#[non_exhaustive]pub struct DescribePipelineExecutionOutput {Show 13 fields
pub pipeline_arn: Option<String>,
pub pipeline_execution_arn: Option<String>,
pub pipeline_execution_display_name: Option<String>,
pub pipeline_execution_status: Option<PipelineExecutionStatus>,
pub pipeline_execution_description: Option<String>,
pub pipeline_experiment_config: Option<PipelineExperimentConfig>,
pub failure_reason: Option<String>,
pub creation_time: Option<DateTime>,
pub last_modified_time: Option<DateTime>,
pub created_by: Option<UserContext>,
pub last_modified_by: Option<UserContext>,
pub parallelism_configuration: Option<ParallelismConfiguration>,
pub selective_execution_config: Option<SelectiveExecutionConfig>,
/* private fields */
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.pipeline_arn: Option<String>The Amazon Resource Name (ARN) of the pipeline.
pipeline_execution_arn: Option<String>The Amazon Resource Name (ARN) of the pipeline execution.
pipeline_execution_display_name: Option<String>The display name of the pipeline execution.
pipeline_execution_status: Option<PipelineExecutionStatus>The status of the pipeline execution.
pipeline_execution_description: Option<String>The description of the pipeline execution.
pipeline_experiment_config: Option<PipelineExperimentConfig>Specifies the names of the experiment and trial created by a pipeline.
failure_reason: Option<String>If the execution failed, a message describing why.
creation_time: Option<DateTime>The time when the pipeline execution was created.
last_modified_time: Option<DateTime>The time when the pipeline execution was modified last.
created_by: Option<UserContext>Information about the user who created or modified an experiment, trial, trial component, lineage group, project, or model card.
last_modified_by: Option<UserContext>Information about the user who created or modified an experiment, trial, trial component, lineage group, project, or model card.
parallelism_configuration: Option<ParallelismConfiguration>The parallelism configuration applied to the pipeline.
selective_execution_config: Option<SelectiveExecutionConfig>The selective execution configuration applied to the pipeline run.
Implementations§
Source§impl DescribePipelineExecutionOutput
impl DescribePipelineExecutionOutput
Sourcepub fn pipeline_arn(&self) -> Option<&str>
pub fn pipeline_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the pipeline.
Sourcepub fn pipeline_execution_arn(&self) -> Option<&str>
pub fn pipeline_execution_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the pipeline execution.
Sourcepub fn pipeline_execution_display_name(&self) -> Option<&str>
pub fn pipeline_execution_display_name(&self) -> Option<&str>
The display name of the pipeline execution.
Sourcepub fn pipeline_execution_status(&self) -> Option<&PipelineExecutionStatus>
pub fn pipeline_execution_status(&self) -> Option<&PipelineExecutionStatus>
The status of the pipeline execution.
Sourcepub fn pipeline_execution_description(&self) -> Option<&str>
pub fn pipeline_execution_description(&self) -> Option<&str>
The description of the pipeline execution.
Sourcepub fn pipeline_experiment_config(&self) -> Option<&PipelineExperimentConfig>
pub fn pipeline_experiment_config(&self) -> Option<&PipelineExperimentConfig>
Specifies the names of the experiment and trial created by a pipeline.
Sourcepub fn failure_reason(&self) -> Option<&str>
pub fn failure_reason(&self) -> Option<&str>
If the execution failed, a message describing why.
Sourcepub fn creation_time(&self) -> Option<&DateTime>
pub fn creation_time(&self) -> Option<&DateTime>
The time when the pipeline execution was created.
Sourcepub fn last_modified_time(&self) -> Option<&DateTime>
pub fn last_modified_time(&self) -> Option<&DateTime>
The time when the pipeline execution was modified last.
Sourcepub fn created_by(&self) -> Option<&UserContext>
pub fn created_by(&self) -> Option<&UserContext>
Information about the user who created or modified an experiment, trial, trial component, lineage group, project, or model card.
Sourcepub fn last_modified_by(&self) -> Option<&UserContext>
pub fn last_modified_by(&self) -> Option<&UserContext>
Information about the user who created or modified an experiment, trial, trial component, lineage group, project, or model card.
Sourcepub fn parallelism_configuration(&self) -> Option<&ParallelismConfiguration>
pub fn parallelism_configuration(&self) -> Option<&ParallelismConfiguration>
The parallelism configuration applied to the pipeline.
Sourcepub fn selective_execution_config(&self) -> Option<&SelectiveExecutionConfig>
pub fn selective_execution_config(&self) -> Option<&SelectiveExecutionConfig>
The selective execution configuration applied to the pipeline run.
Source§impl DescribePipelineExecutionOutput
impl DescribePipelineExecutionOutput
Sourcepub fn builder() -> DescribePipelineExecutionOutputBuilder
pub fn builder() -> DescribePipelineExecutionOutputBuilder
Creates a new builder-style object to manufacture DescribePipelineExecutionOutput.
Trait Implementations§
Source§impl Clone for DescribePipelineExecutionOutput
impl Clone for DescribePipelineExecutionOutput
Source§fn clone(&self) -> DescribePipelineExecutionOutput
fn clone(&self) -> DescribePipelineExecutionOutput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl PartialEq for DescribePipelineExecutionOutput
impl PartialEq for DescribePipelineExecutionOutput
Source§fn eq(&self, other: &DescribePipelineExecutionOutput) -> bool
fn eq(&self, other: &DescribePipelineExecutionOutput) -> bool
self and other values to be equal, and is used by ==.Source§impl RequestId for DescribePipelineExecutionOutput
impl RequestId for DescribePipelineExecutionOutput
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None if the service could not be reached.impl StructuralPartialEq for DescribePipelineExecutionOutput
Auto Trait Implementations§
impl Freeze for DescribePipelineExecutionOutput
impl RefUnwindSafe for DescribePipelineExecutionOutput
impl Send for DescribePipelineExecutionOutput
impl Sync for DescribePipelineExecutionOutput
impl Unpin for DescribePipelineExecutionOutput
impl UnwindSafe for DescribePipelineExecutionOutput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);