs that contain metadata to help you categorize and organize our workforce. Each tag consists of a key and a value, both of which you define.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

An array of key-value pairs that contain metadata to help you categorize and organize our workforce. Each tag consists of a key and a value, both of which you define.

pub fn workforce_vpc_config(self, input: WorkforceVpcConfigRequest) -> Self

Use this parameter to configure a workforce using VPC.

pub fn set_workforce_vpc_config( self, input: Option<WorkforceVpcConfigRequest>, ) -> Self

Use this parameter to configure a workforce using VPC.

pub fn get_workforce_vpc_config(&self) -> &Option<WorkforceVpcConfigRequest>

Use this parameter to configure a workforce using VPC.

pub fn build(self) -> Result<CreateWorkforceInput, BuildError>

Consumes the builder and constructs a CreateWorkforceInput.

impl CreateWorkforceInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<CreateWorkforceOutput, SdkError<CreateWorkforceError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

impl Clone for CreateWorkforceInputBuilder

fn clone(&self) -> CreateWorkforceInputBuilder

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for CreateWorkforceInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for CreateWorkforceInputBuilder

fn default() -> CreateWorkforceInputBuilder

Returns the “default value” for a type. Read more

impl PartialEq for CreateWorkforceInputBuilder

fn eq(&self, other: &CreateWorkforceInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CreateWorkforceInputBuilder

Auto Trait Implementations§

impl UnwindSafe for CreateWorkforceInputBuilder

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more