#[non_exhaustive]pub struct PipelineExecution {Show 14 fields
pub pipeline_arn: Option<String>,
pub pipeline_execution_arn: Option<String>,
pub pipeline_execution_display_name: Option<String>,
pub pipeline_execution_status: Option<PipelineExecutionStatus>,
pub pipeline_execution_description: Option<String>,
pub pipeline_experiment_config: Option<PipelineExperimentConfig>,
pub failure_reason: Option<String>,
pub creation_time: Option<DateTime>,
pub last_modified_time: Option<DateTime>,
pub created_by: Option<UserContext>,
pub last_modified_by: Option<UserContext>,
pub parallelism_configuration: Option<ParallelismConfiguration>,
pub selective_execution_config: Option<SelectiveExecutionConfig>,
pub pipeline_parameters: Option<Vec<Parameter>>,
}Expand description
An execution of a pipeline.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.pipeline_arn: Option<String>The Amazon Resource Name (ARN) of the pipeline that was executed.
pipeline_execution_arn: Option<String>The Amazon Resource Name (ARN) of the pipeline execution.
pipeline_execution_display_name: Option<String>The display name of the pipeline execution.
pipeline_execution_status: Option<PipelineExecutionStatus>The status of the pipeline status.
pipeline_execution_description: Option<String>The description of the pipeline execution.
pipeline_experiment_config: Option<PipelineExperimentConfig>Specifies the names of the experiment and trial created by a pipeline.
failure_reason: Option<String>If the execution failed, a message describing why.
creation_time: Option<DateTime>The creation time of the pipeline execution.
last_modified_time: Option<DateTime>The time that the pipeline execution was last modified.
created_by: Option<UserContext>Information about the user who created or modified an experiment, trial, trial component, lineage group, project, or model card.
last_modified_by: Option<UserContext>Information about the user who created or modified an experiment, trial, trial component, lineage group, project, or model card.
parallelism_configuration: Option<ParallelismConfiguration>The parallelism configuration applied to the pipeline execution.
selective_execution_config: Option<SelectiveExecutionConfig>The selective execution configuration applied to the pipeline run.
pipeline_parameters: Option<Vec<Parameter>>Contains a list of pipeline parameters. This list can be empty.
Implementations§
Source§impl PipelineExecution
impl PipelineExecution
Sourcepub fn pipeline_arn(&self) -> Option<&str>
pub fn pipeline_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the pipeline that was executed.
Sourcepub fn pipeline_execution_arn(&self) -> Option<&str>
pub fn pipeline_execution_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the pipeline execution.
Sourcepub fn pipeline_execution_display_name(&self) -> Option<&str>
pub fn pipeline_execution_display_name(&self) -> Option<&str>
The display name of the pipeline execution.
Sourcepub fn pipeline_execution_status(&self) -> Option<&PipelineExecutionStatus>
pub fn pipeline_execution_status(&self) -> Option<&PipelineExecutionStatus>
The status of the pipeline status.
Sourcepub fn pipeline_execution_description(&self) -> Option<&str>
pub fn pipeline_execution_description(&self) -> Option<&str>
The description of the pipeline execution.
Sourcepub fn pipeline_experiment_config(&self) -> Option<&PipelineExperimentConfig>
pub fn pipeline_experiment_config(&self) -> Option<&PipelineExperimentConfig>
Specifies the names of the experiment and trial created by a pipeline.
Sourcepub fn failure_reason(&self) -> Option<&str>
pub fn failure_reason(&self) -> Option<&str>
If the execution failed, a message describing why.
Sourcepub fn creation_time(&self) -> Option<&DateTime>
pub fn creation_time(&self) -> Option<&DateTime>
The creation time of the pipeline execution.
Sourcepub fn last_modified_time(&self) -> Option<&DateTime>
pub fn last_modified_time(&self) -> Option<&DateTime>
The time that the pipeline execution was last modified.
Sourcepub fn created_by(&self) -> Option<&UserContext>
pub fn created_by(&self) -> Option<&UserContext>
Information about the user who created or modified an experiment, trial, trial component, lineage group, project, or model card.
Sourcepub fn last_modified_by(&self) -> Option<&UserContext>
pub fn last_modified_by(&self) -> Option<&UserContext>
Information about the user who created or modified an experiment, trial, trial component, lineage group, project, or model card.
Sourcepub fn parallelism_configuration(&self) -> Option<&ParallelismConfiguration>
pub fn parallelism_configuration(&self) -> Option<&ParallelismConfiguration>
The parallelism configuration applied to the pipeline execution.
Sourcepub fn selective_execution_config(&self) -> Option<&SelectiveExecutionConfig>
pub fn selective_execution_config(&self) -> Option<&SelectiveExecutionConfig>
The selective execution configuration applied to the pipeline run.
Sourcepub fn pipeline_parameters(&self) -> &[Parameter]
pub fn pipeline_parameters(&self) -> &[Parameter]
Contains a list of pipeline parameters. This list can be empty.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .pipeline_parameters.is_none().
Source§impl PipelineExecution
impl PipelineExecution
Sourcepub fn builder() -> PipelineExecutionBuilder
pub fn builder() -> PipelineExecutionBuilder
Creates a new builder-style object to manufacture PipelineExecution.
Trait Implementations§
Source§impl Clone for PipelineExecution
impl Clone for PipelineExecution
Source§fn clone(&self) -> PipelineExecution
fn clone(&self) -> PipelineExecution
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for PipelineExecution
impl Debug for PipelineExecution
Source§impl PartialEq for PipelineExecution
impl PartialEq for PipelineExecution
impl StructuralPartialEq for PipelineExecution
Auto Trait Implementations§
impl Freeze for PipelineExecution
impl RefUnwindSafe for PipelineExecution
impl Send for PipelineExecution
impl Sync for PipelineExecution
impl Unpin for PipelineExecution
impl UnwindSafe for PipelineExecution
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);