Struct aws_sdk_sagemaker::model::hyper_parameter_training_job_definition::Builder

#[non_exhaustive]
pub struct Builder { /* private fields */ }

A builder for HyperParameterTrainingJobDefinition

Implementations

impl Builder

pub fn definition_name(self, input: impl Into<String>) -> Self

The job definition name.

pub fn set_definition_name(self, input: Option<String>) -> Self

The job definition name.

pub fn tuning_objective(self, input: HyperParameterTuningJobObjective) -> Self

Defines the objective metric for a hyperparameter tuning job. Hyperparameter tuning uses the value of this metric to evaluate the training jobs it launches, and returns the training job that results in either the highest or lowest value for this metric, depending on the value you specify for the Type parameter.

pub fn set_tuning_objective(
    self,
    input: Option<HyperParameterTuningJobObjective>
) -> Self

Defines the objective metric for a hyperparameter tuning job. Hyperparameter tuning uses the value of this metric to evaluate the training jobs it launches, and returns the training job that results in either the highest or lowest value for this metric, depending on the value you specify for the Type parameter.

pub fn hyper_parameter_ranges(self, input: ParameterRanges) -> Self

Specifies ranges of integer, continuous, and categorical hyperparameters that a hyperparameter tuning job searches. The hyperparameter tuning job launches training jobs with hyperparameter values within these ranges to find the combination of values that result in the training job with the best performance as measured by the objective metric of the hyperparameter tuning job.

You can specify a maximum of 20 hyperparameters that a hyperparameter tuning job can search over. Every possible value of a categorical parameter range counts against this limit.

pub fn set_hyper_parameter_ranges(self, input: Option<ParameterRanges>) -> Self

Specifies ranges of integer, continuous, and categorical hyperparameters that a hyperparameter tuning job searches. The hyperparameter tuning job launches training jobs with hyperparameter values within these ranges to find the combination of values that result in the training job with the best performance as measured by the objective metric of the hyperparameter tuning job.

You can specify a maximum of 20 hyperparameters that a hyperparameter tuning job can search over. Every possible value of a categorical parameter range counts against this limit.

pub fn static_hyper_parameters(
    self,
    k: impl Into<String>,
    v: impl Into<String>
) -> Self

Adds a key-value pair to static_hyper_parameters.

To override the contents of this collection use set_static_hyper_parameters.

Specifies the values of hyperparameters that do not change for the tuning job.

pub fn set_static_hyper_parameters(
    self,
    input: Option<HashMap<String, String>>
) -> Self

Specifies the values of hyperparameters that do not change for the tuning job.

pub fn algorithm_specification(
    self,
    input: HyperParameterAlgorithmSpecification
) -> Self

The HyperParameterAlgorithmSpecification object that specifies the resource algorithm to use for the training jobs that the tuning job launches.

pub fn set_algorithm_specification(
    self,
    input: Option<HyperParameterAlgorithmSpecification>
) -> Self

The HyperParameterAlgorithmSpecification object that specifies the resource algorithm to use for the training jobs that the tuning job launches.

pub fn role_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the IAM role associated with the training jobs that the tuning job launches.

pub fn set_role_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the IAM role associated with the training jobs that the tuning job launches.

pub fn input_data_config(self, input: Channel) -> Self

Appends an item to input_data_config.

To override the contents of this collection use set_input_data_config.

An array of Channel objects that specify the input for the training jobs that the tuning job launches.

pub fn set_input_data_config(self, input: Option<Vec<Channel>>) -> Self

An array of Channel objects that specify the input for the training jobs that the tuning job launches.

pub fn vpc_config(self, input: VpcConfig) -> Self

The VpcConfig object that specifies the VPC that you want the training jobs that this hyperparameter tuning job launches to connect to. Control access to and from your training container by configuring the VPC. For more information, see Protect Training Jobs by Using an Amazon Virtual Private Cloud.

pub fn set_vpc_config(self, input: Option<VpcConfig>) -> Self

The VpcConfig object that specifies the VPC that you want the training jobs that this hyperparameter tuning job launches to connect to. Control access to and from your training container by configuring the VPC. For more information, see Protect Training Jobs by Using an Amazon Virtual Private Cloud.

pub fn output_data_config(self, input: OutputDataConfig) -> Self

Specifies the path to the Amazon S3 bucket where you store model artifacts from the training jobs that the tuning job launches.

pub fn set_output_data_config(self, input: Option<OutputDataConfig>) -> Self

Specifies the path to the Amazon S3 bucket where you store model artifacts from the training jobs that the tuning job launches.

pub fn resource_config(self, input: ResourceConfig) -> Self

The resources, including the compute instances and storage volumes, to use for the training jobs that the tuning job launches.

Storage volumes store model artifacts and incremental states. Training algorithms might also use storage volumes for scratch space. If you want Amazon SageMaker to use the storage volume to store the training data, choose File as the TrainingInputMode in the algorithm specification. For distributed training algorithms, specify an instance count greater than 1.

pub fn set_resource_config(self, input: Option<ResourceConfig>) -> Self

The resources, including the compute instances and storage volumes, to use for the training jobs that the tuning job launches.

Storage volumes store model artifacts and incremental states. Training algorithms might also use storage volumes for scratch space. If you want Amazon SageMaker to use the storage volume to store the training data, choose File as the TrainingInputMode in the algorithm specification. For distributed training algorithms, specify an instance count greater than 1.

pub fn stopping_condition(self, input: StoppingCondition) -> Self

Specifies a limit to how long a model hyperparameter training job can run. It also specifies how long a managed spot training job has to complete. When the job reaches the time limit, Amazon SageMaker ends the training job. Use this API to cap model training costs.

pub fn set_stopping_condition(self, input: Option<StoppingCondition>) -> Self

Specifies a limit to how long a model hyperparameter training job can run. It also specifies how long a managed spot training job has to complete. When the job reaches the time limit, Amazon SageMaker ends the training job. Use this API to cap model training costs.

pub fn enable_network_isolation(self, input: bool) -> Self

Isolates the training container. No inbound or outbound network calls can be made, except for calls between peers within a training cluster for distributed training. If network isolation is used for training jobs that are configured to use a VPC, Amazon SageMaker downloads and uploads customer data and model artifacts through the specified VPC, but the training container does not have network access.

pub fn set_enable_network_isolation(self, input: Option<bool>) -> Self

Isolates the training container. No inbound or outbound network calls can be made, except for calls between peers within a training cluster for distributed training. If network isolation is used for training jobs that are configured to use a VPC, Amazon SageMaker downloads and uploads customer data and model artifacts through the specified VPC, but the training container does not have network access.

pub fn enable_inter_container_traffic_encryption(self, input: bool) -> Self

To encrypt all communications between ML compute instances in distributed training, choose True. Encryption provides greater security for distributed training, but training might take longer. How long it takes depends on the amount of communication between compute instances, especially if you use a deep learning algorithm in distributed training.

pub fn set_enable_inter_container_traffic_encryption(
    self,
    input: Option<bool>
) -> Self

To encrypt all communications between ML compute instances in distributed training, choose True. Encryption provides greater security for distributed training, but training might take longer. How long it takes depends on the amount of communication between compute instances, especially if you use a deep learning algorithm in distributed training.

pub fn enable_managed_spot_training(self, input: bool) -> Self

A Boolean indicating whether managed spot training is enabled (True) or not (False).

pub fn set_enable_managed_spot_training(self, input: Option<bool>) -> Self

A Boolean indicating whether managed spot training is enabled (True) or not (False).

pub fn checkpoint_config(self, input: CheckpointConfig) -> Self

Contains information about the output location for managed spot training checkpoint data.

pub fn set_checkpoint_config(self, input: Option<CheckpointConfig>) -> Self

Contains information about the output location for managed spot training checkpoint data.

pub fn retry_strategy(self, input: RetryStrategy) -> Self

The number of times to retry the job when the job fails due to an InternalServerError.

pub fn set_retry_strategy(self, input: Option<RetryStrategy>) -> Self

The number of times to retry the job when the job fails due to an InternalServerError.

pub fn build(self) -> HyperParameterTrainingJobDefinition

Consumes the builder and constructs a HyperParameterTrainingJobDefinition

Trait Implementations

impl Clone for Builder

fn clone(&self) -> Builder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Builder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Builder

fn default() -> Builder

Returns the “default value” for a type.

impl PartialEq<Builder> for Builder

fn eq(&self, other: &Builder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Builder) -> bool

This method tests for !=.

impl StructuralPartialEq for Builder